Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints

IEC 62137-3:2011 describes the selection methodology of an appropriate test method for a reliability test for solder joints of various shapes and types of surface mount devices (SMD), array type devices and leaded devices, and lead insertion type devices using various types of solder material alloys. This first edition cancels and replaces IEC/PAS 62137-3, published in 2008, and includes some editorial revisions. The main changes with respect to the PAS include the following:
- no technical changes;
- some editorial changes and corrections;
- for the sake of convenience some constitutive changes.

Montageverfahren für elektronische Baugruppen - Teil 3: Leitfaden für die Auswahl von Umwelt- und (Lebens)dauerprüfungen für Lötverbindungen

Techniques d'assemblage des composants électroniques - Partie 3: Guide de choix des méthodes d'essai d'environnement et d'endurance des joints brasés

La CEI 62137-3:2011 présente la méthodologie de choix d'une méthode d'essai appropriée à un essai de fiabilité des joints brasés de divers types et formes de dispositifs montés en surface (CMS), de dispositifs du type en réseau, de dispositifs à connexions filaires et de dispositifs du type à insertion de connexions, utilisant divers types d'alliages de matériaux de soudure. Cette première édition annule et remplace la CEI/PAS 62137-3, publiée en 2008, et comporte des modifications éditoriales. Les principales modifications par rapport au PAS sont les suivantes:
- pas de modifications techniques;
- des corrections et modifications éditoriales;
- un réagencement du document.

Tehnologija elektronskega sestavljanja - 3. del: Napotki za izbiro metod za preskušanje vplivov na okolje in vzdržljivosti s kositrom spajkanih spojev

Ta del standarda IEC 62137 opisuje metodologijo za izbiro ustrezne metode za preskušanje zanesljivosti s kositrom spajkanih spojev na različnih oblikah in vrstah elementov za površinsko namestitev (SMD), elementov s ploskovnimi nizi, osvinčenih elementov in elementov s svinčenimi vstavki z uporabo različnih vrst zlitin za spajkanje.

General Information

Status
Published
Publication Date
19-Jan-2012
Withdrawal Date
12-Dec-2014
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
20-Jan-2012
Completion Date
20-Jan-2012

Buy Standard

Standard
EN 62137-3:2012 - BARVE
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62137-3:2012
01-marec-2012
Tehnologija elektronskega sestavljanja - 3. del: Napotki za izbiro metod za
preskušanje vplivov na okolje in vzdržljivosti s kositrom spajkanih spojev
Electronics assembly technology - Part 3: Selection guidance of environmental and
endurance test methods for solder joints
Montageverfahren für elektronische Baugruppen - Teil 3: Leitfaden für die Auswahl von
Umwelt- und (Lebens)dauerprüfungen für Lötverbindungen
Techniques d'assemblage des composants électroniques - Guide de choix des
méthodes d'essai d'environnement et d'endurance des joints brasés
Ta slovenski standard je istoveten z: EN 62137-3:2012
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
SIST EN 62137-3:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62137-3:2012

---------------------- Page: 2 ----------------------

SIST EN 62137-3:2012

EUROPEAN STANDARD EN 62137-3
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2012

ICS 31.190


English version


Electronics assembly technology -
Part 3: Selection guidance of environmental and endurance test methods
for solder joints
(IEC 62137-3:2011)


Techniques d'assemblage des Montageverfahren für elektronische
composants électroniques - Baugruppen -
Partie 3: Guide de choix des méthodes Teil 3: Leitfaden für die Auswahl von
d'essai d'environnement et d'endurance Umwelt- und (Lebens)dauerprüfungen für
des joints brasés Lötverbindungen
(CEI 62137-3:2011) (IEC 62137-3:2011)





This European Standard was approved by CENELEC on 2011-12-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62137-3:2012 E

---------------------- Page: 3 ----------------------

SIST EN 62137-3:2012
EN 62137-3:2012 - 2 -

Foreword
The text of document 91/986/FDIS, future edition 1 of IEC 62137-3, prepared by IEC/TC 91 "Electronics
assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62137-3:2012.

The following dates are fixed:
(dop) 2012-09-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-12-13

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 62137-3:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1:1988 NOTE  Harmonized as EN 60068-1:1994 (not modified).
+ A1:1992
IEC 60068-2-2 NOTE  Harmonized as EN 60068-2-2.
IEC 60068-2-14 NOTE  Harmonized as EN 60068-2-14.
IEC 60068-2-78 NOTE  Harmonized as EN 60068-2-78.
IEC 61760-1 NOTE  Harmonized as EN 61760-1.
IEC 62137:2004 NOTE  Harmonized as EN 62137:2004 (not modified).

---------------------- Page: 4 ----------------------

SIST EN 62137-3:2012
- 3 - EN 62137-3:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.