EN 62282-3-300:2012
(Main)Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
IEC 62282-3-300:2012 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: - intended for electrical connection to mains directly or with a readily accessible, manually operable switch or circuit-breaker; - intended for a stand-alone power distribution system; - intended to provide AC or DC power; - with or without the ability to recover useful heat.
Brennstoffzellentechnologien - Teil 3-300: Stationäre Brennstoffzellen-Energiesysteme - Installation
Technologies des piles à combustible - Partie 3-300: Systèmes à piles à combustible stationnaires - Installation
La CEI 62282-3-300:2012 fournit les exigences de sécurité minimales pour l'installation intérieure et extérieure des systèmes à piles à combustible stationnaires conformément à la CEI 62282-3-100 et s'applique à l'installation des systèmes mentionnés ci-après: - destinés à être connectés au réseau électrique directement ou via un interrupteur ou disjoncteur facilement accessible, pouvant fonctionner manuellement; - destinés à être un système de distribution d'énergie autonome; - destinés à fournir de l'énergie à courant alternatif ou à courant continu; - avec ou sans aptitude à récupérer la chaleur utile.
Tehnologije gorivnih celic - 3-300. del: Nepremični elektroenergetski sistemi z gorivnimi celicami - Namestitev
Ta del standarda IEC 62282 določa minimalne varnostne zahteve za namestitev notranjih in zunanjih nepremičnih elektroenergetskih sistemov z gorivnimi celicami v skladu s standardom IEC 62282-3-100 in se uporablja za namestitev sistemov: – namenjenih za električno povezavo z glavnim električnim omrežjem, neposredno ali prek lahko dostopnega ročnega stikala ali odklopnika; – namenjenih za samostojni sistem za distribucijo električne energije; – namenjenih za dobavo enosmernega ali izmeničnega toka; – s sposobnostjo pridobivanja koristne toplote ali brez nje. Ta standard je omejen na pogoje, ki se lahko vzpostavijo med postopkom namestitve in lahko povzročijo nevarnost za osebje ali poškodujejo opremo ali imetje izven elektroenergetskega sistema z gorivnimi celicami. Ta standard ne zajema varnostnih zahtev za nepremične elektroenergetske sisteme z gorivnimi celicami, ki so zajete v standardu IEC 62282-3-100. Poleg tega ta standard ne zajema: – dovoda goriva in/ali sistemov za shranjevanje goriva; – dobave in odstranjevanja pomožnih medijev; – stikal ali odklopnikov; – premičnih elektroenergetskih sistemov z gorivnimi celicami; – elektroenergetskih pogonskih sistemov z gorivnimi celicami; – uporabe pomožnih pogonskih enot (APU).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Brennstoffzellentechnologien - Teil 3-300: Stationäre Brennstoffzellen-Energiesysteme - ErrichtungTechnologies des piles à combustible - Partie 3-300: Systèmes à piles à combustible stationnaires - InstallationFuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation27.070Gorilne celiceFuel cellsICS:Ta slovenski standard je istoveten z:EN 62282-3-300:2012SIST EN 62282-3-300:2013en01-marec-2013SIST EN 62282-3-300:2013SLOVENSKI
STANDARD
SIST EN 62282-3-300:2013
EUROPEAN STANDARD EN 62282-3-300 NORME EUROPÉENNE
EUROPÄISCHE NORM October 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-3-300:2012 E
ICS 27.070 Supersedes EN 62282-3-3:2008
English version
Fuel cell technologies -
Part 3-300: Stationary fuel cell power systems -
Installation (IEC 62282-3-300:2012)
Technologies des piles à combustible -
Partie 3-300: Systèmes à piles à combustible stationnaires -
Installation (CEI 62282-3-300:2012)
Brennstoffzellentechnologien -
Teil 3-300: Stationäre-Brennstoffzellen-Energiesysteme -
Installation (IEC 62282-3-300:2012)
This European Standard was approved by CENELEC on 2012-07-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 62282-3-300:2013
EN 62282-3-300:2012 - 2 -
Foreword The text of document 105/377/FDIS, future edition 1 of IEC 62282-3-300, prepared by IEC/TC 105 "Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62282-3-300:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-04-19 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-07-19
This document supersedes EN 62282-3-3:2008. EN 62282-3-300:2012 includes the following significant technical changes with respect to EN 62282-3-3:2008: – addition in the scope to avoid overlapping between EN 62282-3-100 and EN 62282-3-300 concerning safety related requirements; – updating normative references and definitions; – requirements applicable to the stationary fuel cell removed, so that the target of this standard focuses on “installation risks”; – level of CO reduced for small fuel cell power systems which exhaust directly into a utility shed where they are installed, and where the shed is to ensure safety; – requirement for using a combustible gas detection system modified; – reference to the gas valve standard ISO 23551-1 added. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62282-3-300:2012 was approved by CENELEC as a European Standard without any modification. SIST EN 62282-3-300:2013
- 3 - EN 62282-3-300:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international public
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.