EN 60745-2-3:2011/A13:2015

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt

Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque

Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike - Dopolnilo A13

General Information

• Status: Published
• Publication Date: 19-Nov-2015
• Withdrawal Date: 27-Sep-2018
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Nov-2015
• Due Date: 14-Apr-2017
• Completion Date: 20-Nov-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: SIST EN 60745-2-3:2011/A13:2016 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

Relations

• Replaced By: EN IEC 62841-2-3:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
• Effective Date: 01-Jun-2021
• Amends: EN 60745-2-3:2011 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2016
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHEUXVLOQLNH'RSROQLOR$
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-3:2011/A13:2015
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60745-2-3:2011/A13

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 25.140.20
English Version
Hand-held motor-operated electric tools - Safety -
Part 2-3: Particular requirements for grinders, polishers and disk-
type sanders
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Handgeführte motorbetriebene Elektrowerkzeuge -
Règles particulières pour les meuleuses, lustreuses et Sicherheit - Teil 2-3: Besondere Anforderungen für
ponceuses du type à disque Schleifer, Polierer und Schleifer mit Schleifblatt
This amendment A13 modifies the European Standard EN 60745-2-3:2011; it was approved by CENELEC on 2015-09-28. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60745-2-3:2011/A13:2015 E

EN 60745-2-3:2011/A13
...