Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly

IEC 61249-4-14:2009(E) gives requirements for properties of prepreg that are mainly intended to be used as bonding sheets in connection with laminates according to IEC 61249-2-36 when manufacturing multilayer boards according to IEC 62326-4. Multilayer boards comprised of these materials are suitable for lead-free assembly processes. This material may also be used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test). The flammability rating on fully cured prepreg is achieved through the use of brominated fire retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier's instructions, the glass transition temperature is defined to be 120 °C minimum.

Materialien für Leiterplatten und andere Verbindungsstrukturen – Teil 4-14: Rahmenspezifikationen für unkaschierte Prepreg-Materialien (zur Herstellung von Mehrlagenleiterplatten) – Mit E-Glasgewebe verstärkte Epoxidharz-Prepregs mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage) für bleifreie Bestückungstechnik

Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-14: Série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués (pour la fabrication des cartes multicouches) - Tissu de verre époxyde préimprégné de type E d'inflammabilité définie (essai de combustion verticale) destiné aux assemblages sans plomb

La CEI 61249-4-14:2009 fournit des exigences concernant les propriétés des préimprégnés principalement prévus pour être utilisés en tant que feuilles de collage en relation avec des stratifiés selon la CEI 61249-2-36 durant la fabrication des cartes multicouches selon la CEI 62326-4. Les cartes multicouches constituées de ces matériaux conviennent pour des processus d'assemblage sans plomb. Ce matériau peut également être utilisé pour coller d'autres types de stratifiés. Un préimprégné, selon la présente norme, est d'une inflammabilité définie (essai de combustion verticale). L'inflammabilité nominale d'un préimprégné entièrement traité est obtenue en utilisant des retardateurs de flamme bromés faisant partie intégrante de la structure polymère. Après traitement du préimprégné selon les instructions du fabricant, la température de transition vitreuse est définie comme étant au minimum de 120 °C.

Materiali za tiskane plošče in druge povezovalne strukture - 4-14. del: Posamezne zahteve za prepreg materiale brez bakrene folije (za izdelavo večplastnih plošč) - S stekleno tkanino ojačen prepreg definirane gorljivosti (navpični preskus gorljivosti), obdelan z epoksidno smolo, za montažo brez svinca (IEC 61249-4-14:2009)

Ta del IEC 61249 podaja zahteve za lastnosti preprega, ki so v glavnem namenjene temu, da se uporabljajo kot vezne plošče v povezavi z laminati, v skladu z IEC 61249-2-36, pri proizvodnji večplastnih plošč v skladu z IEC 62326-4. Večplastne plošče, ki jih tvorijo ti materiali, so primerne za postopke montaže brez svinca. Ta material se lahko uporablja tudi za vezavo drugih tipov laminatov. Prepreg je v skladu s tem standardom opredeljene gorljivosti (navpični preizkus gorljivosti). Ocena gorljivosti na popolnoma vulkaniziranem prepregu se doseže z uporabo bromiranih zaščitnih sredstev proti požaru, ki so vsebovana kot sestavni del polimerne strukture. Po vulkanizaciji preprega v skladu z navodili dobavitelja je točka posteklenitve opredeljena pri najmanj 120°C. 2 Normativna referenca.

General Information

Status
Published
Publication Date
31-Aug-2009
Withdrawal Date
31-May-2012
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
30-Jun-2009
Completion Date
30-Jun-2009

Buy Standard

Standard
EN 61249-4-14:2010
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61249-4-14:2010
01-januar-2010

0DWHULDOL]DWLVNDQHSORãþHLQGUXJHSRYH]RYDOQHVWUXNWXUHGHO3RVDPH]QH

]DKWHYH]DSUHSUHJPDWHULDOHEUH]EDNUHQHIROLMH ]DL]GHODYRYHþSODVWQLKSORãþ 6

VWHNOHQRWNDQLQRRMDþHQSUHSUHJGHILQLUDQHJRUOMLYRVWL QDYSLþQLSUHVNXV
JRUOMLYRVWL REGHODQ]HSRNVLGQRVPROR]DPRQWDåREUH]VYLQFD ,(&


Materials for printed boards and other interconnecting structures -- Part 4-14: Sectional

specification set for prepreg materials, unclad (for the manufacture of multilayer boards) -

Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-

free assembly
Ta slovenski standard je istoveten z: EN 61249-4-14:2009
ICS:
31.180 7LVNDQDYH]MD 7,9 LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61249-4-14:2010 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61249-4-14:2010
---------------------- Page: 2 ----------------------
SIST EN 61249-4-14:2010
EUROPEAN STANDARD
EN 61249-4-14
NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM
ICS 31.180
English version
Materials for printed boards and other interconnecting structures -
Part 4-14: Sectional specification set for prepreg materials, unclad
(for the manufacture of multilayer boards) -
Epoxide woven E-glass prepreg of defined flammability
(vertical burning test) for lead-free assembly
(IEC 61249-4-14:2009)
Matériaux pour circuits imprimés Materialien für Leiterplatten
et autres structures d'interconnexion - und andere Verbindungsstrukturen -
Partie 4-14: Série de spécifications Teil 4-14: Rahmenspezifikationen
intermédiaires pour matériaux préimprégnés, für unkaschierte Prepreg-Materialien

non plaqués (pour la fabrication des cartes (zur Herstellung von Mehrlagenleiterplatten) -

multicouches) - Mit E-Glasgewebe verstärkte Epoxidharz-
Tissu de verre époxyde préimprégné Prepregs mit definierter Brennbarkeit
de type E d'inflammabilité définie (Brennprüfung mit vertikaler Prüflingslage)
(essai de combustion verticale) für bleifreie Bestückungstechnik
destiné aux assemblages sans plomb (IEC 61249-4-14:2009)
(CEI 61249-4-14:2009)

