iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62321-11:2024

(Main)

Determination of certain substances in electrotechnical products - Part 11: Tris(2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)

Determination of certain substances in electrotechnical products - Part 11: Tris(2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)

This part of IEC 62321 specifies two different techniques for the determination of TCEP tris(2-chloroethyl) phosphate (TCEP) in plastics, the GC-MS or LC-MS method; both of which are suitable for quantitative analysis. These two techniques have been evaluated for use with polyurethane, Polyvinyl chloride and polyethylene materials containing TCEP between 200 mg/kg to 2 000 mg/kg. Use of the methods escribed in International Standard for other polymers and concentration ranges has not been specifically evaluated. These test methods do not apply to plastics materials having a processing temperature higher than 230 ℃. NOTE TCEP starts thermal decomposition at approximately 230 ℃. Polymer types which have a processing temperature into shapes of plastics (e.g. pellets, moulded parts, or sheets etc.) not exceeding the decomposition temperature can contain TCEP. Py-TD-GC-MS is another technique, suitable for the screening of TCEP in plastics (See Annex A).

Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik - Teil 11: Tris(2-chlorethyl)phosphat (TCEP) in Kunststoffen mit Gaschromatographie-Massenspektrometrie (GC-MS) und Flüssigkeitschromatographie-Massenspektrometrie (LC-MS)

Détermination de certaines substances dans les produits électrotechniques - Partie 11: Phosphate de tris(2-chloroéthyle) (TCEP) dans les plastiques par chromatographie en phase gazeuse-spectrométrie de masse (GC-MS) et chromatographie en phase liquide-spectrométrie de masse (LC-MS)

L'IEC 62321-11:2023 spécifie deux techniques différentes pour la détermination du phosphate de tris(2‑chloroéthyle) (TCEP) dans les plastiques, à savoir la méthode GC-MS et la méthode LC-MS, qui s'appliquent toutes les deux pour une analyse quantitative. Ces deux techniques s'appliquent aux matériaux en polyuréthane, en polychlorure de vinyle et en polyéthylène qui contiennent entre 200 mg/kg et 2 000 mg/kg de TCEP. Ces méthodes d'essai ne s'appliquent pas aux matières plastiques dont la température de mise en œuvre est supérieure à 230 °C. La technique de GC-MS à l'aide d'un pyrolyseur/accessoire de désorption thermique (Py/TD-GC-MS) est décrite à l'Annexe A et peut être utilisée pour la détection du TCEP dans les plastiques.

Določevanje posameznih snovi v elektrotehničnih izdelkih - 11. del: Določevanje tri(2-kloroetil) fosfata (TCEP) v polimernih materialih s plinsko kromatografijo in masno spektrometrijo (GC-MS) ter tekočinsko kromatografijo in masno spektrometrijo (LC-MS)

Ta del standarda IEC 62321 določa različni tehniki za določevanje tri(2-kloroetil) fosfata (TCEP) v polimernih materialih s plinsko kromatografijo in masno spektrometrijo (GC-MS) ter tekočinsko kromatografijo in masno spektrometrijo (LC-MS), oba postopka pa se uporabljata za kvantitativno analizo.
Obe tehniki se uporabljata s poliuretanskimi, polivinilkloridnimi in polietilenskimi materiali z vsebnostjo tri(2-kloroetil) fosfata med 200 mg/kg in 2000 mg/kg.
Metodi se ne uporabljata za polimerne materiale, ki imajo temperaturo obdelave večjo od 230 °C.
Plinska kromatografija in masna spektrometrija, ki uporablja tehniko za pirolizo/toplotno desorpcijo (Py/TD-GC-MS), je opisana v dodatku A in jo je mogoče uporabiti za presejanje tri(2-kloroetil) fosfata v polimernih materialih.
OPOMBA: Tri(2-kloroetil) fosfat sproži termično razgradnjo pri približno 230 °C. Vrste polimerov, ki imajo temperaturo obdelave v oblike polimernih materialov (npr. kroglice, vliti deli ali pločevina), ki ne presega temperature razgradnje, lahko vsebujejo tri(2-kloroetil) fosfat.

