CEN ISO/TS 14907-2:2011
(Main)Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2011)
Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2011)
ISO/TS 14907-2:2011 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011, for electronic fee collection (EFC) applications. After the tests of isolated data items and functions, an example is given for testing of a complete EFC transaction.
ISO/TS 14907-2:2011 comprises definitions of OBU conformance assessment tests of
basic dedicated short-range communication (DSRC) L7 functionality,
EFC application functions,
EFC attributes (i.e. EFC application information),
the addressing procedures of EFC attributes and (hardware) components [e.g. integrated circuit cards (ICC) and man-machine interfaces (MMI)],
the EFC transaction model, which defines the common elements and steps of any EFC transaction, and
the behaviour of the interface so as to support interoperability on an EFC-DSRC application interface level.
It also defines tests that
assess OBU capabilities,
assess OBU behaviour,
serve as a guide for OBU conformance evaluation and type approval,
achieve comparability between the results of the corresponding tests applied in different places at different times, and
facilitate communications between parties.
It is outside the scope of ISO/TS 14907-2:2011 to define tests that assess
performance,
robustness, and
reliability of an implementation.
Elektronische Gebührenerhebung - Testverfahren für Nutzer und feste Ausrüstung - Teil 2: Konformitätsprüfung der Anwendungsschnittstelle von fahrzeuginternen Einheiten (ISO/TS 14907-2:2011)
Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 2: Essai de conformité de l'interface d'application de l'unité embarquée (ISO/TS 14907-2:2011)
Elektronsko pobiranje cestnine - Postopki za preskušanje opreme - 2. del: Preskus skladnosti za aplikacijski vmesnik vgrajene enote za elektronsko cestninjenje (ISO/TS 14907-2:2011)
Ta del ISO/TS 14907 opisuje preskuse, ki potrjujejo skladnost vgrajene enote (OBU) z izvedbo funkcij in podatkovnih struktur, kot je določeno v izjavi o skladnosti izvedbe, temelječi na ISO 14906:2011, ki se uporabljajo za elektronsko pobiranje pristojbin (EFC). Po preskusih izoliranih podatkovnih predmetov in funkcij (C.1-C.2) je podan primer za preskušanje celotne EFC transakcije (C.3). Ta del ISO/TS 14907 vsebuje definicije OBU ocenjevalnega preskusa skladnosti za – funkcionalnost osnovne namenske kratkovalovne komunikacije (DSRC) L7, - EFC aplikacijske funkcije, - EFC atribute (tj. EFC aplikacijske informacije), - postopki naslavljanja EFC atributov in komponent (strojne opreme) [npr. vgrajene kartice z integriranim vezjem (ICC) in vmesnike človek-stroj (MMI)], - EFC transakcijski model, ki določa splošne elemente in korake vsake EFC transakcije in – obnašanja vmesnika za podpiranje interoperabilnosti EFC-DSRC stopnje aplikacijskega vmesnika.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2011
1DGRPHãþD
SIST-TS CEN ISO/TS 14907-2:2006
Elektronsko pobiranje cestnine - Postopki za preskušanje opreme - 2. del: Preskus
skladnosti za aplikacijski vmesnik vgrajene enote za elektronsko cestninjenje
(ISO/TS 14907-2:2011)
Electronic fee collection - Test procedures for user and fixed equipment - Part 2:
Conformance test for the onboard unit application interface (ISO/TS 14907-2:2011)
Elektronische Gebührenerhebung - Prüfprozeduren für Nutzer und feste Ausrüstungen -
Teil 2: Konformitätsprüfung der Anwendungsschnittstelle von fahrzeuginternen Einheiten
(ISO/TS 14907-2:2011)
Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux
équipements fixes - Partie 2: Essai de conformité de l'interface d'application de l'unité
embarquée (ISO/TS 14907-2:2011)
Ta slovenski standard je istoveten z: CEN ISO/TS 14907-2:2011
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN ISO/TS 14907-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2011
ICS 35.240.60; 43.040.15 Supersedes CEN ISO/TS 14907-2:2006
English Version
Electronic fee collection - Test procedures for user and fixed
equipment - Part 2: Conformance test for the onboard unit
application interface (ISO/TS 14907-2:2011)
Perception du télépéage - Modes opératoires relatifs aux Elektronische Gebührenerhebung - Prüfprozeduren für
équipements embarqués et aux équipements fixes - Partie Nutzer und feste Ausrüstungen - Teil 2:
2: Essai de conformité de l'interface d'application de l'unité Konformitätsprüfung der Anwendungsschnittstelle von
embarquée (ISO/TS 14907-2:2011) fahrzeuginternen Einheiten (ISO/TS 14907-2:2011)
This Technical Specification (CEN/TS) was approved by CEN on 31 October 2011 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14907-2:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (CEN ISO/TS 14907-2:2011) has been prepared by Technical Committee CEN/TC 278 “Road
