EN 60216-4-1:2006
(Main)Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
Covers minimum requirements for ventilated and electrically heated single-chamber ovens, with or without forced gas circulation, for thermal endurance evaluation of electrical insulation. It covers ovens designed to operate over all or part of the temperature range from 20 °C above ambient to 500 °C. It gives acceptance tests and in-service monitoring tests for these ageing ovens. The main changes with regard to the previous edition is that this edition adapts IEC 60216-4-1 to the technical content and the editorial form of IEC 60216-4-2 and IEC 60216-4-3. In addition, errors and omissions in the third edition have been corrected.
Elektroisolierstoffe - Eigenschaften hinsichtlich des thermischen Langzeitverhaltens - Teil 4-1: Wärmeschränke für die Warmlagerung - Einzelkammerwärmeschränke
Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-1: Etuves de vieillissement - Etuves à une chambre
Električni izolacijski materiali - Lastnosti v zvezi s toplotno vzdržljivostjo - 4-1. del: Peči za staranje - Enoprekatne peči (IEC 60216-4-1:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2006
1DGRPHãþD
SIST HD 611.4.1 S1:1998
(OHNWULþQLL]RODFLMVNLPDWHULDOL/DVWQRVWLY]YH]LVWRSORWQRY]GUåOMLYRVWMRGHO
3HþL]DVWDUDQMH(QRSUHNDWQHSHþL ,(&
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens -
Single-chamber ovens (IEC 60216-4-1:2006)
Elektroisolierstoffe - Eigenschaften hinsichtlich des thermischen Langzeitverhaltens - Teil
4-1: Wärmeschränke für die Warmlagerung - Einzelkammerwärmeschränke (IEC 60216-
4-1:2006)
Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-1: Etuves de
vieillissement - Etuves à une chambre (CEI 60216-4-1:2006)
Ta slovenski standard je istoveten z: EN 60216-4-1:2006
ICS:
25.180.10
29.035.01
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60216-4-1
NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM
ICS 17.220.99; 29.035.01 Supersedes HD 611.4.1 S1:1992
English version
Electrical insulating materials -
Thermal endurance properties
Part 4-1: Ageing ovens -
Single-chamber ovens
(IEC 60216-4-1:2006)
Matériaux isolants électriques - Elektroisolierstoffe -
Propriétés d'endurance thermique Eigenschaften hinsichtlich
Partie 4-1: Etuves de vieillissement - des thermischen Langzeitverhaltens
Etuves à une chambre Teil 4-1: Wärmeschränke
(CEI 60216-4-1:2006)
für die Warmlagerung -
Einzelkammerwärmeschränke
(IEC 60216-4-1:2006)
This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60216-4-1:2006 E
Foreword
The text of document 112/16/FDIS, future edition 4 of IEC 60216-4-1, prepared by subcommittee 15E:
Methods of test, of IEC technical committee 15: Insulating materials, which has now been merged with
IEC technical committee 98: Electrical insulation systems into IEC technical committee 112: Evaluation
and qualification of electrical insulating materials and systems (provisional title), was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60216-4-1 on 2006-03-01.
This European Standard supersedes HD 611.4.1 S1:1992 .
The main changes with regard to HD 611.4.1 S1:1992 is the adaptation to the technical content and the
editorial form of EN 60216-4-2 and EN 60216-4-3. In addition, errors and omissions in
IEC 60216-4-1:1990 have been corrected.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60216-4-1:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60216-1 NOTE Harmonized as EN 60216-1:2001 (not modified).
IEC 60216-3 NOTE Harmonized as EN 60216-3:2002 (not modified).
IEC 60216-4-2 NOTE Harmonized as EN 60216-4-2:2000 (not modified).
IEC 60216-4-3 NOTE Harmonized as EN 60216-4-3:2000 (not modified).
IEC 60216-5 NOTE Harmonized as EN 60216-5:2003 (not modified).
IEC 60216-6 NOTE Harmonized as EN 60216-6:2004 (not modified).
IEC 60811-1-2 NOTE Harmonized as EN 60811-1-2:1995 (not modified).
__________
- 3 - EN 60216-4-1:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60335 (mod) Series Household and similar electrical appliances - EN 60335 Series
Safety
ISO/IEC 17025 2005 General requirements for the competence of EN ISO/IEC 17025 2005
testing and calibration laboratories
INTERNATIONAL IEC
STANDARD 60216-4-1
Fourth edition
2006-01
Electrical insulating materials –
Thermal endurance properties –
Part 4-1:
Ageing ovens –
Single-chamber ovens
IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale Q
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60216-4-1 IEC:2006(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .5
4 Constructional requirements .7
4.1 General .7
4.2 Mechanical requirements.7
4.3 Ventilation .7
4.4 Specimen mounting arrangements .8
4.5 Temperature control and indicator systems .8
5 Performance requirements .8
5.1 Temperature.8
5.2 Temperature difference and temperature fluctuation.9
5.3 Temperature variation .9
5.4 Maximum temperature deviation.9
5.5 Rate of ventilation .9
5.6 Exposure volume.9
5.7 Time constant.10
6 Test methods and procedure .10
6.1 General .10
6.2 Exposure volume.10
6.3 Temperature and related parameters.10
6.4 Rate of ventilation .11
6.5 Time constant.12
7 Report .12
8 Conditions of use and instructions for in-service monitoring by the user .13
8.1 Conditions of use .13
8.2 Procedure .13
8.3 In-service monitoring .13
Annex A (informative) Test method to determine the rate of ventilation .14
Annex B (informative) Examples for calculation of temperature deviation.16
Bibliography.17
Table 1 – Maximum allowable temperature differences and temperature fluctuations.9
Table 2 – Maximum allowable temperature variation .9
60216-4-1 IEC:2006(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSULATING MATERIALS –
THERMAL ENDURANCE PROPERTIES –
Part 4-1: Ageing ovens –
Single-chamber ovens
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60216-4-1 was prepared by subcommittee 15E: Methods of test, of
IEC technical committee 15: Insulating materials, which has now been merged with IEC
technical committee 98: Electrical insulation systems into IEC technical committee 112:
Evaluation and qualification of electrical insulating materials and systems (provisional title).
This fourth edition of IEC 60216-4-1 cancels and replaces the third edition, published in 1990,
and constitutes a technical revision.
The main changes with regard to the previous edi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.