Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters

Applies to all line-commutated high-voltage direct current (HVDC) converter stations used for power exchange in utility systems. Presumes the use of 12-pulse thyristor converters but can also be used for 6-pulse thyristor converters. Presents procedures for determining the total losses of an HVDC converter station. Cover all parts, except synchronous compensators or static var compensators and address no-load operation and operating losses together with their methods of calculation which use, wherever possible, measured parameters.

Bestimmung der Leistungsverluste in Hochspannungsgleichstrom (HGÜ)-Stromrichterstationen mit netzgeführten Stromrichtern

Détermination des pertes en puissance dans les postes de conversion en courant continu à haute tension (CCHT) munis de convertisseurs commutés par le réseau

S'applique à tous les postes de conversion en courant continu à haute tnesion (CCHT), commutés par le réseau, et utilisés pour l'échange de puissance dans des systèmes de distribution d'énergie. Présuppose l'utilisation de convertisseurs à thyristors à 12 impulsions mais peut également s'appliquer à des convertisseurs à thyristors à 6 impulsions. Décrit un ensemble de procédures types permettant de déterminer l'ensemble des pertes d'un poste de conversion à CCHT. Les procédures recouvrent toutes les pièces, à l'exception des compensateurs synchrones ou des compensateurs var statiques et considèrent les pertes en fonctionnement à vide et les pertes en fonctionnement ainsi que leurs méthodes de calcul utilisant, dans la mesure du possible, des paramètres mesurés.

Ugotavljanje močnostnih izgub v visokonapetostnih enosmernih (HVDC) pretvorniških postajah s pretvorniki s komutiranjem (IEC 61803:1999/A2:2016) - Dopolnilo A2

General Information

Status
Withdrawn
Publication Date
13-Oct-2016
Withdrawal Date
13-Oct-2019
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Nov-2023
Completion Date
23-Nov-2023

Relations

Buy Standard

Amendment
EN 61803:2001/A2:2016
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61803:2001/A2:2016
01-december-2016
8JRWDYOMDQMHPRþQRVWQLKL]JXEYYLVRNRQDSHWRVWQLKHQRVPHUQLK +9'&
SUHWYRUQLãNLKSRVWDMDKVSUHWYRUQLNLVNRPXWLUDQMHP ,(&$ 
'RSROQLOR$
Determination of power losses in high-voltage direct current (HVDC) converter stations
with line-commutated converters (IEC 61803:1999/A2:2016)
Détermination des pertes en puissance dans les postes de conversion en courant
continu à haute tension (CCHT) munis de convertisseurs commutés par le réseau
Ta slovenski standard je istoveten z: EN 61803:1999/A2:2016
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 61803:2001/A2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61803:2001/A2:2016

---------------------- Page: 2 ----------------------

SIST EN 61803:2001/A2:2016


EUROPEAN STANDARD EN 61803:1999/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2016
ICS 29.200

English Version
Determination of power losses in high-voltage direct current
(HVDC) converter stations with line commutated converters
(IEC 61803:1999/A2:2016)
Détermination des pertes en puissance dans les postes de Bestimmung der Leistungsverluste in
conversion en courant continu à haute tension (CCHT) Hochspannungsgleichstrom (HGÜ)-Stromrichterstationen
munis de convertisseurs commutés par le réseau (IEC 61803:1999/A2:2016)
(IEC 61803:1999/A2:2016)
This amendment A2 modifies the European Standard EN 61803:1999; it was approved by CENELEC on 2016-06-29. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61803:1999/A2:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61803:2001/A2:2016
EN 61803:1999/A2:2016
European foreword
The text of document 22F/374/CDV, future IEC 61803:1999/A2, prepared by SC 22F “Power
electronics for electrical transmission and distribution systems” of IEC/TC 22 “Power electronic
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61803:1999/A2:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-04-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-10-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Endorsement notice
The text of the International Standard IEC 61803:1999/A2:2016 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 61803:2001/A2:2016



IEC 61803

®


Edition 1.0 2016-05




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AM ENDMENT 2

AM ENDEMENT 2





Determination of power losses in high-voltage direct current (HVDC) converter

stations with line commutated converters




Détermination des pertes en puissance dans les postes de conversion en

courant continu à haute tension (CCHT) munis de convertisseurs commutés par

le réseau















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.200 ISBN 978-2-8322-3358-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publicat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.