Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

Anforderungen an die Behandlung von Elektro- und Elektronik-Altgeräten (WEEE) - Teil 3-1: Spezifikation zur Schadstoffentfrachtung - Allgemeines

Exigences de collecte, logistique et traitement pour les DEEE - Partie 3-1: Spécifications relatives à la dépollution - Généralités

La présente Spécification Technique Européenne est destinée à être utilisée conjointement avec la norme relative au traitement des DEEE - EN 50625-1 - pour la plupart des types de DEEE (d'autres documents seront élaborés afin de définir les exigences concernant des DEEE particuliers nécessitant un traitement spécifique ).

Zahteve za zbiranje, logistiko in obdelavo odpadne električne in elektronske opreme (WEEE) - 3-1. del: Specifikacija za preprečevanje onesnaženja - Splošno

Ta tehnična specifikacija je namenjena uporabi skupaj s standardom 50625-1 za obdelavo odpadne električne in elektronske opreme (drugi dokumenti bodo pripravljeni za določitev zahtev za posebno odpadno električno in elektronsko opremo, ki zahteva posebno obravnavo).

General Information

Status
Published
Publication Date
08-Jan-2015
Technical Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-May-2019

Buy Standard

Technical specification
TS CLC/TS 50625-3-1:2015
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2015
=DKWHYH]D]ELUDQMHORJLVWLNRLQREGHODYRRGSDGQHHOHNWULþQHLQHOHNWURQVNH
RSUHPH :((( GHO6SHFLILNDFLMD]DSUHSUHþHYDQMHRQHVQDåHQMD6SORãQR
Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-
pollution - General
Anforderungen an die Behandlung von Elektro- und Elektronik-Altgeräten (WEEE) - Teil
3-1: Spezifikation zur Schadstoffentfrachtung - Allgemeines
Exigences de collecte, logistique et traitement pour les DEEE - Partie 3-1: Spécifications
relatives à la dépollution - Généralités
Ta slovenski standard je istoveten z: CLC/TS 50625-3-1:2015
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION CLC/TS 50625-3-1

SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
January 2015
ICS 29.100.01; 13.030.99; 31.220.01

English Version
Collection, logistics & treatment requirements for WEEE - Part 3-
1: Specification for de-pollution - General
Exigences de collecte, logistique et traitement pour les Anforderungen an die Behandlung von Elektro- und
DEEE - Partie 3-1: Spécifications relatives à la dépollution - Elektronik-Altgeräten (WEEE) - Teil 3-1: Spezifikation zur
Généralités Schadstoffentfrachtung - Allgemeines
This Technical Specification was approved by CENELEC on 2014-10-20.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC/TS 50625-3-1:2015 E

Contents Page
Foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 De-pollution monitoring . 7
4.1 Introduction . 7
4.2 Target value methodology . 7
4.3 Mass Balance methodology . 8
4.4 Analysis methodology . 8
5 Overview of the applicable methodologies — Applicable methodologies . 10
6 Large appliances . 11
6.1 Introduction . 11
6.2 Target value methodology . 11
6.3 Analysis methodology . 11
7 Cooling and freezing appliances . 12
7.1 Introduction . 12
7.2 Target values methodology . 12
7.3 Mass balance methodology . 12
7.4 Analysis methodology . 12
8 CRT display /FPD appliances . 13
8.1 Introduction . 13
8.2 CRT display appliances - Target value methodology . 13
8.3 CRT display appliances – Analysis methodology . 13
8.4 FPD appliances – Mass balance methodology . 14
8.5 FPD appliances - Analysis methodology . 14
9 Lamps — Introduction and analysis methodology . 14
10 Small appliances . 14
10.1 Introduction . 14
10.2 Target value methodology . 15
10.3 Analysis methodology . 15
11 Protocol for components removed during a batch process . 16
11.1 General procedure . 16
11.2 Capacitors . 16
11.3 Batteries. 17
Annex A (normative) Sampling protocol for the physically smallest non-metallic mechanical
treatment fraction . 18
A.1 Introduction . 18
A.2 Sampling . 18
A.2.1 Identification of the physically smallest non-metallic mechanical treatment fraction . 18
A.2.2 Population . 18
A.2.3 Number of samples . 18
A.2.4 Size of samples . 18
A.2.5 Principles of sampling . 19
A.2.5.1 Sampling during a treatment process . 19
A.2.5.2 Sampling after the treatment process . 19
A.2.6 Mixed sample preparation . 20
A.2.7 Mixed sample reduction . 20
A.2.8 Sample sieving . 20
A.2.9 Packaging of samples . 21
Annex B (normative) Sampling protocol for plastics . 22
B.1 Introduction . 22
B.2 Sampling . 22
B.2.1 Population . 22
B.2.2 Number of samples . 22
B.2.3 Size of samples . 22
B.2.4 Principle of sampling . 22
B.2.4.1 Sampling during a treatment process . 22
B.2.4.2 Sampling after the treatment process . 23
B.2.5 Mixed sample preparation . 24
B.2.6 Mixed sample reduction . 24
B.2.7 Packaging and sending of samples . 24
Annex C (normative) Targets . 25
Annex D (informative) Target calculation example — Calculation example for large appliance . 26
Bibliography . 27

Foreword
This document (CLC/TS 50625-3-1:2015) has been prepared by CLC/TC 111X "Environmental aspects for
electrical and electronic products and systems".
EN 50625 is currently composed of the following parts:
• EN 50625-1, Collection, logistics & Treatment requirements for WEEE — Part 1: General treatment
requirements;
• EN 50625-2-1, Collection, logistics & Treatment requirements for WEEE — Part 2-1: Treatment
requirements for lamps;
• CLC/TS 50625-3-1, Collection, logistics & treatment requirements for WEEE — Part 3-1: Specification
for de-pollution — General [the present document].
This document has been prepared under the mandate M/518 given to CENELEC by the European
Commission and the European Free Trade Association.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Introduction
In order to support the European Standard EN 50625-1 which covers treatment of WEEE and thereby fulfils
the requirement of the European Commission’s Mandate, it is necessary to include normative requirements,
such as target and limit values for the analysis, into a document that may be revised to take into account
both practical experience and changes in treatment technologies.

1 Scope
This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard
EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific
WEEE requiring more specialised treatment).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 13656, Characterization of waste — Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3)
and hydrochloric (HCl) acid mixture for subsequent determination of elements
EN 14582, Characterization of waste — Halogen and sulphur content — Oxygen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.