EN 61076-3-106:2006

Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Covers protective housings for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in the IEC 60603-7 series to IP65 and IP67 ratings according to IEC 60529, for use in industrial environments. The housings cover a variety of different locking mechanisms and a variety of different mounting configurations and termination types which are detailed in the IEC 60603-7 series.

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 3-106: Rechteckige Steckverbinder - Bauartspezifikation für Schutzgehäuse für die Anwendung mit 8-poligen geschirmten und ungeschirmten Steckverbindern für industrielle Umgebungen zur Aufnahme der Schnittstelle der Reihe IEC 60603-7

Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-106: Connecteurs rectangulaires - Spécification particulière pour boîtiers de protection utilisés avec des connecteurs blindés et non blindés 8 voies pour des environnements industriels incorporant l’interface série CEI 60603-7

Couvre les boîtiers de protection pour améliorer les connecteurs 8 voies blindés et non blindés existants utilisant l'interface décrite dans la série CEI 60603-7 pour les caractéristiques IP65 et IP67 conformément à la CEI 60529, utilisée dans les environnements industriels. Les boîtiers couvrent une variété de différents mécanismes de verrouillage conformément à la présente partie de la CEI 61076 et une variété de différentes configurations de montage et types de sortie qui sont détaillés dans la série CEI 60603-7.

Konektorji za elektronsko opremo - Zahteve za izdelke - 3-106. del: Pravokotni konektorji - Podrobna specifikacija za zaščitna ohišja za uporabo pri 8-rednih zaslonjenih in nezaslonjenih konektorjih za industrijska okolja z vgrajenimi zaporednimi vmesniki po IEC 60603-7 (IEC 61076-3-106:2006)

General Information

• Status: Published
• Publication Date: 14-Dec-2006
• Withdrawal Date: 31-Oct-2009
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Dec-2006
• Completion Date: 15-Dec-2006
• Ref Project: SIST EN 61076-3-106:2008 - Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Relations

• Replaced By: EN IEC 61076-3-106:2023 - Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
• Effective Date: 12-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2008
.RQHNWRUML]DHOHNWURQVNRRSUHPR=DKWHYH]DL]GHONHGHO3UDYRNRWQL
NRQHNWRUML3RGUREQDVSHFLILNDFLMD]D]DãþLWQDRKLãMD]DXSRUDERSULUHGQLK
]DVORQMHQLKLQQH]DVORQMHQLKNRQHNWRUMLK]DLQGXVWULMVNDRNROMD]YJUDMHQLPL
]DSRUHGQLPLYPHVQLNLSR,(&,(&
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular
connectors - Detail specification for protective housings for use with 8-way shielded and
unshielded connectors for industrial environments incorporating the IEC 60603-7 series
interface (IEC 61076-3-106:2006)
Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 3-106:
Rechteckige Steckverbinder - Bauartspezifikation für Schutzgehäuse für die Anwendung
mit 8-poligen geschirmten und ungeschirmten Steckverbindern für industrielle
Umgebungen zur Aufnahme der Schnittstelle der Reihe IEC 60603-7 (IEC 61076-3-
106:2006)
Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-106:
Connecteurs rectangulaires - Spécification particuliere pour boîtiers de protection utilisés
avec des connecteurs blindés et non blindés 8 voies pour des environnements
industriels incorporant l’interface série CEI 60603-7 (IEC 61076-3-106:2006)
Ta slovenski standard je istoveten z: EN 61076-3-106:2006
ICS:
31.220.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-3-106
NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Product requirements
Part 3-106: Rectangular connectors -
Detail specification for protective housings
for use with 8-way shielded and unshielded connectors
for industrial environments incorporating
the IEC 60603-7 series interface
(IEC 61076-3-106:2006)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit Produktanforderungen
Partie 3-106: Connecteurs Teil 3-106: Rechteckige Steckverbinder -
rectangulaires - Bauartspezifikation für Schutzgehäuse
Spécification particulière pour boîtiers de für die Anwendung mit 8-poligen
protection utilisés avec des connecteurs geschirmten und ungeschirmten
blindés et non blindés 8 voies pour des Steckverbindern für industrielle
environnements industriels incorporant Umgebungen zur Aufnahme der
l’interface série CEI 60603-7 Schnittstelle der Reihe IEC 60603-7
(CEI 61076-3-106:2006) (IEC 61076-3-106:2006)