This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61249-4-14:2009 E
---------------------- Page: 3 ----------------------
SIST EN 61249-4-14:2010
EN 61249-4-14:2009 - 2 -
Foreword

The text of document 91/850/FDIS, future edition 1 of IEC 61249-4-14, prepared by IEC TC 91,

Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by

CENELEC as EN 61249-4-14 on 2009-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 61249-4-14:2009 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60194 NOTE Harmonized as EN 60194:2006 (not modified).
IEC 61249-2-7 NOTE Harmonized as EN 61249-2-7:2002 (not modified).
IEC 61249-2-8 NOTE Harmonized as EN 61249-2-8:2003 (not modified).
ISO 9000 NOTE Harmonized as EN ISO 9000:2005 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 61249-4-14:2010
- 3 - EN 61249-4-14:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Publication Year Title EN/HD Year
IEC 61189-2 2006 Test methods for electrical materials, printed EN 61189-2 2006
boards and other interconnection structures
and assemblies -
Part 2: Test methods for materials for
interconnection structures
1) 2)
IEC 61249-2-36 - Materials for printed boards and other EN 61249-2-36 2009
interconnecting structures -
Part 2-36: Reinforced base materials, clad
and unclad - Epoxide woven E-glass laminate
sheets of defined flammability (vertical burning
test), copper-clad for lead-free assembly
1) 2)
IEC 62326-4 - Printed boards - EN 62326-4 1997
Part 4: Rigid multilayer printed boards with
interlayer connections - Sectional specification
ISO 11014-1 1994 Safety data sheet for chemical products - - -
Part 1: Content and order of sections
Undated reference.
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 61249-4-14:2010
---------------------- Page: 6 ----------------------
SIST EN 61249-4-14:2010
IEC 61249-4-14
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
Materials for printed boards and other interconnecting structures –
Part 4-14: Sectional specification set for prepreg materials, unclad (for the
manufacture of multilayer boards) – Epoxide woven E-glass prepreg of defined
flammability (vertical burning test) for lead-free assembly
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
ICS 31.180 ISBN 2-8318-1043-3
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 61249-4-14:2010
– 2 – 61249-4-14 © IEC:2009(E)
CONTENTS

FOREWORD...........................................................................................................................4

1 Scope...............................................................................................................................6

2 Normative references .......................................................................................................6

3 Materials and construction................................................................................................6

3.1 Reinforcement.........................................................................................................6

3.2 Resin system...........................................................................................................7

4 Properties.........................................................................................................................7

4.1 Properties related to the appearance of the prepreg ................................................7

4.1.1 Dewetted areas (fish eyes) ..........................................................................7

4.1.2 Broken filaments..........................................................................................7

4.1.3 Distortion.....................................................................................................7

4.1.4 Creases.......................................................................................................7

4.1.5 Edge conditions...........................................................................................7

4.2 Properties related to B-stage prepreg......................................................................7

4.2.1 Resin content ..............................................................................................8

4.2.2 Treated weight.............................................................................................8

4.2.3 Resin flow ...................................................................................................8

4.2.4 Scaled flow thickness ..................................................................................8

4.2.5 Melting viscosity ..........................................................................................8

4.2.6 Gel time.......................................................................................................9

4.2.7 Volatile content............................................................................................9

4.3 Properties related to prepreg after curing ................................................................9

4.3.1 Electric strength ..........................................................................................9

4.3.2 Flammability ................................................................................................9

4.3.3 Relative permittivity and dissipation factor .................................................10

4.3.4 Cured thickness.........................................................................................10

4.3.5 Glass transition temperature (Tg) ..............................................................10

4.3.6 Decomposition temperature (Td)................................................................10

4.3.7 Thermal resistance ....................................................................................11

4.3.8 Z-axis expansion .......................................................................................11

5 Delivery form ..................................................................................................................11

5.1 Rolls......................................................................................................................11

5.2 Sheets...................................................................................................................11

5.3 Cut panels.............................................................................................................11

6 Quality assurance...........................................................................................................12

6.1 Quality system.......................................................................................................12

6.2 Responsibility for inspection ..................................................................................12

6.3 Qualification inspection .........................................................................................12

6.4 Quality conformance inspection.............................................................................12

6.5 Certificate of conformance.....................................................................................12

6.6 Safety data sheet ..................................................................................................12

7 Packaging and marking ..................................................................................................12

8 Shelf life.........................................................................................................................13

9 Ordering information.......................................................................................................13

Bibliography..........................................................................................................................14

---------------------- Page: 8 ----------------------
SIST EN 61249-4-14:2010
61249-4-14 © IEC:2009(E) – 3 –

Table 1 – Flammability, vertical burning test .........................................................................10

Table 2 – Decomposition temperature requirements .............................................................10

Table 3 – Thermal resistance requirements ..........................................................................11

Table 4 – Z-axis expansion requirements..............................................................................11

---------------------- Page: 9 ----------------------
SIST EN 61249-4-14:2010
– 4 – 61249-4-14 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
MATERIALS FOR PRINTED BOARDS AND
OTHER INTERCONNECTING STRUCTURES –
Part 4-14: Sectional specification set for prepreg materials, unclad
(for the manufacture of multilayer boards) –
Epoxide woven E-glass prepreg of defined flammability
(vertical burning test) for lead-free assembly
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61249-4-14 has been prepared by IEC technical committee 91:

Electronics assembly technology.
The text of this standard is based on the following documents:
FDIS Report on voting
91/850/FDIS 91/862/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 10 ----------------------
SIST EN 61249-4-14:2010
61249-4-14 © IEC:2009(E) – 5 –

A list of all parts of the IEC 61249 series, under the general title Materials for printed boards

and other interconnecting structures, can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the maintenance result d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.