EN ISO 1101:2005

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)

ISO 1101:2004 contains basic information and gives requirements for the geometrical tolerancing of workpieces.

Geometrische Produktspezifikation (GPS) - Geometrische Tolerierung - Tolerierung von Form, Richtung, Ort und Lauf (ISO 1101:2004)

Diese Internationale Norm enthält die grundlegende Information für die geometrische Tolerierung von Werkstücken.
Sie ist die Ausgangsbasis und beschreibt die Grundlagen für die Form- und Lagetolerierung.
ANMERKUNG   Es gibt verschiedene Normen, auf die im Abschnitt 2 und in Tabelle 2 hingewiesen wird, die weitere detaillierte Informationen für die Form- und Lagetolerierung beinhalten.

Spécification géométrique des produits (GPS) - Tolérancement géométrique - Tolérancement de forme, orientation, position et battement (ISO 1101:2004)

L'ISO 1101:2004 fournit les informations de base et spécifie les exigences pour le tolérancement géométrique des pièces.

Specifikacija geometrijskih veličin izdelka – Toleriranje geometrijskih veličin – Tolerance oblike, orientacije, položaja in opleta (ISO 1101:2004)

General Information

• Status: Withdrawn
• Publication Date: 15-Nov-2005
• Withdrawal Date: 19-Feb-2013
• ICS: 01.100.20 - Mechanical engineering drawings
• ICS: 17.040.10 - Limits and fits
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Feb-2013
• Completion Date: 20-Feb-2013
• Ref Project: SIST EN ISO 1101:2006 - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)

Relations

• Replaced By: EN ISO 1101:2013 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013)
• Effective Date: 27-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1101:2006
01-marec-2006
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND±7ROHULUDQMHJHRPHWULMVNLKYHOLþLQ±
7ROHUDQFHREOLNHRULHQWDFLMHSRORåDMDLQRSOHWD,62
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of
form, orientation, location and run-out (ISO 1101:2004)
Geometrische Produktspezifikation (GPS) - Geometrische Tolerierung - Tolerierung von
Form, Richtung, Ort und Lauf (ISO 1101:2004)
Spécification géométrique des produits (GPS) - Tolérancement géométrique -
Tolérancement de forme, orientation, position et battement (ISO 1101:2004)
Ta slovenski standard je istoveten z: EN ISO 1101:2005
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
17.040.10 Tolerance in ujemi Limits and fits
SIST EN ISO 1101:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1101:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 1101:2006
EUROPEAN STANDARD
EN ISO 1101
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 01.100.20; 17.040.10

English Version
Geometrical Product Specifications (GPS) - Geometrical
tolerancing - Tolerances of form, orientation, location and run-
out (ISO 1101:2004)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) - Geometrische
Tolérancement géométrique - Tolérancement de forme, Tolerierung - Tolerierung von Form, Richtung, Ort und Lauf
orientation, position et battement (ISO 1101:2004) (ISO 1101:2004)
This European Standard was approved by CEN on 3 November 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1101:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1101:2006
EN ISO 1101:2005 (E)






Foreword



The text of ISO 1101:2004 has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification” of the International
Organization for Standardization (ISO) and has been taken over as EN ISO 1101:2005 by
Technical Committee CEN/TC 290 "Dimensional and geometrical product specification and
verification", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2006, and conflicting national standards
shall be withdrawn at the latest by May 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 1101:2004 has been approved by CEN as EN ISO 1101:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1101:2006
INTERNATIONAL ISO
STANDARD 1101
Second edition
2004-12-15
Geometrical Product Specifications
(GPS) — Geometrical tolerancing —
Tolerances of form, orientation, location
and run-out
Spécification géométrique des produits (GPS) — Tolérancement
géométrique — Tolérancement de forme, orientation, position et battement

Reference number
ISO 1101:2004(E)
© ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 1101:2006
ISO 1101:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file
...