Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows

This document is applicable to single and double leaf, hinged and pivoted metal framed, glazed doorsets or openable windows as covered by EN 15269 5 or EN 15269 20.
This document prescribes the methodology for extending the application of test results obtained from durability of self-closing test(s) conducted in accordance with EN 1191.
Subject to the completion of the appropriate self-closing test(s), the extended application can cover all or some of the following non-exhaustive list:
-   doorsets and openable windows;
-   door or window leaves;
-   wall or ceiling fixed elements (frame or suspension system);
-   glazing and non-glazed panels in doorset and openable window, side, transom and/or overpanels;
-   items of building hardware;
-   decorative finishes;
-   intumescent, smoke, draught or acoustic seals;
-   alternative supporting construction(s).

Erweiterter Anwendungsbereich von Prüfergebnissen zur Dauerhaftigkeit der Selbstschließung für Türen und zu öffnende Fenster - Teil 4: Dauerhaftigkeit der Selbstschließung von verglasten Drehflügeltüren und zu öffnenden Fenstern mit Metall(rohr)rahmen mit Feuerwiderstands- und/oder Rauchdichtigkeitseigenschaften

Dieses Dokument ist anzuwenden für ein- und zweiflügelige verglaste Drehflügeltüren und zu öffnende Fenster mit Metallrahmen, wie sie in EN 15269 5 oder EN 15269 20 beschrieben werden.
Das vorliegende Dokument schreibt die Methodik für die Erweiterung der Anwendung der Prüfergebnisse vor, die aus Prüfungen der Dauerhaftigkeit der Selbstschließung erhalten wurden, die in Übereinstimmung mit EN 1191 durchgeführt wurden.
In Abhängigkeit des Abschlusses der entsprechenden Selbstschließungsprüfung(en) kann die erweiterte Anwendung alle oder einige Elemente der folgenden unvollständigen Liste abdecken:
- Türen und zu öffnende Fenster;
- Tür- oder Fensterflügel;
- an der Wand oder Decke befestigte Elemente (Rahmen- oder Suspensionssystem);
- Verglasung und nicht verglaste Paneele in Türen und zu öffnenden Fenstern, Seitenteile, Oberteile mit Kämpfer und/oder obere Türblenden;
- Baubeschlagelemente;
- Dekorative Oberflächenausführungen;
- dämmschichtbildende Dichtungen, sowie Dichtungen zur Behinderung von Rauchdurchtritt (Rauch-schutzdichtungen), Durchzug oder Schallübertragung (Schallschutzdichtungen);
- alternative Tragkonstruktion(en).

Application étendue des résultats d’essais de durabilité de la fermeture automatique des blocs-portes et fenêtres ouvrantes - Partie 4 : Durabilité de la fermeture automatique des blocs-portes vitrés battants et pivotants à ossature métallique et des fenêtres ouvrantes à ossature métallique résistants au feu et/ou étanches à la fumée

Le présent document s’applique aux blocs-portes vitrés battants et pivotants à ossature métallique et aux fenêtres ouvrantes à ossature métallique, à un ou deux vantaux, visés par l’EN 15269 5 ou l’EN 15269 20.
Ce document établit la méthodologie d’extension de l’application des résultats d’essai obtenus suite aux essais de durabilité de la fermeture automatique réalisés conformément à l’EN 1191.
Sous réserve de la réalisation de l’essai ou des essais appropriés de fermeture automatique, l’application étendue peut couvrir tout ou partie des éléments de la liste non exhaustive suivante :
-   blocs-portes et fenêtres ouvrantes ;
-   vantaux de bloc-porte ou de fenêtre ;
-   éléments fixes muraux ou de plafond (structure ou système de suspension) ;
-   vitrages et panneaux non vitrés d’un bloc-porte ou d’une fenêtre ouvrante, de panneaux latéraux et/ou d’impostes ;
-   tout élément de quincaillerie de bâtiment ;
-   finitions décoratives ;
-   joints intumescents, joints d’étanchéité aux fumées, joints d’étanchéité à l’air ou joints acoustiques ;
-   autre(s) support(s).

Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za vrata in okna, ki se odpirajo - 4. del: Trajnost samozapiranja požarno odpornih in/ali dimotesnih zastekljenih vrat v kovinskih okvirjih z vrtljivim krilom in oken, ki se odpirajo

General Information

Status
Published
Publication Date
11-May-2021
Withdrawal Date
29-Nov-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-May-2021
Due Date
26-Aug-2021
Completion Date
12-May-2021

