iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60349-1:2000

(Main)

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors

Enables the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for a comparison with other machines. Applies to traction motors, engine driven main generators, main motor-generator sets, auxiliary motors, auxiliary generators, auxiliary motor-generator sets and auxiliary rotary convertors.

Elektrische Zugförderung - Drehende elektrische Maschinen für Bahn- und Straßenfahrzeuge - Teil 1: Elektrische Maschinen ausgenommen umrichtergespeiste Wechselstrommotoren

Traction électrique - Machines électriques tournantes des véhicules ferroviaires et routiers - Partie 1: Machines autres que les moteurs à courant alternatif alimentés par convertisseur électronique

Permet de confirmer par des essais, les qualités de fonctionnement d'une machine et de procurer une base d'estimation de son aptitude à fournir un service spécifié et une base de comparaison avec d'autres machines. S'applique aux moteurs de traction, génératrices principales entraînées par un moteur thermique, groupes moteurs-générateurs principaux, moteurs auxiliaires, génératrices auxiliaires, groupes moteurs-générateurs auxiliaires et convertisseurs tournants auxiliaires.

Električna vleka – Rotacijski električni stroji za železniška in cestna vozila – 1. del: Stroji, razen elektronsko napajanih izmeničnih motorjev (IEC 60349-1:1999)

General Information

Status
Withdrawn
Publication Date
17-Feb-2000
Withdrawal Date
31-Dec-2002
ICS
29.280 - Electric traction equipment
Technical Committee
CLC/TC 9X - Electrical and electronic applications for railways
Drafting Committee
CLC/SC 9XB - Electromechanical material on board rolling stock
Parallel Committee
IEC/TC 9 - IEC_TC_9
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Nov-2013
Completion Date
01-Nov-2013
Ref Project
SIST EN 60349-1:2001 - Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors

Relations

Replaced By
EN 60349-1:2010 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
Effective Date
29-Jan-2023
Amended By
EN 60349-1:2000/A1:2002 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors
Effective Date
28-Jan-2023

Buy Standard

EN 60349-1:2001EN 60349-1:2001
PreviousNext
Standard
EN 60349-1:2001
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60349-1:2001
01-februar-2001
1DGRPHãþD
SIST ENV 60349-2:1998
(OHNWULþQDYOHND±5RWDFLMVNLHOHNWULþQLVWURML]DåHOH]QLãNDLQFHVWQDYR]LOD±GHO
6WURMLUD]HQHOHNWURQVNRQDSDMDQLKL]PHQLþQLKPRWRUMHY ,(&
Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1:
Machines other than electronic convertor-fed alternating current motors
Elektrische Zugförderung - Drehende elektrische Maschinen für Bahn- und
Straßenfahrzeuge -- Teil 1: Elektrische Maschinen ausgenommen umrichtergespeiste
Wechselstrommotoren
Traction électrique - Machines électriques tournantes des véhicules ferroviaires et
routiers -- Partie 1: Machines autres que les moteurs à courant alternatif alimentés par
convertisseur électronique
Ta slovenski standard je istoveten z: EN 60349-1:2000
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 60349-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 2 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 3 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 4 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 5 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 6 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 7 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 8 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 9 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 10 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 11 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 12 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 13 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 14 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 15 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 16 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 17 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 18 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 19 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 20 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 21 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 22 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 23 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 24 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 25 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 26 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 27 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 28 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 29 ----------------------

SIST EN 60349-1:2001

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50367:2020/A1:2022(Amendment)
Railway applications - Fixed installations and rolling stock - Criteria to achieve technical compatibility between pantographs and overhead contact line
SIST EN 50367:2020/A1:2022

This document specifies requirements for the technical compatibility between pantographs and overhead contact lines, to achieve free access to the lines of the European railway network. NOTE These requirements are defined for a limited number of pantograph types conforming to the requirements in 5.3, together with the geometry and characteristics of compatible overhead contact lines.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
SIST EN 50122-1:2022

This document specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with AC and/or DC traction systems and to any installations that can be endangered by the electric traction power supply system. This also includes requirements applicable to vehicles on electrified lines. It also applies to all aspects of fixed installations which are necessary to ensure electrical safety during maintenance work within electric traction power supply systems. This document applies to new electric traction power supply systems and major revisions to electric traction power supply systems for: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, 5) electric traction power supply systems for road vehicles, which use an overhead contact line system, and 6) magnetically levitated systems, which use a contact line system; c) material transportation systems. This document does not apply to: a) electric traction power supply systems in underground mines, b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the electric traction power supply system, c) suspended cable cars, d) funicular railways, e) existing vehicles. This document does not specify working rules for maintenance. The requirements within this document related to protection against electric shock are applicable to persons only.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-3:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
SIST EN 50122-3:2022