General Information

Status
Published
Publication Date
25-Jan-2024
ICS
13.020.01 - Environment and environmental protection in general
43.040.10 - Electrical and electronic equipment
Technical Committee
CLC/TC 111X - Environment
Drafting Committee
IEC/TC 111 - Environmental standardization for electrical and electronic products and systems
Current Stage
6060 - Document made available - Publishing
Start Date
26-Jan-2024
Completion Date
26-Jan-2024
Ref Project
SIST EN IEC 62321-11:2024 - Determination of certain substances in electrotechnical products - Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)

Buy Standard

EN IEC 62321-11:2024EN IEC 62321-11:2024
PreviousNext
Standard
EN IEC 62321-11:2024
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62321-11:2024
01-marec-2024
Določevanje posameznih snovi v elektrotehničnih izdelkih - 11. del: Določevanje
tri(2-kloroetil) fosfata (TCEP) v polimernih materialih s plinsko kromatografijo in
masno spektrometrijo (GC-MS) ter tekočinsko kromatografijo in masno
spektrometrijo (LC-MS)
Determination of certain substances in electrotechnical products - Part 11: Tris (2-
chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry
(GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
Določevanje posameznih snovi v elektrotehničnih izdelkih - 11. del: Določevanje ? tris (2-
kloroetil) fosfata (TCEP) v plastiki ? polimernih materialih ? s plinsko kromatografijo-
masno spektrometrijo (GC-MS) in tekočinsko kromatografijo-masno spektrometrijo (LC-
MS)
Détermination de certaines substances dans les produits électrotechniques - Partie 11:
Phosphate de tris(2-chloroéthyle) (TCEP) dans les plastiques par chromatographie en
phase gazeuse-spectrométrie de masse (GC-MS) et chromatographie en phase liquide-
spectrométrie de masse (LC-MS)
Ta slovenski standard je istoveten z: EN IEC 62321-11:2024
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
SIST EN IEC 62321-11:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62321-11:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 62321-11:2024


EUROPEAN STANDARD EN IEC 62321-11

NORME EUROPÉENNE

EUROPÄISCHE NORM January 2024
ICS 13.020.01; 43.040.10

English Version
Determination of certain substances in electrotechnical products
- Part 11: Tris(2-chloroethyl) phosphate (TCEP) in plastics by
gas chromatography-mass spectrometry (GC-MS) and liquid
chromatography-mass spectrometry (LC-MS)
(IEC 62321-11:2023)
Détermination de certaines substances dans les produits Verfahren zur Bestimmung von bestimmten Substanzen in
électrotechniques - Partie 11: Phosphate de tris(2- Produkten der Elektrotechnik - Teil 11: Tris(2-
chloroéthyle) (TCEP) dans les plastiques par chlorethyl)phosphat (TCEP) in Kunststoffen mit
chromatographie en phase gazeuse-spectrométrie de Gaschromatographie-Massenspektrometrie (GC-MS) und
masse (GC-MS) et chromatographie en phase liquide- Flüssigkeitschromatographie-Massenspektrometrie
spectrométrie de masse (LC-MS) (LC-MS)
(IEC 62321-11:2023) (IEC 62321-11:2023)
This European Standard was approved by CENELEC on 2024-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62321-11:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62321-11:2024
EN IEC 62321-11:2024 (E)
European foreword
The text of document 111/723/FDIS, future edition 1 of IEC 62321-11, prepared by IEC/TC 111
"Environmental standardization for electrical and electronic products and systems" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62321-11:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-19
document have to be withdrawn

Attention is drawn to the possibility that some of the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62321-3-3:2021(Main)
Determination of certain substances in electrotechnical products - Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD‑GC‑MS)
SIST EN IEC 62321-3-3:2021

