EN 61076-1:2006

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Establishes uniform specifications and technical information for connectors. Is applicable to a family of connectors for use in electronic and electrical equipment; does not cover connectors designed for use at radio frequencies.

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 1: Fachgrundspezifikation

Connecteurs pour équipements électroniques - Exigences de produit - Partie 1: Spécification générique

Etablit des spécifications et des caractéristiques techniques uniformes pour les connecteurs. Est applicable à une famille de connecteurs destinés à être utilisés dans des équipements électriques et électroniques; ne couvre pas les connecteurs conçus pour être utilisés aux fréquences radioélectriques.

Konektorji za elektronsko opremo – Zahteve za izdelek – 1. del: Rodovna specifikacija (IEC 61076-1:2006)

Ta del standarda IEC 61076 določa enotne specifikacije in tehnične informacije za konektorje. Ta del standarda IEC 61076 se uporablja za družino konektorjev, ki se uporabljajo za elektronsko in električno opremo; konektorji, ki so zasnovani za uporabo na radijskih frekvencah, niso zajeti.

General Information

• Status: Published
• Publication Date: 08-Jun-2006
• Withdrawal Date: 30-Apr-2009
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Jun-2016
• Completion Date: 09-Jun-2006
• Ref Project: SIST EN 61076-1:2006 - Connectors for electronic equipment - Product requirements -- Part 1: Generic specification

Relations

• Replaces: EN 61076-1:1995 - Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval
• Effective Date: 29-Jan-2023
• Replaces: EN 61076-1:1995/A1:1996 - Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval
• Effective Date: 28-Jan-2023
• Replaces: EN 61076-1:1995/A2:2001 - Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 1: Generic specification - Capability approval
• Effective Date: 28-Jan-2023
• Amended By: EN 61076-1:2006/A1:2019 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
• Effective Date: 26-Jul-2016

Standards Content (Sample)

SLOVENSKI SIST EN 61076-1:2006

STANDARD
oct 2006
Konektorji za elektronsko opremo – Zahteve za izdelek – 1. del: Rodovna
specifikacija (IEC 61076-1:2006)
Connectors for electronic equipment – Product requirements – Part 1: Generic
specification (IEC 61076-1:2006)
ICS 31.220.10 Referenčna številka
SIST EN 61076-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61076-1

NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM

ICS 31.220.10 Supersedes EN 61076-1:1995 + A1:1996 + A2:2001


English version


Connectors for electronic equipment -
Product requirements
Part 1: Generic specification
(IEC 61076-1:2006)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit Produktanforderungen
Partie 1: Spécification générique Teil 1: Fachgrundspezifikation
(CEI 61076-1:2006) (IEC 61076-1:2006)




This European Standard was approved by CENELEC on 2006-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-1:2006 E

---------------------- Page: 2 ----------------------

EN 61076-1:2006 - 2 -

Foreword
The text of document 48B/1621/FDIS, future edition 2 of IEC 61076-1, prepared by SC 48B, Connectors,
of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-1 on
2006-05-01.
This European Standard supersedes EN 61076-1:1995 + A1:1996 + A2:2001.
This Standard is to be used in conjunction with EN 62197-1:2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61076-1:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-581 1978 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 581: Electromechanical components
for electronic equipment


1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
+ corr. October 1988 Part 1: General and guidance


IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements


IEC 60664-1 (mod) 1992 Insulation coordination for equipment within
+ A1 2000 low-voltage systems -
+ A2 2002 Part 1: Principles, requirements and tests
EN 60664-1 2003


IEC 62197-1 2006 Connectors for electronic equipment - Quality EN 62197-1 2006
assessment requirements -
Part 1: Generic specification


IEC/TR 62225 2001 Guidance on terms for connectors an
...