Cable management systems - Cable ties for electrical installations

IEC 62275:2013 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. It incorporates additional tables, an annex and figures as well as revisions to such that appeared in the first edition. In places the text has been substantially altered including: - revised and updated normative references, - integral cable ties and fixing devices, - change in the range of the diameter of the test mandrel, - general notes on tests, - mechanical properties and associated tests as well as tests for resistance to ultraviolet light and corrosion.

Kabelführungssysteme - Kabelbinder für elektrische Installationen

Systèmes de câblage - Colliers pour installations électriques

L'IEC 62275:2013 spécifie les exigences pour les colliers métalliques, non métalliques et composites ainsi que pour leurs accessoires de fixation associés, utilisés pour l'aménagement et le soutien des systèmes de câblage dans les installations électriques. Cette deuxième édition annule et remplace la première édition parue en 2006. Cette édition constitue une révision technique. Elle intègre des tableaux, une annexe et des figures supplémentaires ainsi que des révisions du texte de la première édition. Certains passages du texte ont subi d'importantes modifications, parmi lesquelles: - des révisions et mises à jour des références normatives, - ceux traitant des colliers et des accessoires de fixation intégrés, - une modification de la gamme de diamètres du mandrin d'essai, - des notes générales relatives aux essais, - ceux concernant les propriétés mécaniques et les essais associés ainsi que les essais de tenue aux rayonnements ultraviolets et à la corrosion.

Sistemi za urejanje pokabljenja - Kabelske vezice za električne inštalacije

General Information

Status
Published
Publication Date
26-Feb-2015
Current Stage
6060 - Document made available
Due Date
27-Feb-2015
Completion Date
27-Feb-2015

RELATIONS

Buy Standard

Standard
EN 62275:2015
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62275:2015
01-junij-2015
1DGRPHãþD
SIST EN 62275:2009
6LVWHPL]DXUHMDQMHSRNDEOMHQMD.DEHOVNHYH]LFH]DHOHNWULþQHLQãWDODFLMH
Cable management systems - Cable ties for electrical installations
Kabelführungssysteme - Kabelbinder für elektrische Installationen
Systèmes de câblage - Colliers pour installations électriques
Ta slovenski standard je istoveten z: EN 62275:2015
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 62275:2015 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62275:2015
---------------------- Page: 2 ----------------------
SIST EN 62275:2015
EUROPEAN STANDARD EN 62275
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2015
ICS 29.120.10; 29.120.99 Supersedes EN 62275:2009
English Version
Cable management systems - Cable ties for electrical
installations
(IEC 62275:2013 , modified)

Systèmes de câblage - Colliers pour installations Kabelführungssysteme - Kabelbinder für elektrische

électriques Installationen
(IEC 62275:2013 , modifiée) (IEC 62275:2013 , modifiziert)

This European Standard was approved by CENELEC on 2015-01-19. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62275:2015 E
---------------------- Page: 3 ----------------------
SIST EN 62275:2015
EN 62275:2015 - 2 -
Foreword

This document (EN 62275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable

management systems” of IEC/TC 23 "Electrical accessories", together with the common modifications

prepared by CLC/TC 213 "Cable management systems".
The following dates are fixed:
(dop) 2016-01-19
• latest date by which the document has to be
implemented at national level
by publication of an identical
national standard or by endorsement
(dow) 2018-01-19
• latest date by which the national standards conflicting
with the document have to be withdrawn
This document supersedes EN 62275:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment

Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice

The text of the International Standard IEC 62275:2013 was approved by CENELEC as a European

Standard with agreed common modifications.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 62275:2006 NOTE Harmonized as EN 62275:2009 (modified).
COMMON MODIFICATIONS
Annex A
Replace Annex A by:
---------------------- Page: 4 ----------------------
SIST EN 62275:2015
- 3 - EN 62275:2015
Annex A
(normative)
Compliance checks to be carried out for cable ties
and fixing devices complying with EN 62275:2009
Introduction