This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-3-106:2006 E

Foreword
The text of document 48B/1692A/FDIS, future edition 1 of IEC 61076-3-106, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-3-106 on 2006-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-08-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-11-01
with the EN have to be withdrawn
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this standard may involve the use of patent(s) concerning the free
connectors in 3.5, 3.6.2, 3.10.2, 3.11, 3.11.2, 3.12.2, 3.13.2 and 3.14.2.
The IEC and CENELEC take no position concerning the evidence, validity and scope of these patent
rights.
The holder of this patent right (Subclause 3.5) has assured the IEC that he/she is willing to give free
licences with applicants throughout the world. In this respect, the statement of the holder of this patent
right is registered with the IEC.
Information may be obtained from:
The Siemon Company
27 Siemon Company Drive
Watertown, CT 06795-0400
USA
The holder of this patent right (3.6.2, 3.10.2, 3.11.2, 3.12.2, 3.13.2, 3.14.2) has assured the IEC that
he/she is willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with
applicants throughout the world. In this respect, the statement of the holder of this patent right is
registered with IEC.
The Siemon Company
27 Siemon Company Drive
Watertown, CT 06795-0400
USA
The holder of this patent right (3.11) has assured the IEC that he/she is willing to negotiate licenses under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with IEC.
Information may be obtained for the variant in 3.11 from:
Harting Electric GmbH & Co KG
Postfach 1473
32328 Espelkamp
Germany
Attention is drawn to the possibility that some of the elements of this standard may be the subject of
patent rights other than those identified above. IEC shall not be held responsible for identifying any or all
such patent rights.
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61076-3-106:2006
Endorsement notice
The text of the International Standard IEC 61076-3-106:2006 was approved by CENELEC as a European
Standard without any modification.
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-581 1978 International Electrotechnical Vocabulary - -
(IEV)
Chapter 581: Electromechanical components
for electronic equipment
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-14 - Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of temperature

1) 2)
IEC 60068-2-30 - Environmental testing EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
1) 2)
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 2006
and measurements
Part 1-100: General - Applicable publications

1) 2)
IEC 60529 - Degrees of protection provided by enclosures EN 60529 1991
(IP Code) + corr. May 1993
IEC 60603-7 Series Connectors for electronic equipment EN 60603-7 Series

1) 2)
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 2003
low-voltage systems
Part 1: Principles, requirements and tests

1) 2)
IEC 61076-1 - Connectors for electronic equipment - EN 61076-1 2006
Product requirements
Part 1: Generic specification
1)
IEC 61156-2 - Multicore and symmetrical pair/quad cables - -
for digital communications
Part 2: Horizontal floor wiring - Sectional
specification
1)
IEC 61156-3 - Multicore and symmetrical pair/quad cables - -
for digital communications
Part 3: Work area wiring - Sectional
specification
1)
Undated reference.
2)
Valid edition at date of issue.

- 5 - EN 61076-3-106:2006
Publication Year Title EN/HD Year
1)
IEC 61156-4 - Multicore and symmetrical pair/quad cables - -
for digital communications
Part 4: Riser cables - Sectional specification

NORME CEI
INTERNATIONALE
IEC
61076-3-106
INTERNATIONAL
Première édition
STANDARD
First edition
2006-09
Connecteurs pour équipements électroniques –
Exigences de produit –
Partie 3-106:
Connecteurs rectangulaires – Spécification
particulière pour boîtiers de protection utilisés
avec des connecteurs blindés et non blindés 8
voies pour des environnements industriels
incorporant l’interface série CEI 60603-7

Connectors for electronic equipment –
Product requirements –
Part 3-106:
Rectangular connectors – Detail specification for
protective housings for use with 8-way shielded
and unshielded connectors for industrial
environments incorporating the IEC 60603-7
series interface
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
X
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-3-106  IEC:2006 – 3 –
CONTENTS
FOREWORD.9

1 General data .13
1.1 Scope.13
1.2 Normative references .13
1.3 IEC type designation .17
2 Terminology .17
3 Dimensional information .19
3.1 Common features .19
3.2 General .19
3.3 Contact arrangement of all connector types.19
3.4 IP65 and IP67 sealing .19
3.5 Industrial IEC 60603-7 variant 01 – bayonet coupling .19
3.6 Industrial IEC 60603-7 variant 02 – snap-in coupling .25
3.7 Industrial IEC 60603-7 variant 03 – threaded coupling.33
3.8 Industrial IEC 60603-7 variant 04 – snap-in coupling .37
3.9 Industrial IEC 60603-7 variant 05 – locking lever coupling.41
3.10 Industrial IEC 60603-7 variant 06 – snap-in coupling .45
3.11 Industrial IEC 60603-7 variant 07 – locking lever coupling.49
3.12 Industrial IEC 60603-7 variant 08 – threaded coupling.53
3.13 Industrial IEC 60603-7 variant 09 – quarter turn coupling .57
3.14 Industrial IEC 60603-7, variant 10 – Pulse lock coupling .61
3.15 Termination and mounting information.63
3.16 Mounting information for variant 01, fixed connector.65
3.17 Mounting information for variant 02, fixed connector.67
3.18 Mounting information for variant 03, fixed connector.69
3.19 Mounting information for variant 04, fixed connector.69
3.20 Mounting information for variant 05, fixed connector.71
3.21 Mounting information for variant 06, fixed connector.73
3.22 Mounting information for variant 07, fixed connector.75
3.23 Mounting information for variant 08, fixed connector.77
3.24 Mounting information for variant 09, fixed connector.77
3.25 Mounting information for variant 10, fixed connector.
...