EN 61029-2-9:2012

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

Applies to transportable mitre saws intended for cutting non ferrous metals such as aluminium, wood and similar materials with a blade diameter not exceeding 400 mm. Tools comibining the function of mitre saw with the function of circular saw are not covered by this standard.

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere Anforderungen für Gehrungskappsägen

Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières pour les scies à onglet

S'applique aux scies à onglet semi-fixes, destinées à couper des métaux non ferreux tels que l'aluminium, le bois et des matériaux analogues, et ayant un diamètre de lame maximal de 400 mm. Les machines-outils combinant les fonctions de scie à onglet et de scie circulaire ne sont pas comprises dans le domaine d'application de cette norme.

Varnost premičnih električnih orodij - 2-9. del: Posebne zahteve za zajeralne žage

Ta evropski standard se uporablja za premične zajeralne žage, katerih premer rezila je manjši od 350 mm in so namenjene rezanju lesa in podobnih materialov, plastike ter barvnih kovin, razen magnezija.

General Information

• Status: Withdrawn
• Publication Date: 11-Oct-2012
• Withdrawal Date: 02-Sep-2015
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Nov-2019
• Completion Date: 15-Nov-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: SIST EN 61029-2-9:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

Relations

• Replaces: EN 61029-2-9:2009 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 29-Jan-2023
• Replaced By: EN 62841-3-9:2015 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 28-Jan-2023
• Amended By: EN 61029-2-9:2012/A11:2013 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61029-2-9:2013
01-marec-2013
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]D]DMHUDOQHåDJH
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements
for mitre saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-9: Besondere
Anforderungen für Gehrungskappsägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-9: Règles particulières
pour les scies à onglet
Ta slovenski standard je istoveten z: EN 61029-2-9:2012
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 61029-2-9:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61029-2-9:2013

---------------------- Page: 2 ----------------------

SIST EN 61029-2-9:2013

EUROPEAN STANDARD
EN 61029-2-9

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-9:2009


English version


Safety of transportable motor-operated electric tools -
Part 2-9: Particular requirements for mitre saws
(IEC 61029-2-9:1995, modified)


Sécurité des machines-outils électriques Sicherheit transportabler motorbetriebener
semi-fixes - Elektrowerkzeuge -
Partie 2-9: Règles particulières pour les Teil 2-9: Besondere Anforderungen für
scies à onglet Gehrungskappsägen
(CEI 61029-2-9:1995, modifiée) (IEC 61029-2-9:1995, modifiziert)





This European Standard was approved by CENELEC on 2012-09-03. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-9:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61029-2-9:2013
EN 61029-2-9:2012 – 2 –
Contents
Foreword . 4
1 Scope . 6
2 Definitions . 6
3 General requirements . 6
4 General notes on tests . 7
5 Rating . 7
6 Classification . 7
7 Marking and information for use . 7
8 Protection against electric shock . 8
9 Starting . 8
10 Input and current . 8
11 Heating . 8
12 Leakage current . 9
13
...