This normative annex relates to changed requirements. It informs where compliance checks are not

required and where compliance checks are required to be carried out in order that cables ties and

fixing devices can be declared to meet the requirements of EN 62275:2015 if the cable ties and fixing

devices already comply with EN 62275:2009.
Table A.1 - Required compliance checks
Test reference Description Compliance check
subclause
Marking and documentation
7.1 Marking of cable ties and fixing devices Not required
7.2 Durability and legibility marking Not required
7.3 Literature declaration Required only for specific mounting
or assembly conditions for fixing
devices
Construction
8 Surface and edges Not required
Mechanical properties
9.2 Installation test Not required
9.3 Minimum installation temperature test for cable ties Not required
9.4 Minimum operating temperature test for cable ties Not required
9.5.1 Loop tensile strength test for cable ties classified Not required
according to 6.2.2. As-received condition
9.5.2 Loop tensile strength test for cable ties classified Not required
according to 6.2.2. After heat aging
9.5.3 Loop tensile strength test for cable ties classified Not required
according to 6.2.2. After temperature cycling
9.6.1 Loop tensile strength test for cable ties classified Not required
according to 6.2.3. As-received condition
9.6.2 Loop tensile strength test for cable ties classified Not required
according to 6.2.3. After heat aging
9.6.3 Loop tensile strength test for cable ties classified Not required
according to 6.2.3. After temperature cycling
9.6.4 Loop tensile strength test for cable ties classified Not required
according to 6.2.3. After vibration test for metallic
cable ties

9.7.1 Mechanical strength test for fixing devices. As- Required only for fixing devices

received condition classified according to 6.2.2

9.7.2 Mechanical strength test for fixing devices. After Required only for fixing devices

heat aging classified according to 6.2.2

9.7.3 Mechanical strength test for fixing devices. After Required only for fixing devices

temperature cycling classified according to 6.2.2
Contribution to fire
10 Needle flame test Required only for metallic cable ties
with coating
Environmental influences
11.1 Resistance to ultraviolet light Not required
11.2 Resistance to corrosion (for metallic and composite Required
components)
---------------------- Page: 5 ----------------------
SIST EN 62275:2015
EN 62275:2015 - 4 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60695-11-5 2004 Fire hazard testing - EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame
test method - Apparatus, confirmatory
test arrangement and guidance
IEC 60216-4-1 2006 Electrical insulating materials - Thermal EN 60216-4-1 2006
endurance properties -
Part 4-1: Ageing ovens - Single-chamber
ovens
ISO 4892-2 2006 Plastics - Methods of exposure to EN ISO 4892-2 2006
laboratory light sources -
Part 2: Xenon-arc lamps
ISO 9227 2012 Corrosion tests in artificial atmospheres - EN ISO 9227 2012
Salt spray tests
---------------------- Page: 6 ----------------------
SIST EN 62275:2015
IEC 62275
Edition 2.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Cable management systems – Cable ties for electrical installations
Systèmes de câblage – Colliers pour installations électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 29.120.10, 29.120.99 ISBN 978-2-8322-1198-4

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62275:2015
– 2 – 62275 © IEC:2013
CONTENTS

FOREWORD ........................................................................................................................... 4

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 6

4 General requirements ...................................................................................................... 7

5 General notes on tests .................................................................................................... 8

6 Classification ................................................................................................................. 12

6.1 According to material ....................................................................................... 12

6.1.1 Metallic component ......................................................................... 12

6.1.2 Non-metallic component ................................................................. 12

6.1.3 Composite component .................................................................... 12

6.2 According to loop tensile strength for cable ties and mechanical strength

for fixing devices .............................................................................................. 12

6.2.1 Loop tensile strength for cable ties ................................................. 12

6.2.2 Type 1 – Retains at least 50 % of declared loop tensile
strength for cable ties and mechanical strength for fixing

devices after test conditions ........................................................... 12

6.2.3 Type 2 – Retains 100 % declared loop tensile strength for
cable ties and mechanical strength for fixing devices after test

conditions ....................................................................................... 12

6.3 According to temperature ................................................................................. 13

6.3.1 According to maximum operating temperature for application

given in Table 4 .............................................................................. 13

6.3.2 According to minimum operating temperature for application

given in Table 5 .............................................................................. 13

6.3.3 According to minimum temperature during installation as

declared by the manufacturer ......................................................... 13

6.4 According to contribution to fire for non-metallic and composite cable ties

only.................................................................................................................. 13

6.4.1 Flame propagating .......................................................................... 13

6.4.2 Non-flame propagating ................................................................... 13

6.5 According to environmental influences ............................................................. 14

6.5.1 According to resistance to ultraviolet light for non-metallic and

composite components ................................................................... 14

6.5.2 According to resistance to corrosion for metallic and

composite components ................................................................... 14

7 Marking and documentation ........................................................................................... 14

8 Construction .................................................................................................................. 15

9 Mechanical properties.................................................................................................... 15

9.1 Requirements .................................................................................................. 15

9.2 Installation test ................................................................................................ 15

