iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12341:1998

(Main)

Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

This standard specifies the performance of PM10 sampling instruments in order to harmonize the monitoring within the framework of the European Union Council Directive 96/62/EC (2) on ambient air quality assessment and management, and the first daughter directive. In the daughter directive, by convention the ISO thoracic sampling convention has been assimilated to the PM10 fraction (see annex A; (3)).

Luftbeschaffenheit - Ermittlung der PM10-Fraktion von Schwebstaub - Referenzmethode und Feldprüfverfahren zum Nachweis der Gleichwertigkeit von Meßverfahren und Referenzmeßmethode

Diese Norm legt die Leistungsmerkmale von PM10-Probenahmegeräten fest, um die meßtechnische Überwachung im Rahmen der Richtlinie 96/62/EC des Rates der Europäischen Union über die Beurteilung und Kontrolle der Luftqualität (2) sowie der ersten Tochterrichtlinie zu vereinheitlichen. In der Tochterrichtlinie werden aufgrund einer Vereinbarung die Probenahme-Konvention für die thorakale Fraktion nach ISO und die PM10-Fraktion (siehe Anhang A; (3))im gleichen Sinne verwendet.

Qualité de l'air - Détermination de la fraction MP10 de matière particulaire en suspension - Méthode de référence et procédure d'essai in situ pour démontrer l'équivalence à la référence de méthodes de mesurage

La présente norme spécifie les performances des instruments d'échantillonnage de la fraction MP10 pour harmoniser la surveillance selon la directive du Conseil de l'Union Européenne 96/62/CE (2) relative à l'évaluation et à la gestion de la qualité de l'air et selon la directive fille. Dans la directive fille, par convention, la convention d'échantillonnage thoracique de l'ISO a été assimilée à la fraction MP10 (voir annexe A (3)).

Kakovost zraka – Določevanje frakcije PM10 ledbečih trdnih delcev – Referenčna metoda in terenski preskusni postopek za potrditev ustreznosti merilnih metod

General Information

Status
Withdrawn
Publication Date
17-Nov-1998
Withdrawal Date
20-May-2014
ICS
13.040.20 - Ambient atmospheres
61.040 - Headgear. Clothing accessories. Fastening of clothing
Technical Committee
CEN/TC 264 - Air quality
Drafting Committee
CEN/TC 264/WG 6 - Suspended particulate matter below 10 micro meter (ambient air)
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-May-2014
Completion Date
21-May-2014
Directive
1999/30/EC - Limit values for sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter and lead in ambient air
96/62/EC - Ambient air quality assessment and management
Mandate
M/003 - Mandate for standardization by CEN - Test procedure allowing to show in real conditions the equivalence of the sampling procedures of the fine particles (up to 10 um) suspended in the ambient air in conformity with the Community directives
Ref Project
SIST EN 12341:2000 - Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

Relations

Replaced By
EN 12341:2014 - Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Effective Date
28-May-2014

Buy Standard

EN 12341:2000EN 12341:2000
PreviousNext
Standard
EN 12341:2000
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftbeschaffenheit - Ermittlung der PM10-Fraktion von Schwebstaub - Referenzmethode und Feldprüfverfahren zum Nachweis der Gleichwertigkeit von Meßverfahren und ReferenzmeßmethodeQualité de l'air - Détermination de la fraction MP10 de matiere particulaire en suspension - Méthode de référence et procédure d'essai in situ pour démontrer l'équivalence a la référence de méthodes de mesurageAir quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods13.040.20Kakovost okol
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17948:2024(Main)
Maintenance management and functions
kSIST FprEN 17948:2024

This document specifies the main content of maintenance management and the main activities for which maintenance management is responsible.
This document is applicable to maintenance managers and asset managers in the industry sector and for infrastructure and buildings in order to achieve the success factors of the organization.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
kSIST FprEN 556-2:2024

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/CLC/TR 18115:2024(Main)
Data governance and quality for AI within the European context
kSIST-TP FprCEN/CLC/TR 18115:2024

This document provides an overview on AI-related standards, with a focus on data and data life cycles, to organizations, agencies, enterprises, developers, universities, researchers, focus groups, users, and other stakeholders that are experiencing this era of digital transformation.
It describes links among the many international standards and regulations published or under development, with the aim of promoting a common language, a greater culture of quality, giving an information framework.
It addresses the following areas:
-   data governance;
-   data quality;
-   elements for data, data sets properties to provide unbiased evaluation and information for testing.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
kSIST FprEN 17992:2024

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-16:2024(Main)
Geotechnical investigation and testing - Field testing - Part 16: Borehole shear test (ISO 22476‑16:2024)
kSIST FprEN ISO 22476-16:2023

This document is applicable to the borehole shear test using the phicometer procedure, commonly named the phicometer test (etymologically derived from phi for friction angle, co for cohesion and meter for measurement).
The test can be performed in all types of natural soils, fills and artificial soils, which can be saturated or not.
It does not apply to very soft fine soils, very loose coarse soils, medium strong to very strong rocks and natural or artificial soils with a predominance of cobbles having a particle diameter greater than 150 mm.
Generally, the test is applicable in soils with an order of magnitude of their in situ resistance characteristics as follows:
—     Ménard pressuremeter limit pressure: 0,4 MPa < plM < 3,5 MPa approximately or more than 4 MPa in granular non-cohesive soils;
—     CPT Cone resistance: 1,5 MPa —     SPT N: 8 The test can also be carried out in soils presenting a resistance outside these application limits as long as the representativeness of the results is assessed or validated by the analysis of the PBST graphs (see Clause 8).
This document applies only to tests carried out at a depth less than or equal to 30 m.
The parameters derived from this test are the shear strength properties, as the cohesion and angle of friction.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-1:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
KSIST FprEN 16214-1:2023

This document specifies the terminology to be used in the field of sustainability and greenhouse gas emission saving criteria for biomass for energy applications. This document specifically considers some relevant terms and definitions used in European Commission Directive 2018/EU/2001, the recast of the Renewable Energy Directive (RED II), and the European Commission Directive 2009/30/EC referred to as Fuel Quality Directive (FQD), or in other related European regulations.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
kSIST FprEN 18003:2024

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12735-2:2024(Main)
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
kSIST FprEN 12735-2:2024

This document specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes, smooth or inner finned, used for heat exchangers and their internal connecting pipes in the manufacturing of refrigeration and air conditioning equipment.
It is applicable to tubes with an outside diameter from 3,97 mm up to and including 219 mm.
NOTE   The tubes are supplied in straight length or as coils.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day