Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 43: Runddrähte aus Kupfer, mit Band aus aromatischem Polyimid umwickelt, Klasse 240

Spécifications pour types particuliers de fils de bobinage - Partie 43: Fil de section circulaire en cuivre recouvert d'un ruban de polyimide aromatique, classe 240

Specifikacije za posebne tipe navitij - 43. del: Z aromatičnim poliimidom ovit bakren okrogel vodnik, razred 240 (IEC 60317-43:1997/A1:2010)

Amandma A1:2010 je dodatek k standardu SIST EN 60317-43:2001
Določa zahteve za ovit bakren okrogel vodnik razreda 240. Izolacija je sestavljena iz enkrat ali dvakrat ovitega traku iz aromatičnega poliimidioma. Razred 240 je toplotni razred, ki zahteva minimalni temperaturni indeks 240 in temperaturo toplotnega šoka vsaj 260 °C. Trak je na eni ali obeh straneh prevlečen s primernim lepilom, na primer s fluoriranim etilen-propilenom. Po ovitju se trak termično zatesni, da nastane neprekinjen in oprijet ovoj. Specifične zahteve so lahko predmet pogodbe.

General Information

Status
Published
Publication Date
08-Apr-2010
Withdrawal Date
31-Mar-2013
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
09-Apr-2010
Completion Date
09-Apr-2010

Relations

Buy Standard

Amendment
EN 60317-43:2001/A1:2010
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-43:2001/A1:2010
01-september-2010
6SHFLILNDFLMH]DSRVHEQHWLSHQDYLWLMGHO=DURPDWLþQLPSROLLPLGRPRYLW
EDNUHQRNURJHOYRGQLNUD]UHG ,(&$
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape
wrapped round copper wire, class 240 (IEC 60317-43:1997/A1:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 43:
Runddrähte aus Kupfer, mit Band aus aromatischem Polyimid umwickelt, Klasse 240
(IEC 60317-43:1997/A1:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 43: Fil de section
circulaire en cuivre recouvert d'un ruban de polyimide aromatique, classe 240 (CEI
60317-43:1997/A1:2010)
Ta slovenski standard je istoveten z: EN 60317-43:1997/A1:2010
ICS:
29.060.10 Žice Wires
SIST EN 60317-43:2001/A1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-43:2001/A1:2010

---------------------- Page: 2 ----------------------

SIST EN 60317-43:2001/A1:2010

EUROPEAN STANDARD
EN 60317-43/A1

NORME EUROPÉENNE
April 2010
EUROPÄISCHE NORM

ICS 29.060.10


English version


Specifications for particular types of winding wires -
Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
(IEC 60317-43:1997/A1:2010)


Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 43: Fil de section circulaire Teil 43: Runddrähte aus Kupfer, mit Band
en cuivre recouvert d'un ruban aus aromatischem Polyimid umwickelt,
de polyimide aromatique, classe 240 Klasse 240
(CEI 60317-43:1997/A1:2010) (IEC 60317-43:1997/A1:2010)




This amendment A1 modifies the European Standard EN 60317-43:1997; it was approved by CENELEC on
2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-43:1997/A1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60317-43:2001/A1:2010
EN 60317-43:1997/A1:2010 - 2 -
Foreword
The text of document 55/1175/FDIS, future amendment 1 to IEC 660317-43:1997, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 60317-43:1997 on 2010-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2011-01-01
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-04-01
with the amendment have to be withdrawn
__________
Endorsement notice
The text of amendment 1:2010 to the International Standard IEC 60317-43:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60317-43:2001/A1:2010
- 3 - EN 60317-43:1997/A1:2010
Replace the Annex ZA of EN 60317-43:1997 by:
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.