EN 60700-1:2015/A1:2021

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

No scope available

Thyristorventile für Hochspannungsgleichstrom-Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung

Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 1: Essais électriques

Tiristorski ventili (elektronke) za visokonapetostni enosmerni prenos (HVDC) električne energije - 1. del: Električno preskušanje - Dopolnilo A1 (IEC 60700-1:2015/AMD1:2021)

General Information

• Status: Published
• Publication Date: 21-Oct-2021
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22F - IEC_SC_22F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Oct-2021
• Completion Date: 22-Oct-2021
• Ref Project: SIST EN 60700-1:2015/A1:2022 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/AMD1:2021)

Relations

• Amends: EN 60700-1:2015 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
• Effective Date: 26-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2022
Tiristorski ventili (elektronke) za visokonapetostni enosmerni prenos (HVDC)
električne energije - 1. del: Električno preskušanje - Dopolnilo A1 (IEC 60700-
1:2015/AMD1:2021)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1:
Electrical testing (IEC 60700-1:2015/AMD1:2021)
Thyristorventile für Hochspannungsgleichstrom-Energieübertragung (HGÜ) - Teil 1:
Elektrische Prüfung (IEC 60700-1:2015/AMD1:2021)
Valves à thyristors pour le transport d'énergie en courant continu à haute tension
(CCHT) - Partie 1: Essais électriques (IEC 60700-1:2015/AMD1:2021)
Ta slovenski standard je istoveten z: EN 60700-1:2015/A1:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
31.080.20 Tiristorji Thyristors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60700-1:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 29.200
English Version
Thyristor valves for high voltage direct current (HVDC) power
transmission - Part 1: Electrical testing
(IEC 60700-1:2015/AMD1:2021)
Valves à thyristors pour le transport d'énergie en courant Thyristorventile für Hochspannungsgleichstrom-
continu à haute tension (CCHT) - Partie 1: Essais Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung
électriques (IEC 60700-1:2015/AMD1:2021)
(IEC 60700-1:2015/AMD1:2021)
This amendment A1 modifies the European Standard EN 60700-1:2015; it was approved by CENELEC on 2021-10-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60700-1:2015/A1:2021 E

European foreword
The text of document 22F/604/CDV, future IEC 60700-1/AMD1, prepared by SC 22F “Power
electronics for electrical transmission and distribution systems” of IEC/TC 22 “Power electronic
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60700-1:2015/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–07–20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–10–20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60700-1:2015/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
The Annex ZA of EN 60700-1:2015 applies with the following changes:
Publication Year Title EN/HD Year
Replace the following references:
IEC 61803 1999 Determination of power losses in high- EN 61803 1999
voltage direct current (HVDC)converter
stations with line-commutated converters
+A1 2010  +A1 2010
With the following new reference:
IEC 61803 2020 Determination of power losses in high- EN IEC 61803 2020
voltage direct current (HVDC) converter
stations with line-commutated converters

Replace the following reference, as well as the associated footnote:
ISO/IEC Guide 25  General requirements for the technical
competence of testing laboratories

With the following new reference:
ISO/IEC 17025 - General requirements for the competence EN ISO/IEC 17025 -
of testing and calibration laboratories

IEC 60700-1 ®
Edition 2.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Thyristor valves for high voltage direct current (HVDC) power transmission –

Part 1: Electrical testing
Valves à thyristors pour le transport d'énergie en courant continu à haute

tension (CCHT) –
Partie 1: Essais électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200 ISBN 978-2-8322-1012-9

‒ 2 ‒ IEC 60700-1:2015/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT
CURRENT (HVDC) POWER TRANSMISSION –

Part 1: Electrical testing
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publicati
...