EN 60603-7-4:2005

Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Covers 8-way unshielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 250 MHz. These connectors are typically used as category 6 connectors in class E cabling systems specified in ISO/IEC 11801:2002. These connectors are intermateable, interoperable, and backward compatible with other EN 60603-7 series connectors.

Steckverbinder für elektronische Einrichtungen - Teil 7-4: Bauartspezifikation für ungeschirmte freie und feste Steckverbinder, 8polig, für Datenübertragungen bis 250 MHz

Connecteurs pour équipements électroniques - Partie 7-4: Spécification particulière pour les fiches et les embases non blindées à 8 voies pour la transmission de données à des fréquences jusqu'à 250 MHz

Couvre les fiches et les embases non blindées à 8 voies, et spécifie les exigences mécaniques et environnementales, ainsi que les exigences de transmission électrique pour des fréquences jusqu'à 250 MHz. Ces connecteurs sont normalement utilisés comme connecteurs de catégorie 6 dans les systèmes de câblage de la classe E spécifiés dans l'ISO/CEI 11801:2002. Ces connecteurs sont accouplables, interopérables et offrent une compatibilité amont avec les autres connecteurs de la série EN 60603-7.

Konektorji za elektronsko opremo – 7-4. del: Podrobna specifikacija za 8-redne, nezaslonjene, proste in pritrjene konektorje za prenos podatkov s frekvencami do 250 MHz (IEC 60603-7-4:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Mar-2005
• Withdrawal Date: 29-Feb-2008
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jul-2013
• Completion Date: 01-Jul-2013
• Ref Project: SIST EN 60603-7-4:2005 - Connectors for electronic equipment -- Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Relations

• Replaced By: EN 60603-7-4:2010 - Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60603-7-4:2005

STANDARD
december 2005
Konektorji za elektronsko opremo – 7-4. del: Podrobna specifikacija za 8-
redne, nezaslonjene, proste in pritrjene konektorje za prenos podatkov s
frekvencami do 250 MHz (IEC 60603-7-4:2005)
Connectors for electronic equipment – Part 7-4: Detail specification for 8-way,
unshielded, free and fixed connectors, for data transmissions with frequencies up
to 250 MHz (IEC 60603-7-4:2005)
ICS 31.220.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60603-7-4
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2005
ICS 31.220.10
English version
Connectors for electronic equipment
Part 7-4: Detail specification for 8-way, unshielded, free and fixed
connectors, for data transmissions with frequencies up to 250 MHz
(IEC 60603-7-4:2005)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques Einrichtungen
Partie 7-4: Spécification particulière Teil 7-4: Bauartspezifikation für
pour les fiches et les embases non ungeschirmte freie und feste
blindées à 8 voies pour la transmission Steckverbinder, 8polig, für
de données à des fréquences Datenübertragungen bis 250 MHz
jusqu'à 250 MHz (IEC 60603-7-4:2005)
(CEI 60603-7-4:2005)
This European Standard was approved by CENELEC on 2005-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60603-7-4:2005 E
Foreword
The text of document 48B/1504/FDIS, future edition 1 of IEC 60603-7-4, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7-4 on 2005-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7-4:2005 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60603-7-4:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
- - Communication cables - Specifications EN 50289-1-14 2004
for test methods
Part 1-14: Electrical test methods -
Coupling attenuation or screening
attenuation of connecting hardware

1)
IEC 60050-581 - International Electrotechnical Vocabulary - -
(IEV)
Chapter 581: Electromechanical
components for electronic equipment

1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-14 - Part 2: Tests - Test N: Change of EN 60068-2-14 1999
temperature
1) 2)
IEC 60068-2-38 - Part 2: Tests - Test Z/AD: Composite EN 60068-2-38 1999
temperature/humidity cyclic test

1)
IEC 60169-16 - Radio-frequency connectors - -
Part 16: R.F. coaxial connectors with
inner diameter of outer conductor 7 mm
(0,276 in) with screw coupling -
Characteristic impedance 50 ohms
(75 ohms) (Type N)
IEC 60352 Series Solderless connections EN 60352 Series

1) 2)
IEC 60352-2 - Part 2: Solderless crimped connections - EN 60352-2 1994
General requirements, test methods and
practical guidance
1) 2)
IEC 60352-3 - Part 3: Solderless accessible insulation EN 60352-3 1994
displacement connections - General
requirements, test methods and practical
guidance
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
1) 2)
IEC 60352-4 - Part 4: Solderless non-accessible EN 60352-4 1994
insulation displacement connections -
General requirements, test methods and
practical guidance
1) 2)
IEC 60352-5 - Part 5: Press-in connections - General EN 60352-5 2001
requirements, test methods and practical
guidance
1) 2)
IEC 60352-6 - Part 6: Insulation piercing connections - EN 60352-6 1997
General requirements, test methods and
practical guidance
1) 2)
IEC 60352-7 - Part 7: Spring clamp connections - EN 60352-7 2002
General requirements, test methods and
practical guidance
IEC 60512 Series Connectors for electronic equipment - EN 60512 Series
Tests and measurements
1) 2)
IEC 60512-1-100 - Connectors for electronic equipment - EN 60512-1-100 2001
Tests and measurements
Part 1-100: General - Applicable
publications
IEC 60603-7 Series Connectors for electronic equipment EN 60603-7 Series

