FprEN IEC 61800-5-1:2022

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

IEC 61800-5-1:2022 specifies requirements for adjustable speed electrical power drive systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy and other relevant hazards. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electrical PDS which include the power conversion, basic drive module (BDM)/complete drive module (CDM) control, and a motor or motors. Excluded are traction and electric vehicle BDM/CDM. It applies to low-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 1,0 kV AC (50 Hz or 60 Hz) and up to and including 1,5 kV DC. It also applies to high-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 35 kV AC (50 Hz or 60 Hz) and up to and including 52 kV DC. This document also applies to PDS which intentionally emits or receives radio waves for the purpose of radio communication. This edition includes the following significant technical changes with respect to the previous edition: a) harmonization with IEC 62477-1:2022; b) harmonization with UL 61800-5-1 and CSA C22.2 No. 274, including an annex with a list of national deviation which was considered not possible to harmonize within a reasonable timeframe; c) more detailed information about the evaluation of components according to this document and relevant safety component standards; d) updated requirement for mechanical hazards including multiple IP ratings.

Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 5-1: Anforderungen an die Sicherheit - Elektrische, thermische und energetische Anforderungen

Entraînements électriques de puissance à vitesse variable - Partie 5-1: Exigences de sécurité - Electrique, thermique et énergétique

L’IEC 61800-5-1:2022 spécifie les exigences relatives aux entraînements électriques de puissance (PDS – power drive system) à vitesse variable ou leurs éléments, en ce qui concerne les dangers électriques, thermiques, d'incendie, mécaniques et énergétiques, et d'autres risques appropriés. Elle ne couvre pas le matériel entraîné, à l’exception des exigences relatives aux interfaces. Elle s'applique aux PDS à vitesse variable qui incluent la conversion de puissance, la commande de module d’entraînement principal (BDM)/module d’entraînement complet (CDM) et un ou plusieurs moteurs. Les BDM/CDM pour les véhicules électriques et les véhicules de traction sont exclus. Elle s'applique aux PDS électriques à vitesse variable basse tension destinés à alimenter un ou plusieurs moteurs à partir d'un BDM/CDM relié à des tensions entre phases allant jusqu'à 1,0 kV inclus en courant alternatif (50 Hz ou 60 Hz) et jusqu'à 1,5 kV inclus en courant continu. Elle s'applique également aux PDS électriques à vitesse variable haute tension destinés à alimenter un ou plusieurs moteurs à partir d'un BDM/CDM relié à des tensions entre phases allant jusqu'à 35 kV inclus en courant alternatif (50 Hz ou 60 Hz) et jusqu'à 52 kV inclus en courant continu. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:  harmonisation avec l'IEC 62477-1:2022; harmonisation avec l'UL 61800-5-1 et la CSA C22.2 No 274, incluant une annexe contenant une liste des divergences nationales qui ont été considérées comme étant impossibles à harmoniser dans un délai raisonnable; informations plus détaillées relatives à l'évaluation des composants selon l'IEC 61800-5-1 et les normes pertinentes relatives aux composants de sécurité; exigences mises à jour concernant les dangers mécaniques, y compris plusieurs classifications IP.

Električni pogonski sistemi z nastavljivo hitrostjo - 5-1. del: Varnostne zahteve - Električne, toplotne in energijske

General Information

• Status: Not Published
• Publication Date: 12-Oct-2023
• ICS: 13.110 - Safety of machinery
• ICS: 29.130.99 - Other switchgear and controlgear
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22G - IEC_SC_22G
• Current Stage: 6055 - Ratification Completed (DOR) - Publishing
• Start Date: 05-Oct-2022
• Completion Date: 05-Oct-2022
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: kSIST FprEN IEC 61800-5-1:2022 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

Relations

• Revises: EN 61800-5-1:2007/A1:2017 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
• Effective Date: 23-Jan-2018
• Revises: EN 61800-5-1:2007/A11:2021 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
• Effective Date: 08-Feb-2022
• Revises: EN 61800-5-1:2007 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61800-5-1:2021
01-januar-2021
Električni pogonski sistemi z nastavljivo hitrostjo - 5-1. del: Varnostne zahteve -
Električne, toplotne in energijske
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 5-1:
Anforderungen an die Sicherheit - Elektrische, thermische und energetische
Anforderungen
Entraînements électriques de puissance à vitesse variable - Partie 5-1: Exigences de
sécurité - Electrique, thermique et énergétique
Ta slovenski standard je istoveten z: prEN IEC 61800-5-1:2020
ICS:
29.160.30 Motorji Motors
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
oSIST prEN IEC 61800-5-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61800-5-1:2021

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61800-5-1:2021


22G/429/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 61800-5-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-11-20 2021-02-12
SUPERSEDES DOCUMENTS:
22G/397A/CD, 22G/408A/CC

IEC SC 22G : ADJUSTABLE SPEED ELECTRIC POWER DRIVE SYSTEMS (PDS)


SECRETARIAT: SECRETARY:
United States of America Mr Christopher Johnson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 2,TC 22,TC 44,SC 121A,SC 121B
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

TITLE:
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and
energy

PROPOSED STABILITY DATE: 2024

NOTE FROM TC/SC OFFICERS:


Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61800-5-1:2021
61800-5-1/Ed3/CDV © IEC (E) – 2 – 22G/429/CDV
1
2 CONTENTS
3 1 Scope . 20
4 2 Normative references . 21
5 3 Terms and definitions . 24
6 4 Protection against hazards . 37
7 General . 37
8 Fault and abnormal operating condition . 38
9 Short-circuit and overload protection . 38
10 General . 38
11 Input short-circuit rating and output short-circuit current ability . 40
12 Short-circuit coordination (upstream protection) . 41
13 Protection by several devices . 41
14 Motor overload and overtemperature protection . 41
15 BDM/CDM providing current limiting control . 42
16 Protection against electric shock . 42
17 General . 42
18 Decisive voltage class (DVC) .
...