This part of IEC 62321 specifies the screening analysis of polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP), and di-isodecyl phthalate (DIDP) in polymers of electrotechnical products using the analytical technique of gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS). This test method has been evaluated through the analysis of PP (polypropylene), PS (polystyrene), and PVC (polyvinyl chloride) materials containing deca-BDE between 100 mg/kg and 1 000 mg/kg and individual phthalates between 100 mg/kg to 4 000 mg/kg as depicted in Annex J. Use of the methods described in this document for other polymer types, PBBs (mono-deca), PBDEs (mono-deca) and phthalates or concentration ranges other than those specified above has not been specifically evaluated. This document has the status of a horizontal standard in accordance with IEC Guide 108 [1]1.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62321-9:2021(Main)
Determination of certain substances in electrotechnical products - Part 9: Hexabromocyclododecane in polymers by chromatography-mass spectrometry (GC-MS)
SIST EN IEC 62321-9:2021

This part of IEC 62321 specifies two techniques for the determination of hexabromocyclododecane (HBCDD) in polymers of electrotechnical products. The gas chromatography-mass spectrometry (GC-MS) test method is described in the normative part of this document. The GC-MS method is suitable for the determination of hexabromocyclododecane (HBCDD). A method using high-pressure liquid chromatography-mass spectrometry (HPLC-MS) is given in informative Annex A. These test methods have been evaluated for use with EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and ABS (acrylonitrile butadiene styrene) within the concentration ranges as specified in Table 1. The use of this method for other types of materials or concentration ranges outside those specified below has not been evaluated. [Table 1] This document has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62321-2:2021(Main)
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation
SIST EN IEC 62321-2:2022

This part of IEC 62321 provides strategies of sampling along with the mechanical preparation of samples from electrotechnical products. These samples can be used for analytical testing to determine the levels of certain substances as described in the test methods in other parts of the IEC 62321 series. Restrictions for substances will vary between geographic regions and can be updated on a regular basis. This document describes a generic process for obtaining and preparing samples prior to the determination of any substance of concern. This document does not provide: - full guidance on each and every product that could be classified as electrotechnical product. Since there is a huge variety of electrotechnical parts, with various structures and compositions, along with the continuous innovations in the industry, it is unrealistic to attempt to provide procedures for the disjointment of every type of part; - guidance regarding other routes to gather additional information on certain substances in a product, although the information collected has relevance to the sampling strategies in this document; - safe disassembly and mechanical disjointment instructions related to electrotechnical products (e.g. mercury-containing switches) and the recycling industry (e.g. how to handle CRTs or the safe removal of batteries). See IEC 62554 [1] 1 for the disjointment and mechanical sample preparation of mercury-containing fluorescent lamps; - sampling procedures for packaging and packaging materials; - analytical procedures to measure the levels of certain substances. This is covered by other standards (e.g. other parts of the IEC 62321 series), which are referred to as "test standards" in this document; - guidelines for assessment of compliance. This document has the status of a horizontal standard in accordance with IEC Guide 108 [2].

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62321-3-3:2021(Main)
Determination of certain substances in electrotechnical products - Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD‑GC‑MS)
SIST EN IEC 62321-3-3:2021

This part of IEC 62321 specifies the screening analysis of polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP), and di-isodecyl phthalate (DIDP) in polymers of electrotechnical products using the analytical technique of gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS). This test method has been evaluated through the analysis of PP (polypropylene), PS (polystyrene), and PVC (polyvinyl chloride) materials containing deca-BDE between 100 mg/kg and 1 000 mg/kg and individual phthalates between 100 mg/kg to 4 000 mg/kg as depicted in Annex J. Use of the methods described in this document for other polymer types, PBBs (mono-deca), PBDEs (mono-deca) and phthalates or concentration ranges other than those specified above has not been specifically evaluated. This document has the status of a horizontal standard in accordance with IEC Guide 108 [1]1.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62321-9:2021(Main)
Determination of certain substances in electrotechnical products - Part 9: Hexabromocyclododecane in polymers by chromatography-mass spectrometry (GC-MS)
SIST EN IEC 62321-9:2021