transport and traffic telematics", the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 "Intelligent transport systems".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 14907-2:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
TECHNICAL ISO/TS
SPECIFICATION 14907-2
Second edition
2011-11-01
Electronic fee collection — Test
procedures for user and fixed
equipment —
Part 2:
Conformance test for the onboard unit
application interface
Perception du télépéage — Modes opératoires relatifs aux équipements
embarqués et aux équipements fixes —
Partie 2: Essai de conformité de l'interface d'application de l'unité
embarquée
Reference number
ISO/TS 14907-2:2011(E)
©
ISO 2011
ISO/TS 14907-2:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO/TS 14907-2:2011(E)
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 OBU and supporting information . 11
5.1 ICS . 12
5.2 IXIT . 12
6 Testing requirements . 12
6.1 Conceptual test architecture . 12
6.2 Conformance test system. 13
6.3 Test documentation . 14
Annex A (normative) Implementation conformance statement pro forma . 16
Annex B (normative) Implementation of extra information for testing . 29
Annex C (informative) OBU test cases . 33
Annex D (informative) OBE conformance test procedures conducted in Japan . 74
Bibliography . 79
ISO/TS 14907-2:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a
technical committee may decide to publish other types of document:
an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in
an ISO working group and is accepted for publication if it is approved by more than 50 % of the members
of the parent committee casting a vote;
an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical
committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting
a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a
further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is
confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an
International Standard or be withdrawn.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TS 14907-2 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
This second edition cancels and replaces the first edition (ISO/TS 14907-2:2006), which has been technically
revised.
ISO/TS 14907 consists of the following parts, under the general title Electronic fee collection — Test
procedures for user and fixed equipment:
Part 1: Description of test procedures
Part 2: Conformance test for the onboard unit application interface
iv © ISO 2011 – All rights reserved
ISO/TS 14907-2:2011(E)
Introduction
This part of ISO/TS 14907 describes tests that verify OBU conformance of implementations of functions and
data structures for EFC applications.
TECHNICAL SPECIFICATION ISO/TS 14907-2:2011(E)
Electronic fee collection — Test procedures for user and fixed
equipment —
Part 2:
Conformance test for the onboard unit application interface
1 Scope
This part of ISO/TS 14907 describes tests that verify on-board unit (OBU) conformance of implementations of
functions and data structures, as defined in the implementation conformance statement based on
ISO 14906:2011, for electronic fee collection (EFC) applications. After the tests of isolated data items and
functions (C.1-C.2), an example is given for testing of a complete EFC transaction (C.3).
The scope of this part of ISO/TS 14907 comprises definitions of OBU conformance assessment tests of
basic dedicated short-range communication (DSRC) L7 functionality,
EFC application functions,
EFC attributes (i.e. EFC application information),
the addressing procedures of EFC attributes and (hardware) components [e.g. integrated circuit cards
(ICC) and man-machine interfaces (MMI)],
the EFC transaction model, which defines the common elements and steps of any EFC transaction, and
the behaviour of the interface so as to support interoperability on an EFC-DSRC application interface
level, see Figure 1.
ISO/TS 14907-2:2011(E)
Figure 1 — The EFC application interface
The purpose of this part of ISO/TS 14907 is to define tests that
assess OBU capabilities,
assess OBU behaviour,
serve as a guide for OBU conformance evaluation and type approval,
achieve comparability between the results of the corresponding tests applied in different places at
different times, and
facilitate communications between parties.
Whereas this part of ISO/TS 14907 defines examples of test cases for DSRC and EFC functionality in
Annex C, it does not intend to specify a complete test suite for a certain implementation. To compose a test
suite for a specific EFC implementation, the test cases may have to be modified and new test cases may have
to be defined and added in order for the conformance test to be complete. It can be useful to take into account
the fol
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.