EN 61249-2-19:2002

Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad

Gives requirements for properties of epoxide linear fibreglass reinforced copper-clad laminated sheet, of defined flammability, with a tickness range from 0,05 mm to 0,40 mm.

Materialien für Leiterplatten und andere Verbindungsstrukturen - Teil 2-19: Kaschierte und unkaschierte verstärkte Basismaterialien - Kupferkaschierte mit kreuzweise angeordnetem Glasfasergelege verstärkte Epoxidharz-Laminattafeln mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage)

Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-19: Matériaux de base renforcés, plaqués et non plaqués - Feuilles multicouches de fibre de verre linéaire cohérente avec résine époxyde pour hautes températures, d'inflammabilité définie (essai d'inflammabilité verticale), plaquées cuivre

Définit les caractéristiques des feuilles multicouches de fibre de verre linéaire cohérente liées par résine époxyde à revêtement de cuivre, d'inflammabilité définie, dont l'épaisseur est comprise entre 0,05 mm et 0,40 mm.

Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad

General Information

• Status: Published
• Publication Date: 19-Feb-2002
• Withdrawal Date: 31-Jan-2005
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Feb-2002
• Completion Date: 20-Feb-2002
• Ref Project: SIST EN 61249-2-19:2002 - Materials for printed boards and other interconnecting structures -- Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper cladMaterialien für Leiterplatten und andere Verbindungsstrukturen -- Teil 2-19: Kaschierte und unkaschierte verstärkte Basismaterialien - Kupferkaschierte mit kreuzweise angeordnetem Glasfasergelege verstärkte Epoxidharz-Laminattafeln mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage)Matériaux pour circuits imprimés et autres structures d'interconnexion -- Partie 2-19: Matériaux de base renforcés, plaqués et non plaqués - Feuilles multicouches de fibre de verre linéaire cohérente avec résine époxyde pour hautes températures, d'inflammabilité définie (essai d'inflammabilité verticale), plaquées cuivreMaterials for printed boards and other interconnecting structures -- Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad31.180SORãþHPrinted circuits and boardsICS:Ta slovenski standard je istoveten z:EN 61249-2-19:2002SIST EN 61249-2-19:2002en01-september-2002SIST EN 61249-2-19:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDEN 61249-2-19NORME EUROPÉENNEEUROPÄISCHE NORMFebruary 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61249-2-19:2002 EICS 31.180English versionMaterials for printed boards and other interconnecting structuresPart 2-19: Reinforced base materials, clad and unclad –Epoxide cross-plied linear fibreglass-reinforced laminated sheets ofdefined flammability (vertical burning test) copper clad(IEC 61249-2-19:2001)Matériaux pour circuits imprimés etautres structures d'interconnexionPartie 2-19: Matériaux de baserenforcés, plaqués et non plaqués –Feuilles multicouches de fibrede verre linéaire cohérente avecrésine époxyde pour hautestempératures, d'inflammabilité définie(essai d'inflammabilité verticale),plaquées cuivre(CEI 61249-2-19:2001)Materialien für Leiterplatten undandere VerbindungsstrukturenTeil 2-19: Kaschierte und unkaschierteverstärkte Basismaterialien -Kupferkaschierte mit kreuzweiseangeordnetem Glasfasergelegeverstärkte Epoxidharz-Laminattafelnmit definierter Brennbarkeit(Brennprüfung mit vertikalerPrüflingslage)(IEC 61249-2-19:2001)This European Standard was approved by CENELEC on 2002-02-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 61249-2-19:2002

- 3 -EN 61249-2-19:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 61189-21997Test methods for electrical materials,printed boards and otherinterconnection structures andassembliesPart 2: Test methods for materials forinterconnection structuresEN 61189-2+ corr. August19971997IEC 61249-5-11995Materials for interconnection structuresPart 5: Sectional specification set forconductive foils and films with andwithout coatings -- Section 1: Copperfoils (for the manufacture of copper-cladbase materials)EN 61249-5-11996ISO 9000SeriesQuality management systemsEN ISO 9000SeriesISO 140011996Environmental management systemsSpecification with guidance for useEN ISO 140011996ISO 11014-11994Safety data sheet for chemical productsPart 1: Content and order of sections--SIST EN 61249-2-19:2002

!"#"#$"""% &"%&'%! "" ( ""&")!"#&" %*+ "!"""%
""'(&"*)!"
!"#$$$$
! $©%# &⎯%'(!$(!&# #%$ %#) $%#*%###"#"#+"# %$$# #% , "## $"#,' %$%! % +,$-$
-#.%$+!%#) $$')%# #/$'+)'$'$,
!$ $, #(%! %'($ +,0!#%0(+!%#)!.$$
! $1,#2$)3&$,0/$+$4567881$5$9 . !0)!%5::000. . !SIST EN 61249-2-19:2002

<788©5=1=.? %.8$&+ .81$$$ # .81.#$()$.81.$+.7$$@(.?
$%%.<
$%%+! %% $$$.<.%%$$ +! %% $!.<.%%$$ +!# $+$ .?<.1! @.?<.7A0$0.?<.?%$! %%+).B<.<# !($$ !(.B<.B$$)'.B<.C!/.8<.8#%$.8B
$%%+!)$$$$+ %&$+! %%+.
...