iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60349-1:2001

(Main)

Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors

Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors

Enables the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for a comparison with other machines. Applies to traction motors, engine driven main generators, main motor-generator sets, auxiliary motors, auxiliary generators, auxiliary motor-generator sets and auxiliary rotary convertors.

Elektrische Zugförderung - Drehende elektrische Maschinen für Bahn- und Straßenfahrzeuge -- Teil 1: Elektrische Maschinen ausgenommen umrichtergespeiste Wechselstrommotoren

Traction électrique - Machines électriques tournantes des véhicules ferroviaires et routiers -- Partie 1: Machines autres que les moteurs à courant alternatif alimentés par convertisseur électronique

Permet de confirmer par des essais, les qualités de fonctionnement d'une machine et de procurer une base d'estimation de son aptitude à fournir un service spécifié et une base de comparaison avec d'autres machines. S'applique aux moteurs de traction, génératrices principales entraînées par un moteur thermique, groupes moteurs-générateurs principaux, moteurs auxiliaires, génératrices auxiliaires, groupes moteurs-générateurs auxiliaires et convertisseurs tournants auxiliaires.

Električna vleka – Rotacijski električni stroji za železniška in cestna vozila – 1. del: Stroji, razen elektronsko napajanih izmeničnih motorjev (IEC 60349-1:1999)

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
17-Nov-2010
ICS
29.160.01 - Rotating machinery in general
29.280 - Electric traction equipment
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Nov-2010
Due Date
10-Dec-2010
Completion Date
18-Nov-2010
Ref Project
EN 60349-1:2000 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors

Relations

Amended By
SIST EN 60349-1:2001/A1:2003 - Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors
Effective Date
21-Sep-2010
Revised
SIST EN 60349-1:2011 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
Effective Date
05-Nov-2013
Amended By
SIST EN 60349-1:2001/A1:2003 - Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors
Effective Date
28-Jan-2023
Replaced By
SIST EN 60349-1:2011 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
Effective Date
29-Jan-2023
Replaced By
SIST EN 60349-1:2011 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
Effective Date
07-Jun-2022
Amended By
SIST EN 60349-1:2001/A1:2003 - Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic convertor-fed alternating current motors
Effective Date
07-Jun-2022
Replaces
SIST ENV 60349-2:1998 - Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors
Effective Date
01-Feb-2001
Replaced By
SIST EN 60349-1:2011 - Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
Effective Date
01-Jan-2011

Buy Standard

EN 60349-1:2001EN 60349-1:2001
PreviousNext
Standard
EN 60349-1:2001
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60349-1:2001
01-februar-2001
1DGRPHãþD
SIST ENV 60349-2:1998
(OHNWULþQDYOHND±5RWDFLMVNLHOHNWULþQLVWURML]DåHOH]QLãNDLQFHVWQDYR]LOD±GHO
6WURMLUD]HQHOHNWURQVNRQDSDMDQLKL]PHQLþQLKPRWRUMHY ,(&
Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1:
Machines other than electronic convertor-fed alternating current motors
Elektrische Zugförderung - Drehende elektrische Maschinen für Bahn- und
Straßenfahrzeuge -- Teil 1: Elektrische Maschinen ausgenommen umrichtergespeiste
Wechselstrommotoren
Traction électrique - Machines électriques tournantes des véhicules ferroviaires et
routiers -- Partie 1: Machines autres que les moteurs à courant alternatif alimentés par
convertisseur électronique
Ta slovenski standard je istoveten z: EN 60349-1:2000
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 60349-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 2 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 3 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 4 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 5 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 6 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 7 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 8 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 9 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 10 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 11 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 12 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 13 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 14 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 15 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 16 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 17 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 18 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 19 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 20 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 21 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 22 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 23 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 24 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 25 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 26 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 27 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 28 ----------------------

SIST EN 60349-1:2001

---------------------- Page: 29 ----------------------

SIST EN 60349-1:2001

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60349-4:2013(Main)
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter (IEC 60349-4:2012)
EN 60349-4:2013