This document specifies requirements for the protective provisions relating to electrical safety in fixed installations, when it is reasonably likely that hazardous voltages or currents will arise for people or equipment, as a result of the mutual interaction of AC and DC electric power supply traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric power supply traction systems. The mutual interaction can be of any of the following kinds: — parallel running of AC and DC electric traction power supply systems; — crossing of AC and DC electric traction power supply systems; — shared use of tracks, buildings or other structures; — system separation sections between AC and DC electric traction power supply systems. The scope is limited to galvanic, inductive and capacitive coupling of the fundamental frequency voltages and currents and their superposition. This document applies to all new lines, extensions and to all major revisions to existing lines for the following electric traction power supply systems: a) railways; b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) magnetically levitated systems, which use a contact line system, 5) trolleybus systems, and 6) electric traction power supply systems for road vehicles, which use an overhead contact line system; c) material transportation systems. The document does not apply to: a) electric traction power supply systems in underground mines; b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the electric traction power supply system for railways; c) suspended cable cars; d) funicular railways; e) procedures or rules for maintenance. The rules given in this document can also be applied to mutual interaction with non-electrified tracks, if hazardous voltages or currents can arise from AC or DC electric traction power supply systems.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-2:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by DC traction systems
SIST EN 50122-2:2022

This document specifies requirements for protective provisions against the effects of stray currents, which result from the operation of DC electric traction power supply systems. As several decades' experience has not shown evident corrosion effects from AC electric traction power supply systems, this document only deals with stray currents flowing from a DC electric traction power supply system. This document applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system. This document applies to all new DC lines and to all major revisions to existing DC lines. The principles can also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. This document does not specify working rules for maintenance but provides design requirements to allow maintenance. The range of application includes: a) railways, b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) magnetically levitated systems, which use a contact line system, and 5) trolleybus systems, c) material transportation systems. This document does not apply to a) electric traction power supply systems in underground mines, b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the electric traction power supply system, c) suspended cable cars, d) funicular railways.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50163:2004/A3:2022(Amendment)
Railway applications - Supply voltages of traction systems
SIST EN 50163:2005/A3:2023

This European Standard specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications : – railways; – guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; – material transportation systems. This European Standard does not apply to – mine traction systems in underground mines, – cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system, – suspended cable cars, – funicular railways. This European Standard deals with long term overvoltages as shown in the Annex A.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50388-1:2022(Main)
Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability - Part 1: General
SIST EN 50388-1:2022

This document establishes requirements for the electrical aspects to achieve technical compatibility between rolling stock and electric traction systems, limited to: - co-ordination of protection principles between power supply and traction units, i.e. separation sections, train set current or power limitation, short circuit current discrimination, breaker coordination and use of regenerative braking. - co-ordination of installed power on the line and the power demand of trains, i.e. traction unit power factor, train set current or power limitation, electric system performance, type and characterization. - compatibility assessment relating to harmonics and dynamic effects. Informative values are given for some parts of the existing European railway networks, in annexes. NOTE For those railways within the scope of EU Interoperability Directive, definitive values are set out in the register of infrastructure published in accordance with Article 49 of Directive (EU) 2016/797, and the list of items included in the register is described in the commission decision (EU) 2019/777. The following electric traction systems are within the scope of this document: - railways; - guided mass transport systems that are integrated with railways; - material transport systems that are integrated with railways. Information is given on electrification parameters to enable train operating companies to confirm, after consultation with the rolling stock manufacturers, that risks of non-compatibility are minimized and that there will be no consequential disturbance on the electrification system. The interaction between pantograph and overhead contact line is dealt with in EN 50367:2020. The interaction with the control-command and signalling subsystem is not dealt with in this document. Basic considerations have been included concerning the use of accumulator trains.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50317:2012/A1:2022(Amendment)
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
SIST EN 50317:2012/A1:2022

This European Standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50318:2018/A1:2022(Amendment)
Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
SIST EN 50318:2019/A1:2022

Simulation techniques are used to assess the dynamic interaction between overhead contact lines and pantographs, as part of the prediction of current collection quality. This document specifies functional requirements for the validation of such simulation methods to ensure confidence in, and mutual acceptance of the results of the simulations. This document deals with: - input and output parameters of the simulation; - comparison with line test measurements, and the characteristics of those line tests; - validation of pantograph models; - comparison between different simulation methods; - limits of application of validated methods to assessments of pantographs and overhead contact lines. This document applies to the current collection from an overhead contact line by pantographs mounted on railway vehicles. It does not apply to trolley bus systems.

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
SIST-TS CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document. This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards. The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281). To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised. NOTE The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications. For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50152-4:2021(Main)
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 4: AC metal-enclosed traction switchgear
SIST-TS CLC/TS 50152-4:2021

This document specifies requirements for prefabricated metal-enclosed traction switchgear for alternating current with traction voltages and frequencies as specified in EN 50163:2004 and used in indoor and outdoor installations. Enclosures may include fixed and removable components and may be filled with fluid (liquid or gas) to provide insulation. NOTE 1 EN 50163 specifies the AC traction systems 15 kV 16,7 Hz and 25 kV 50 Hz. NOTE 2 This document applies to single-phase or two-phase systems. For metal-enclosed traction switchgear containing gas-filled compartments, the design pressure is limited to a maximum of 300 kPa (relative pressure). NOTE 3 EN 62271 203 can be used as a guide for design and testing in case the design pressure of gas-filled compartments exceeds 300 kPa (relative pressure). Components contained in metal-enclosed traction switchgear are to be designed and tested in accordance with their various relevant standards. This document supplements the standards for the individual components regarding their installation in traction switchgear assemblies. This document does not preclude that other equipment may be included in the same enclosure. In such a case, any possible influence of that equipment on the traction switchgear is to be taken into account. NOTE 4 Traction switchgear having an insulation enclosure is covered by EN 62271 201. For definition see there or IEV 441 12 06.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day