9.3 Minimum installation temperature test for cable ties ......................................... 15

9.4 Minimum operating temperature test for cable ties ........................................... 16

9.5 Loop tensile strength test for cable ties classified according to 6.2.2 ............... 18

9.5.1 As-received condition ..................................................................... 18

9.5.2 After heat ageing ............................................................................ 18

9.5.3 After temperature cycling ................................................................ 18

---------------------- Page: 8 ----------------------
SIST EN 62275:2015
62275 © IEC:2013 – 3 –

9.6 Loop tensile strength test for cable ties classified according to 6.2.3 ............... 19

9.6.1 As-received condition ..................................................................... 19

9.6.2 After heat ageing ............................................................................ 19

9.6.3 After temperature cycling ................................................................ 19

9.6.4 After vibration test for metallic cable ties ........................................ 20

9.7 Mechanical strength test for fixing devices ....................................................... 21

9.7.1 As-received .................................................................................... 21

9.7.2 After heat ageing ............................................................................ 24

9.7.3 After temperature cycling ................................................................ 24

10 Contribution to fire ......................................................................................................... 24

11 Environmental influences ............................................................................................... 27

11.1 Resistance to ultraviolet light ........................................................................... 27

11.2 Resistance to corrosion.................................................................................... 29

12 Electromagnetic compatibility ........................................................................................ 30

Annex A (normative) Compliance checks to be carried out for cable ties and fixing

devices complying with IEC 62275:2006 ............................................................................... 31

Bibliography .......................................................................................................................... 33

Figure 1 – Reference thickness for cable ties .......................................................................... 9

Figure 2 – Typical arrangements for cable tie orientation on split mandrel for tensile

test 11

Figure 3 – Test apparatus for cable tie impact test ................................................................ 17

Figure 4 – Typical arrangement for the vibration test ............................................................ 21

Figure 5 – Typical arrangement of test assembly for fixing device test .................................. 23

Figure 6 – Arrangement for the needle flame test .................................................................. 26

Figure 7 – Recommended sample repositioning for ultraviolet light and water exposure ....... 29

Table 1 – Stabilisation time for samples .................................................................................. 8

Table 2 – Test mandrel diameter ........................................................................................... 10

Table 3 – Loop tensile strength ............................................................................................. 12

Table 4 – Maximum operating temperature for application .................................................... 13

Table 5 – Minimum operating temperature for application ..................................................... 13

Table 6 – Energy values of hammer ...................................................................................... 18

Table A.1 – Required compliance checks .............................................................................. 31

---------------------- Page: 9 ----------------------
SIST EN 62275:2015
– 4 – 62275 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CABLE MANAGEMENT SYSTEMS –
CABLE TIES FOR ELECTRICAL INSTALLATIONS
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62275 has been prepared by subcommittee 23A: Cable
management systems, of IEC technical committee 23: Electrical accessories.

This second edition cancels and replaces the first edition published in 2006 and constitutes a

technical revision. It incorporates additional tables, an annex and figures as well as revisions

to such that appeared in the first edition. In places the text has been substantially altered

including:
– revised and updated normative references,
– integral cable ties and fixing devices,
– change in the range of the diameter of the test mandrel,
– general notes on tests,

– mechanical properties and associated tests as well as tests for resistance to ultraviolet

light and corrosion.
---------------------- Page: 10 ----------------------
SIST EN 62275:2015
62275 © IEC:2013 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
23A/693/FDIS 23A/695/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

In this publication, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Notes: in smaller roman type.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN 62275:2015
– 6 – 62275 © IEC:2013
CABLE MANAGEMENT SYSTEMS –
CABLE TIES FOR ELECTRICAL INSTALLATIONS
1 Scope

This International Standard specifies requirements for metallic, non-metallic and composite

cable ties and their associated fixing devices used for the management and support of wiring

systems in electrical installations.

Cable ties and associated fixing devices may also be suitable for other applications and

where so used, regard should be taken of any additional requirements.

This standard does not contain requirements that evaluate any electrical insulation properties

of the cable tie or mechanical protection of the cables provided by the cable tie.

This standard does not consider the mechanical interface of a fixing device to a solid surface

such as a wall or ceiling.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and

are indispensable for its application. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any
amendments) applies.