This part of IEC 62321 specifies two techniques for the determination of hexabromocyclododecane (HBCDD) in polymers of electrotechnical products. The gas chromatography-mass spectrometry (GC-MS) test method is described in the normative part of this document. The GC-MS method is suitable for the determination of hexabromocyclododecane (HBCDD). A method using high-pressure liquid chromatography-mass spectrometry (HPLC-MS) is given in informative Annex A. These test methods have been evaluated for use with EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and ABS (acrylonitrile butadiene styrene) within the concentration ranges as specified in Table 1. The use of this method for other types of materials or concentration ranges outside those specified below has not been evaluated. [Table 1] This document has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62321-2:2021(Main)
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation
SIST EN IEC 62321-2:2022

This part of IEC 62321 provides strategies of sampling along with the mechanical preparation of samples from electrotechnical products. These samples can be used for analytical testing to determine the levels of certain substances as described in the test methods in other parts of the IEC 62321 series. Restrictions for substances will vary between geographic regions and can be updated on a regular basis. This document describes a generic process for obtaining and preparing samples prior to the determination of any substance of concern. This document does not provide: - full guidance on each and every product that could be classified as electrotechnical product. Since there is a huge variety of electrotechnical parts, with various structures and compositions, along with the continuous innovations in the industry, it is unrealistic to attempt to provide procedures for the disjointment of every type of part; - guidance regarding other routes to gather additional information on certain substances in a product, although the information collected has relevance to the sampling strategies in this document; - safe disassembly and mechanical disjointment instructions related to electrotechnical products (e.g. mercury-containing switches) and the recycling industry (e.g. how to handle CRTs or the safe removal of batteries). See IEC 62554 [1] 1 for the disjointment and mechanical sample preparation of mercury-containing fluorescent lamps; - sampling procedures for packaging and packaging materials; - analytical procedures to measure the levels of certain substances. This is covered by other standards (e.g. other parts of the IEC 62321 series), which are referred to as "test standards" in this document; - guidelines for assessment of compliance. This document has the status of a horizontal standard in accordance with IEC Guide 108 [2].

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60704-2-14:2013/A2:2024(Amendment)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
SIST EN 60704-2-14:2013/A2:2024
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-2-44:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
SIST EN IEC 61300-2-44:2024

IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63305:2024(Main)
Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
SIST EN IEC 63305:2024

IEC 63305:2024 specifies methods and procedures for calibration of vector receivers in the frequency range 5 Hz to 10 kHz, which are applicable to vector receivers based on the two different principles. In addition, it describes an absolute method of inertial vector receiver calibration in air using optical interferometry. Usually, acoustic wave vector receivers are designed and constructed based on one of two principles. One is the sound pressure difference (gradient) principle. When measuring with this sensor, the vector receiver is rigidly fixed on a mount and supported in water. The other is the co-vibrating (inertial) principle. When measuring with this sensor, the vector receiver is suspended on a mount and supported in water in a non-rigid manner, which allows the vector receiver co-vibrate in the same direction as the sound particle in the sound wave field. Many methods have been used to calibrate vector receivers, such as free-field calibration, calibration in standing wave tube and calibration in a travelling wave tube.

  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62836:2024(Main)
Measurement of internal electric field in insulating materials - Pressure wave propagation method
SIST EN IEC 62836:2024

IEC 62836:2024 provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator. This first edition cancels and replaces IEC TS 62836 published in 2020. This edition includes the following significant technical changes with respect to IEC TS 62836: a) addition of Clause 12 for the measurement of space charge distribution in a planar sample; b) addition of Clause 13 for coaxial geometry samples; c) addition of Annex D with measurement examples for coaxial geometry samples; d) addition of a Bibliography; e) measurement examples for a planar sample have been moved from Clause 12 in IEC TS 62836 to Annex C.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day