Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules

IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.

Organische Licht emittierende Dioden (OLED) Lichtquellen für die Allgemeinbeleuchtung - Sicherheit - Teil 2-2: Besondere Anforderungen - Integrierte OLED-Module

Sources lumineuses à diodes électroluminescentes organiques (OLED) destinées à l’éclairage général - Sécurité - Partie 2-2: Exigences particulières - Modules OLED intégrés

L’IEC 62868-2-2:2020 spécifie les exigences de sécurité pour les modules à diodes électroluminescentes organiques (OLED) intégrés destinés à être utilisés avec des alimentations en courant continu lissé jusqu’à 1 000 V ou avec des alimentations en courant alternatif jusqu’à 1 000 V, en valeur efficace, à 50 Hz ou 60 Hz.

Organska svetleča dioda (OLED), svetlobni viri za splošno razsvetljavo - Varnost - 2-2. del: Posebne zahteve - Integrirani moduli OLED (IEC 62868-2-2:2020)

General Information

Status
Published
Current Stage
6060 - Document made available
Due Date
05-Nov-2021
Completion Date
05-Nov-2021

Buy Standard

Standard
EN IEC 62868-2-2:2022
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 62868-2-2:2022
01-januar-2022

Organska svetleča dioda (OLED), svetlobni viri za splošno razsvetljavo - Varnost -

2-2. del: Posebne zahteve - Integrirani moduli OLED (IEC 62868-2-2:2020)

Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2:

Particular requirements - Integrated OLED modules (IEC 62868-2-2:2020)

Organische Licht emittierende Dioden (OLED) Lichtquellen für die Allgemeinbeleuchtung

- Sicherheit - Teil 2-2: Besondere Anforderungen - Integrierte OLED-Module (IEC 62868-

2-2:2020)
Sources lumineuses à diodes électroluminescentes organiques (OLED) destinées à

l’éclairage général - Sécurité - Partie 2-2: Exigences particulières - Modules OLED

intégrés (IEC 62868-2-2:2020)
Ta slovenski standard je istoveten z: EN IEC 62868-2-2:2021
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN IEC 62868-2-2:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62868-2-2:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 62868-2-2:2022
EUROPEAN STANDARD EN IEC 62868-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 29.140.99
English Version
Organic light emitting diode (OLED) light sources for general
lighting - Safety - Part 2-2: Particular requirements - Integrated
OLED modules
(IEC 62868-2-2:2020)

Sources lumineuses à diodes électroluminescentes Organische Licht emittierende Dioden (OLED) Lichtquellen

organiques (OLED) destinées à l'éclairage général - für die Allgemeinbeleuchtung - Sicherheit - Teil 2-2:

Sécurité - Partie 2-2: Exigences particulières - Modules Besondere Anforderungen - Integrierte OLED-Module

OLED intégrés (IEC 62868-2-2:2020)
(IEC 62868-2-2:2020)

This European Standard was approved by CENELEC on 2020-09-16. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 62868-2-2:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62868-2-2:2022
EN IEC 62868-2-2:2021 (E)
European foreword

The text of document 34A/2193/FDIS, future edition 1 of IEC 62868-2-2, prepared by SC 34A "Electric

light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved

by CENELEC as EN IEC 62868-2-2:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2022-05-05

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2024-11-05

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a Standardization Request given to CENELEC by the

European Commission and the European Free Trade Association.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 62868-2-2:2020 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 62384 NOTE Harmonized as EN IEC 62384
---------------------- Page: 4 ----------------------
SIST EN IEC 62868-2-2:2022
EN IEC 62868-2-2:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),

the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements EN 60598-1 2015
and tests
+ A1 2017 + A1 2018
IEC 60838-2-2 - Miscellaneous lampholders - Part 2-2: EN 60838-2-2 -
Particular requirements - Connectors for
LED-modules
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirements
+ A1 2017 + A1 2021
IEC 62504 - General lighting - Light emitting diode EN 62504 -
(LED) products and related equipment -
Terms and definitions
IEC 62868-1 2020 Organic light emitting diode (OLED) Light EN IEC 62868-1 2021
sources for general lighting - Safety - Part
1: General requirements and tests
IEC/TS 62972 - General lighting - Organic light emitting - -
diode (OLED) products and related
equipment - Terms and definitions
---------------------- Page: 5 ----------------------
SIST EN IEC 62868-2-2:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 62868-2-2:2022
IEC 62868-2-2
Edition 1.0 2020-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE

Organic light emitting diode (OLED) light sources for general lighting – Safety –

Part 2-2: Particular requirements – Integrated OLED modules
Sources lumineuses à diodes électroluminescentes organiques (OLED)
destinées à l’éclairage général – Sécurité –
Partie 2-2: Exigences particulières – Modules OLED intégrés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-8760-6

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 62868-2-2:2022
– 2 – IEC 62868-2-2:2020 © IEC 2020
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

4 General ........................................................................................................................... 6

4.1 General requirements ............................................................................................. 6

4.2 General test requirements ....................................................................................... 6

4.3 Other requirements ................................................................................................. 6

5 Marking ........................................................................................................................... 6

5.1 Contents and location ............................................................................................. 6

5.2 Durability and legibility of marking ........................................................................... 6

6 Construction .................................................................................................................... 6

7 Mechanical hazard .......................................................................................................... 6

8 Fault conditions ............................................................................................................... 7

9 Insulation resistance and electric strength after humidity treatment ................................. 7

9.1 General requirements ............................................................................................. 7

9.2 Insulation resistance ............................................................................................... 7

9.3 Electric strength ...................................................................................................... 7

10 Thermal stress ................................................................................................................. 7

11 Creepage distances and clearances ................................................................................ 8

12 Resistance to heat and fire .............................................................................................. 8

13 Photobiological safety ...................................................................................................... 8

14 Terminals ........................................................................................................................ 8

15 Information for luminaire design ....................................................................................... 8

16 Protection against accidental contact with live parts ........................................................ 8

17 Screws, current-carrying parts and connections ............................................................... 8

18 Resistance to corrosion ................................................................................................... 8

19 Provisions for protective earthing..................................................................................... 8

Annex A (informative) Examples of integrated OLED modules ............................................... 9

Bibliography .......................................................................................................................... 11

Figure A.1 – Independent OLED module for luminaire ............................................................. 9

Figure A.2 – Built-in OLED module for lighting ...................................................................... 10

---------------------- Page: 8 ----------------------
SIST EN IEC 62868-2-2:2022
IEC 62868-2-2:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) LIGHT
SOURCES FOR GENERAL LIGHTING – SAFETY –
Part 2-2: Particular requirements – Integrated OLED modules
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.