IEC 60068-2-6:2007, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)

IEC 60695-11-5:2004, Fire hazard testing – Part 11-5: Test flames – Needle-flame test

method – Apparatus, confirmatory test arrangement and guidance

IEC 60216-4-1:2006, Electrical insulating materials – Thermal endurance properties – Part 4-

1: Ageing ovens – Single-chamber ovens

ISO 4892-2:2006, Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-

arc lamps
ISO 9227:2012, Corrosion tests in artificial atmospheres – Salt spray tests
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
cable tie

band or length of material, employing a locking device, used for bundling or tying groups of

cables together, securing and/or supporting the cables
Note 1 to entry: Type 1 and Type 2 cable ties are classified in 6.2.2 and 6.2.3.

Note 2 to entry: In some countries, such as Canada and the United States, additional Type classifications are

applicable when prequalified moulding materials are used. See UL 62275/CSA C22.2 No. 62275.

---------------------- Page: 12 ----------------------
SIST EN 62275:2015
62275 © IEC:2013 – 7 –
3.2
fixing device

component (such as a block or bracket) specifically designed to secure the cable tie to a

mounting surface

Note 1 to entry: A cable tie and the fixing device may be manufactured as an integrated component.

3.3
metallic component
component which consists of metal only
3.4
non-metallic component
component which consists of non-metallic material only
3.5
composite component
component comprising both metallic and non-metallic materials
3.6
environmental influence
effect of corrosive substances or solar radiation, etc.
3.7
loop tensile strength

reference mechanical characteristic of a cable tie with its locking mechanism engaged

3.8
locking device
feature of a cable tie for fixing it in a closed position
3.9
low hygroscopic polymer

polymer having the characteristic of not enabling attraction or holding water greater than

1,0 % by weight of the material from the surrounding environment at 23 °C and 50 % relative

humidity

Note 1 to entry: Examples of low hygroscopic polymers include: polypropylene, acetal, ethylene

tetrafluoroethylene, ethylene chlorotrifluoroethylene, nylon 12, polyetheretherketone.

3.10
equilibrium moisture content

state at which a polymer neither absorbs or releases moisture when exposed to a surrounding

environment of 23 °C and 50 % relative humidity
4 General requirements

A cable tie and a fixing device shall withstand the stresses likely to occur during recom-

mended installation practice and perform under the conditions of classifications in Clause 6 as

declared by the manufacturer.
Compliance is checked by carrying out all the appropriate specified tests.
---------------------- Page: 13 ----------------------
SIST EN 62275:2015
– 8 – 62275 © IEC:2013
5 General notes on tests

5.1 Tests according to this standard are type tests. Unless otherwise specified, tests are

carried out with the cable ties and their associated fixing devices, where available, installed

as in normal use according to the manufacturer's instructions.

NOTE For guidance in determining product types and sample sets, a family of cable ties or fixing devices having

material, construction characteristics, and classifications according to Clause 6, in common, are considered of the

same product type. Examples for consideration are material colours, or variable lengths of a cable tie of otherwise

similar construction.

The sample sets selected for testing from each product type is representative of the extremes of the range

(example: shortest and longest), and the minimum performance level obtained for either extreme is determined to

be representative of the entire range.

Consideration is given to minor construction variations that can be determined by inspection to have no effect on

performance, when determining product types.

5.2 Unless otherwise specified, tests on non-metallic and composite components shall

commence when the samples have been removed from their packaging and then stabilised at

a temperature of (23 ± 5) °C and at a relative humidity of (50 ± 5) %, for a period as indicated

in Table 1.

NOTE This stabilisation intends to achieve equilibrium of moisture content for all samples before and after further

conditioning and testing.
Table 1 – Stabilisation time for samples
Reference thickness (RT) of the Stabilization time
device days
RT ≤ 1,2 7 ± 1
1,2 < RT ≤ 1,4
1,4 < RT
All thicknesses of materials known to
2 ± 1/3
have low hygroscopic characteristics

The reference thickness of a cable tie is measured at the midpoint of the strap. The reference

thickness of a fixing device shall be the smallest cross section in the area that interfaces with

the cable tie or as declared by the manufacturer. See Figure 1.

When the equilibrium moisture content for a material at (23 ± 5) °C and (50 ± 5) % relative

humidity is determined through a method agreed to by the manufacturer and the testing

laboratory, the stabilisation time in Table 1 may be reduced when all of the following

conditions are met:

a) the product’s moisture content in the as-received condition and after each appropriate

conditioning is measured using a calibrated moisture analyzer device;

b) the samples are subjected to exposure to a constant temperature not exceeding 50 °C and

a relative humidity not exceeding 80 %; and

c) the product’s equilibrium moisture content at (23 ± 5) °C and (50 ± 5) % relative humidity

is verified using a calibrated moisture analyzer device.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.