This part of IEC 60349 applies to converter-fed permanent magnet synchronous motors or generators (machines) forming part of the equipment of electrically propelled rail and road vehicles. This standard is derived from IEC 60349-2 changing the subject to permanent magnet synchronous machines. The object of this part is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. Where further testing is to be undertaken in accordance with a combined test, it may be preferable, that some type and investigation tests be carried out on the combined test bed, to avoid duplication. Particular attention is drawn to the need for collaboration between the designers of the machine and its associated converter as detailed in 5.1. NOTE 1 This part also applies to machines installed on trailers hauled by powered vehicles. NOTE 2 The basic requirements of this part may be applied to machines for special purpose vehicles such as mine locomotives but this part does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this part should apply to machines on small road vehicles, such as battery-fed delivery vehicles, factory trucks, etc. This part also does not apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type machines complying with IEC 60034 may be suitable for some auxiliary drives, provided that it is demonstrated that operation on a converter supply will meet the requirements of the particular application. The electrical input to motors covered by this part is be from an electronic converter. Generators may be connected to a rectifier or a converter. The machines covered by this part are classified as follows:
a) Traction motors
Motors for propelling rail or road vehicles.
b) Main generators
Generators for supplying power to traction motors on the same vehicle or train.
c) Auxiliary motors not covered by IEC 60034
Motors for driving compressors, fans, auxiliary generators or other auxiliary machines.
d) Auxiliary generators not covered by IEC 60034
Generators for supplying power for auxiliary services such as air conditioning, heating, lighting and battery charging, etc.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60349-1:2011(Main)
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
EN 60349-1:2010

This part of IEC 60349 is applicable to rotating electrical machines, other than electronic converter-fed alternating current motors, forming part of the equipment of electrically propelled rail and road vehicles. The vehicles may obtain power either from an external supply or from an internal source. The object of this standard is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. Where further testing is to be undertaken in accordance with IEC 61377-2, it may be preferable, to avoid duplication, that some type and investigation tests be carried out on the combined test bed.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60349-4:2013(Main)
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter (IEC 60349-4:2012)
EN 60349-4:2013

This part of IEC 60349 applies to converter-fed permanent magnet synchronous motors or generators (machines) forming part of the equipment of electrically propelled rail and road vehicles. This standard is derived from IEC 60349-2 changing the subject to permanent magnet synchronous machines. The object of this part is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. Where further testing is to be undertaken in accordance with a combined test, it may be preferable, that some type and investigation tests be carried out on the combined test bed, to avoid duplication. Particular attention is drawn to the need for collaboration between the designers of the machine and its associated converter as detailed in 5.1. NOTE 1 This part also applies to machines installed on trailers hauled by powered vehicles. NOTE 2 The basic requirements of this part may be applied to machines for special purpose vehicles such as mine locomotives but this part does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this part should apply to machines on small road vehicles, such as battery-fed delivery vehicles, factory trucks, etc. This part also does not apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type machines complying with IEC 60034 may be suitable for some auxiliary drives, provided that it is demonstrated that operation on a converter supply will meet the requirements of the particular application. The electrical input to motors covered by this part is be from an electronic converter. Generators may be connected to a rectifier or a converter. The machines covered by this part are classified as follows:
a) Traction motors
Motors for propelling rail or road vehicles.
b) Main generators
Generators for supplying power to traction motors on the same vehicle or train.
c) Auxiliary motors not covered by IEC 60034
Motors for driving compressors, fans, auxiliary generators or other auxiliary machines.
d) Auxiliary generators not covered by IEC 60034
Generators for supplying power for auxiliary services such as air conditioning, heating, lighting and battery charging, etc.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60349-1:2011(Main)
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:2010)
EN 60349-1:2010

This part of IEC 60349 is applicable to rotating electrical machines, other than electronic converter-fed alternating current motors, forming part of the equipment of electrically propelled rail and road vehicles. The vehicles may obtain power either from an external supply or from an internal source. The object of this standard is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. Where further testing is to be undertaken in accordance with IEC 61377-2, it may be preferable, to avoid duplication, that some type and investigation tests be carried out on the combined test bed.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day