Buy Standard

Standard
EN 17020-4:2021
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za vrata in okna,
ki se odpirajo - 4. del: Trajnost samozapiranja požarno odpornih in/ali dimotesnih
zastekljenih vrat v kovinskih okvirjih z vrtljivim krilom in oken, ki se odpirajo
Extended application of test results on durability of self-closing for doorsets and
openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke
control hinged and pivoted metal framed glazed doorsets and openable windows
Erweiterter Anwendungsbereich von Prüfergebnissen zur Dauerhaftigkeit der
Selbstschließung für Türen und zu öffnende Fenster - Teil 4: Dauerhaftigkeit der
Selbstschließung von verglasten Drehflügeltüren und zu öffnenden Fenstern mit Metall
(rohr)rahmen mit Feuerwiderstandseigenschaften
Application étendue des résultats d ’essais de durabilité de la fermeture automatique des
blocs-portes et fenêtres ouvrantes - Partie 4 : Durabilité de la fermeture automatique des
blocs-portes vitrés battants et pivotants à ossature métallique et des fenêtres ouvrantes
à ossature métallique résistants au feu et/ou étanches à la fumée
Ta slovenski standard je istoveten z: EN 17020-4:2021
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17020-4
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 13.220.50; 91.060.50
English Version
Extended application of test results on durability of self-
closing for doorsets and openable windows - Part 4:
Durability of self-closing of fire resistance and/or smoke
control hinged and pivoted metal framed glazed doorsets
and openable windows
Application étendue des résultats d'essais de durabilité Erweiterter Anwendungsbereich von Prüfergebnissen
de la fermeture automatique des blocs-portes et zur Dauerhaftigkeit der Selbstschließung für Türen
fenêtres ouvrantes - Partie 4 : Durabilité de la und zu öffnende Fenster - Teil 4: Dauerhaftigkeit der
fermeture automatique des blocs-portes vitrés battants Selbstschließung von verglasten Drehflügeltüren und
et pivotants à ossature métallique et des fenêtres zu öffnenden Fenstern mit Metall(rohr)rahmen mit
ouvrantes à ossature métallique résistants au feu et/ou Feuerwiderstandseigenschaften
étanches à la fumée
This European Standard was approved by CEN on 12 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17020-4:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Determination of the field of extended application . 7
4.1 General . 7
4.2 Procedure for evaluation . 7
4.3 Procedure for maximum field of extended application . 7
4.4 Interpretation of test results . 8
5 Extended application report . 8
6 Classification report . 8
Annex A (normative) Construction parameter variations . 9
Annex B (normative) Construction parameter variation simulation by applying additional
weights . 54
Bibliography . 55

European foreword
This document (EN 17020-4:2021) has been prepared by Technical Committee CEN/TC 127 “Fire safety
in buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards shall
be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
The EN 15269 series of standards covering extended application of test results for fire resistance and/or
smoke control for door, shutter and openable window assemblies, including their items of building
hardware, does not include the durability of self-closing of the doorsets following an extended application
process. This document is one of the EN 17020 series of standards intended to be used for the purpose of
producing an extended application report based on the evaluation of one or more durability of self-
closing tests. These European Standards may also be used to identify the best selection of test specimens
required to cover a wide range of product variations.
1 Scope
This document is applicable to single and double leaf, hinged and pivoted metal framed, glazed doorsets
or openable windows as covered by EN 15269-5 or EN 15269-20.
This document prescribes the methodology for extending the application of test results obtained from
durability of self-closing test(s) conducted in accordance with EN 1191.
Subject to the completion of the appropriate self-closing test(s), the extended application can cover all or
some of the following non-exhaustive list:
— doorsets and openable windows;
— door or window leaves;
— wall or ceiling fixed elements (frame or suspension system);
— glazing and non-glazed panels in doorset and openable window, side, transom and/or overpanels;
— items of building hardware;
— decorative finishes;
— intumescent, smoke, draught or acoustic seals;
— alternative supporting construction(s).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1125, Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes -
Requirements and test methods
EN 1154, Building hardware - Controlled door closing devices - Requirements and test methods
EN 1158, Building hardware - Door coordinator devices - Requirements and test methods
EN 1191, Windows and doors - Resistance to repeated opening and closing - Test method
EN 1363-1, Fire resistance tests - Part 1: General requirements
EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable
windows
EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 16035, Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate
the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets
and/or openable windows
EN 1935, Building hardware - Single-axis hinges - Requirements and test methods
EN 12209, Building hardware - Mechanically operated locks and locking plates - Requirements and test
methods
EN 12519, Windows and pedestrian doors - Terminology
EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using
data from reaction to fire tests
EN 13501-2:2016, Fire classification of construction products and building elements - Part 2: Classification
using data from fire resistance tests, excluding ventilation services
EN 13637, Building hardware - Electrically controlled exit systems for use on escape routes - Requirements
and test methods
EN 14846, Building hardware - Locks and latches - Electromechanically operated locks and striking plates
- Requirements and test methods
EN 15269-1, Extended application of test results for fire resistance and/or smoke control for door, shutter
and openable window assemblies, including their elements of building hardware - Part 1: General
requirements
EN 15269-5:2014+A1:2016, Extended application of test results for fire resistance and/or smoke control
for door, shutter and openable window assemblies, including their elements of building hardware - Part 5:
Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
EN 15269-20, Extended application of test results for fire resistance and/or smoke control for door, shutter
and openable window assemblies, including their elements of building hardware - Part 20: Smoke control
for doors, shutters, operable fabric curtains and openable windows
EN 15685 , Building hardware - Requirements and test methods - Multipoint locks, latches and locking
plates - Characteristics and test methods
EN 16034, Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product
standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 179, Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on
escape routes - Requirements and test methods
EN ISO 13943, Fire safety - Vocabulary (ISO 13943)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1191, EN 1363-1, EN ISO 13943,
EN 1634-1, EN 1634-3, EN 12519, EN 15269-1, EN 15269-5 and EN 15269-20, and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at https://www.electropedia.org/

Under preparation. Stage at the time of publication: prEN 15685.
3.1
full scale test
test of a full size doorset/openable window in accordance with EN 1191
4 Determination of the field of extended application
4.1 General
4.1.1 Before there can be any consideration for extended application, the doorset/openable window
shall have been tested in accordance with EN 1191 to achieve a test result which could generate a
classification in accordance with EN 13501-2 or correspond to a use category according to EN 16034.
4.1.2 A review of the doorset/openable window construction parameters can indicate that one or more
characteristics can be improved by a particular para
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.