EN 15583-1:2009

Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements

This document is valid for snow ploughs designed to be fitted to winter maintenance vehicles, on their frontmounting
plates according to EN 15432 and also for side-mounted snow ploughs.
Demands on design and construction of front-mounted or side-mounted snow ploughs for winter service are
determined by this document. This document is meant to assess the demands made on snow ploughs
operated in traffic.
The document is valid for:
single-side snow ploughs;
variable V-ploughs.
The following points are not standardized by this document:
v-shaped snow ploughs;
requirements for registration and approval;
requirements made by carrier vehicle manufacturers;
requirements on safety these are dealt with in EN 13021.

Winterdienstausrüstung - Schneepflüge - Teil 1: Produktbeschreibung und Anforderungen

Dieses Dokument gilt für Schneepflüge, die nach EN 15432 mittels Anbauplatten an Winterdienstfahrzeugen
montiert werden sowie für seitlich montierte Schneepflüge.
Konstruktive Eigenschaften von im Winterdienst eingesetzten Front- oder Seitenpflügen werden hierin festgelegt
und beschrieben. Das Dokument soll die Anforderungen stipulieren, die Schneepflüge erfüllen müssen,
die im öffentlichen Verkehr zum Einsatz kommen.
Dieses Dokument gilt für:
- einseitig räumende Schneepflüge;
- variable V-Pflüge.
Folgende Punkte sind nicht Gegenstand dieses Dokuments:
- Keilpflüge;
- Anforderungen für die Anmeldung und Zulassung;
- Anforderungen der Fahrzeughersteller;
- Sicherheitstechnische Anforderungen — diese werden in EN 13021 behandelt.

Matériels de viabilité hivernale - Lames de déneigement - Partie 1 : Description du produit et exigences

Le présent document s'applique aux lames de déneigement conçues pour équiper les plaques de base avant, conformément à l’EN 15432. Le document s'applique aussi aux ailerons.
Il établit les exigences de conception et de construction des lames frontales et des ailerons utilisés lors du service de la viabilité hivernale.
Ce document s'applique aux :
-   lames biaises fixes ;
-   étraves transformables.
Le présent document ne réglemente pas les éléments suivants :
-   lames de déneigement en forme de V ;
-   exigences d'enregistrement et d'homologation ;
-   exigences des fabricants d'automobiles ;
-   exigences de sécurité, traitées dans l'EN 13021.

Oprema za zimska vzdrževalna dela - Snežni plugi - 1. del: Opis proizvoda in zahteve

General Information

• Status: Published
• Publication Date: 02-Jun-2009
• ICS: 43.160 - Special purpose vehicles
• Technical Committee: CEN/TC 337 - Winter maintenance and road service area maintenance equipment
• Drafting Committee: CEN/TC 337/WG 1 - Winter maintenance equipment
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Oct-2020
• Ref Project: SIST EN 15583-1:2009 - Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za zimska vzdrževalna dela - Snežni plugi - 1. del: Opis proizvoda in zahteveWinterdienstausrüstung - Schneepflüge - Teil 1: Produktbeschreibung und AnforderungenMatériels de viabilité hivernale - Lames de déneigement - Partie 1: Description du produit et exigencesWinter maintenance equipment - Snow ploughs - Part 1: Product description and requirements43.160Vozila za posebne nameneSpecial purpose vehiclesICS:Ta slovenski standard je istoveten z:EN 15583-1:2009SIST EN 15583-1:2009en01-september-2009SIST EN 15583-1:2009SLOVENSKI
STANDARD



SIST EN 15583-1:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15583-1June 2009ICS 43.160 English VersionWinter maintenance equipment - Snow ploughs - Part 1: Productdescription and requirementsMatériels de viabilité hivernale - Lames de déneigement -Partie 1: Description du produit et exigencesWinterdienstausrüstung - Schneepflüge - Teil 1:Produktbeschreibung und AnforderungenThis European Standard was approved by CEN on 6 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15583-1:2009: ESIST EN 15583-1:2009



EN 15583-1:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Requirements .5 4.1 General .5 4.2 Dimensions .5 4.3 Override protection for front-mounted snow ploughs .9 4.4 Override protection for front-mounted ice scrapers .9 4.5 Bump protection of side-mounted snow ploughs . 10 4.6 Side reverse of front-mounted snow ploughs . 10 4.7 Side reverse of front-mounted variable V-Ploughs . 10 4.8 Side reverse of front-mounted ice scrapers . 10 4.9 Raising and lowering of snow ploughs . 10 4.10 Plough support . 12 4.11 Drive by hydraulic equipment of carrier vehicle . 12 4.12 Repair and maintenance . 12 4.13 Outdoor storing .
...