EN IEC 60730-2-14:2019/A1:2022
(Amendment)Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatische elektrische Regel- und Steuergeräte - Teil 2-14: Besondere Anforderungen an elektrische Stellantriebe
Dispositifs de commande électrique automatiques - Partie 2-14: Exigences particulières pour les actionneurs électriques
Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna prožila
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2024
Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna
prožila
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatische elektrische Regel- und Steuergeräte - Teil 2-14: Besondere
Anforderungen an elektrische Stellantriebe
Dispositifs de commande électrique automatiques - Partie 2-14: Exigences particulières
pour les actionneurs électriques
Ta slovenski standard je istoveten z: EN IEC 60730-2-14:2019/A1:2022
ICS:
29.120.01 Električna dodatna oprema Electrical accessories in
na splošno general
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60730-2-14:2019/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2022
ICS 29.120.01; 97.120
English Version
Automatic electrical controls - Part 2-14: Particular requirements
for electric actuators
(IEC 60730-2-14:2017/A1:2019)
Dispositifs de commande électrique automatiques - Automatische elektrische Regel- und Steuergeräte -
Partie 2-14: Exigences particulières pour les actionneurs Teil 2-14: Besondere Anforderungen an elektrische
électriques Stellantriebe
(IEC 60730-2-14:2017/A1:2019) (IEC 60730-2-14:2017/A1:2019)
This amendment A1 modifies the European Standard EN IEC 60730-2-14:2019; it was approved by CENELEC on 2022-05-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60730-2-14:2019/A1:2022 E
European foreword
This document (EN IEC 60730-2-14:2019/A1:2022) consists of the text of IEC 60730-2-14:2017/AMD1:2019
prepared by IEC/TC 72 “Automatic electrical controls”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-05-17
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2025-05-17
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60730-2-14:2017/AMD1:2019 was approved by CENELEC as a
European Standard without any modification.
IEC 60730-2-14 ®
Edition 2.0 2019-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Automatic electrical controls –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques –
Partie 2-14: Exigences particulières pour les actionneurs électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.01; 97.120 ISBN 978-2-8322-6561-1
– 2 – IEC 60730-2-14:2017/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic electrical
controls.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/1168FDIS 72/1175/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
FOREWORD
Replace the paragraph reading "This Part 2-14 is intended…", with the following:
This part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the fifth edition of that standard (2013) including its amendment 1 (2015).
Consideration may be given to future editions of, or amendments to, IEC 60730-1.
1 Scope and normative references
1.1 Add the following new text:
This part 2-14 applies to electric actuators powered by primary or secondary batteries,
requirements for which are contained within the stan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.