EN 61188-5-6:2003

Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides

Provides information on land pattern geometries used for the surface attachment of electronic components with J leads on four sides. Provides the appropriate size, shape and tolerances of surface mount land patterns so as to ensure sufficient area for the appropriate solder fillet, and also allows for inspection, testing and reworking of resulting solder joints.

Leiterplatten und Flachbaugruppen - Konstruktion und Anwendung - Teil 5-6: Betrachtungen zur Montage (Anschlussfläche/Verbindung) - Bauelemente mit J-förmigen Anschlüssen auf vier Seiten

Cartes imprimées et cartes imprimées équipées - Conception et utilisation - Partie 5-6: Considérations sur les liaisons pistes-soudures - Composants à sorties en J sur quatre côtés

Donne des informations sur les géométries de zones de report utilisées pour la fixation des composants électroniques avec des sorties en J sur les quatre côtés. Fournit les dimensions, les formes et les tolérances appropriées des zones de report de montage en surface afin de garantir une surface suffisante au raccord de brasure approprié et permet également l'inspection, les essais et les retouches des joints de brasure.

Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides

General Information

• Status: Published
• Publication Date: 03-Apr-2003
• Withdrawal Date: 28-Feb-2006
• ICS: 31.190 - Electronic component assemblies
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Due Date: 04-Apr-2003
• Completion Date: 04-Apr-2003
• Ref Project: SIST EN 61188-5-6:2003 - Printed boards and printed board assemblies - Design and use -- Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2003
Printed boards and printed board assemblies - Design and use - Part 5-6:
Attachment (land/joint) considerations - Chip carriers with J-leads on four sides
Printed boards and printed board assemblies - Design and use -- Part 5-6: Attachment
(land/joint) considerations - Chip carriers with J-leads on four sides
Leiterplatten und Flachbaugruppen - Konstruktion und Anwendung -- Teil 5-6:
Betrachtungen zur Montage (Anschlussfläche/Verbindung) - Bauelemente mit J-förmigen
Anschlüssen auf vier Seiten
Cartes imprimées et cartes imprimées équipées - Conception et utilisation -- Partie 5-6:
Considérations sur les liaisons pistes-soudures - Composants à sorties en J sur quatre
côtés
Ta slovenski standard je istoveten z: EN 61188-5-6:2003
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61188-5-6
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 31.190
English version
Printed boards and printed board assemblies –
Design and use
Part 5-6: Attachment (land/joint) considerations –
Chip carriers with J-leads on four sides
(IEC 61188-5-6:2003)
Cartes imprimées et cartes imprimées Leiterplatten und Flachbaugruppen -
équipées – Konstruktion und Anwendung
Conception et utilisation Teil 5-6: Betrachtungen zur Montage
Partie 5-6: Considérations sur les liaisons (Anschlussfläche/Verbindung) -
pistes-soudures – Bauelemente mit J-förmigen Anschlüssen
Composants à sorties en J sur quatre auf vier Seiten
côtés (IEC 61188-5-6:2003)
(CEI 61188-5-6:2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61188-5-6:2003 E
Foreword
The text of document 91/338/FDIS, future edition 1 of IEC 61188-5-6, prepared by IEC TC 91,
Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61188-5-6 on 2003-03-01.
This European Standard should be read in conjunction with EN 61188-5-1:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61188-5-6:2003 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61188-5-6:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
- 1) 2)
IEC 60068-2-58 Environmental testing EN 60068-2-58 1999
Part 2-58: Tests - Test Td: Test
methods for solderability, resistance to
dissolution of metallization and to
soldering heat of surface mounting
devices (SMD)
1)
IEC 60191-2 - Mechanical standardization of - -
semiconductor devices
Part 2: Dimensions
1) 2)
IEC 61188-5-1 - Printed boards and printed board EN 61188-5-1 2002
assemblies - Design and use
Part 5-1: Attachment (land/joint)
considerations - Generic requirements

1) 2)
IEC 61760-1 - Surface mounting technology EN 61760-1 1998
Part 1: Standard method for the
specification of surface mounting
components (SMDs)
1)
Undated reference.
2)
Valid edition at date of issue.

�����
CEI
�������������� IEC
61188-5-6
�������������
����������������
��������
�������������
�������
Cartes imprimées et cartes imprimées équipées –
Conception et utilisation –
Partie 5-6:
Considérations sur les liaisons pistes-soudures –
Composants à sorties en J sur quatre côtés
Printed boards and printed board assemblies –
Design and use –
Part 5-6:
Attachment (land/joint) considerations –
Chip carriers with J-leads on four sides
©���#�������������������)����!����������*����⎯��#�)+��,-����.//���,-��������*��
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
������.����./� �/�!�����!-��!./� #���������0� � �0� ���� ��� 1.���"�0� ��� 2�3� ���0� #4������ 5���*.� ��0� �6��7��/.��
��/�)-���(�89�����:�:�������� ��/� .3(�89�����:�:�������� ���.�/(����.�/;��! #�������>
�
#�����������/�!�����!-��?���������.����./� ���#��#���
������.����./��/�!�����!-��!./�#���������
�����������������������������������������
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61188-5-6 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope and object .11
2 Normative references.11
3 General information .13
3.1 General component description .13
3.2 Marking .13
3.3 Carrier packaging format .13
3.4 Process considerations.13
4 QFJ (square) .13
4.1 Introductory remark .13
4.2 Component description .13
4.3 Component dimensions .17
4.4 Solder joint fillet design .17
4.5 Land pattern dimensions.21
5 QFJ (rectangular) .25
5.1 Introductory remark .25
5.2 Component description .25
5.3 Component dimensions .27
5.4 Solder joint fillet design .29
5.5 Land pattern dimensions.33
Bibliography.37
Figure 1 – QFJ (square) .15
Figure 2 – QFJ (square) dimensions .17
Figure 3 – Solder joint fillet design of QFJ square component with different levels
(see IEC 61188-5-1, Table 5) .21
Figure 4 – QFJ (square) land pattern dimensions .25
Figure 5 – QFJ (rectangular) .25
Figure 6 – QFJ (rectangular) dimensions.29
Figure 7 – Solder joint fillet design of QFJ rectangular component with different levels
(see IEC 61188-5-1, Table 5) .33
Figure 8 – QFJ (rectangular) land pattern dimensions .35

61188-5-6 © IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES –
DESIGN AND USE –
Part 5-6: Attachment (land/joint) considerations –
Chip carriers with J-leads on four sides
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international cooperation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on relevant subjects since each technical committee has representation from
all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61188-5-6 has been prepared by IEC technical committee 91:
Electronics assembly technology.
The text of this standard is based on the following documents:
FDIS Report on voting
91/338/FDIS 91/366/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 61188-5-6 should be read in conjunction with IEC 61188-5-1.

61188-5-6 © IEC:2003 – 7 –
IEC 61188-5 consists of the following parts, under the general title Printed boards and printed
board assemblies – Design and use :
Part 5-1: Attachment (land/joint) considerations – Generic requirements
Part 5-2: Attachment (land/joint) considerations – Discrete components
Part 5-3: Attachment (land/
...