EN 61935-2:2003

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords

Provides methods to ensure compatibility of modular plug cords to be used in cabling according to EN 50173 and also provides test methods and associated requirements to demonstrate the performance and reliability of these cords during their operational lifetime.

Anwendungsneutrale Kommunikationskabelanlagen - Spezifikation für die Prüfung der symmetrischen Kommunikationsverkabelung nach EN 50173 - Teil 2: Rangierschnüre und Geräteanschlussschnüre

Systèmes de câblage générique - Spécification pour les essais de câblage de télécommunications équilibrées selon la EN 50173 - Partie 2: Cordons de brassage et cordons de zone de travail

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords (IEC 61935-2:2003)

General Information

• Status: Withdrawn
• Publication Date: 29-Sep-2003
• Withdrawal Date: 30-Jun-2006
• ICS: 33.040.20 - Transmission systems
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XA - Coaxial cables
• Parallel Committee: IEC/SC 46A - IEC_SC_46A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2008
• Completion Date: 01-Oct-2008
• Ref Project: SIST EN 61935-2:2004 - Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 -- Part 2: Patch cords and work area cords

Relations

• Replaced By: EN 61935-2:2005 - Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2: Patch cords and work area cords
• Effective Date: 29-Jan-2023

Standards Content (Sample)

EUROPEAN STANDARD EN 61935-2
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2003

ICS 33.040.20; 33.120.20 Incorporates Corrigendum September 2003

English version
Generic cabling systems –
Specification for the testing of balanced communication cabling
in accordance with EN 50173
Part 2: Patch cords and work area cords
(IEC 61935-2:2003)
Systèmes de câblage générique – Anwendungsneutrale
Spécification pour les essais de câblage Kommunikationskabelanlagen –
de télécommunications équilibrées Spezifikation für die Prüfung der
selon l'EN 50173 symmetrischen Kommunikations-
Partie 2: Cordons de brassage et verkabelung nach EN 50173
cordons de zone de travail Teil 2: Rangierschnüre und
(CEI 61935-2:2003) Geräteanschlussschnüre
(IEC 61935-2:2003)
This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61935-2:2003 E
Foreword
The text of document 46A/532/FDIS, future edition 1 of IEC 61935-2, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61935-2 on 2003-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61935-2:2003 was approved by CENELEC as a European
Standard without any modification.
__________
...