3)
IEC 60603-7-2 - Part 7-2: Detail specification for 8-way, - -
unshielded, free and fixed connectors, for
data transmission with frequencies up to
100 MHz
1) 2)
IEC 60664-1 - Insulation coordination for equipment EN 60664-1 2003
within low-voltage systems
Part 1: Principles, requirements and tests

IEC 61076-1 1995 Connectors with assessed quality, for use EN 61076-1 1995
in d.c., low frequency analogue and in
digital high-speed data applications
Part 1: Generic specification - Capability
approval
4)
IEC 61156 Series Multicore and symmetrical pair/quad - -
cables for digital communications

1)
IEC 61156-1 - Multicore and symmetrical pair/quad - -
cables for digital communications
Part 1: Generic specification
1)
IEC 61156-2 - Part 2: Horizontal floor wiring - Sectional - -
specification
3)
At draft stage.
4)
See EN 50288 series, Multi-element metallic cables used in analogue and digital communication and control.

- 5 - EN 60603-7-4:2005
Publication Year Title EN/HD Year
1)
IEC 61156-3 - Part 3: Work area wiring - Sectional - -
specification
1)
IEC 61156-4 - Part 4: Riser cables - Sectional - -
specification
1)
IEC 61156-5 - Part 5: Symmetrical pair/quad cables with - -
transmission characteristics up to
600 MHz - Horizontal floor wiring -
Sectional specification
ISO/IEC 11801 2002 Information technology - Generic cabling - -
for customer premises
ISO 1302 2002 Geometrical Product Specifications (GPS) EN ISO 1302 2002
- Indication of surface texture in technical
product documentation
ITU-T 1996 Transmission aspects of unbalance about - -
Recommendation earth
G.117
ITU-T 2000 Resistibility of telecommunication - -
Recommendation equipment installed in a
K.20 telecommunications centre to
overvoltages and overcurrents
ITU-T 2000 Resistibility tests for telecommunication - -
Recommendation equipment exposed to overvoltages and
K.44 overcurrents - Basic Recommendation

ITU-T 1999 Measuring arrangements to assess the - -
Recommendation degree of unbalance about earth
O.9
NORME CEI
INTERNATIONALE IEC
60603-7-4
INTERNATIONAL
Première édition
STANDARD
First edition
2005-02
Connecteurs pour équipements électroniques –
Partie 7-4:
Spécification particulière pour les fiches
et les embases non blindées à 8 voies
pour la transmission de données
à des fréquences jusqu'à 250 MHz

Connectors for electronic equipment –
Part 7-4:
Detail specification for 8-way, unshielded,
free and fixed connectors, for data transmissions
with frequencies up to 250 MHz

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale PRICE CODE XD
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60603-7-4  CEI:2005
SOMMAIRE
AVANT-PROPOS.12
INTRODUCTION.16

1 Généralités.18
1.1 Domaine d’application .18
1.2 Références normatives .18
2 Désignation de type CEI .24
2.1 Termes et définitions .26
3 Caractéristiques communes et vue isométrique .28
3.1 Vue isométrique .28
3.2 Informations relatives à l’accouplement.28
4 Sorties de câble et connexions internes – Embases et fiches.44
4.1 Généralités.44
4.2 Types de sorties .44
5 Calibres .46
5.1 Embases .46
5.2 Fiches .52
6 Caractéristiques .56
6.1 Généralités.56
6.2 Affectation de groupement des broches et des paires.56
6.3 Classification en catégories climatiques .56
6.4 Caractéristiques électriques.58
6.5 Caractéristiques de transmission .62
6.6 Caractéristiques mécaniques .66
7 Essais et programmes d’essai.66
7.1 Généralités.66
7.2 Disposition pour l’essai de la résistance de contact .68
7.3 Disposition pour l’essai de vibrations (phase d’essai CP1).70
7.4 Procédures d’essai et méthodes de mesure .70
7.5 Préconditionnement.70
7.6 Câblage et montage des spécimens.72
7.7 Programmes d’essais .72

Annexe A (normative) Procédure de continuité de calibrage.90
A.1 Objet .90
A.2 Préparation des spécimens.90
A.3 Méthode d’essai .90
A.4 Mesures finales .90
A.5 Description
...