iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61083-1:2001

(Main)

Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments

Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments

Applies to digital recorders and digital oscilloscopes used for measurements during tests with high impulse voltages and high impulse currents. Specifies the measuring characteristics and calibrations required to meet the measuring accuracies and procedures given in EN 60-1.

Messgeräte und Software bei Stoßspannungs- und Stoßstromprüfungen - Teil 1: Anforderungen an Messgeräte

Appareils et logiciels utilisés pour les mesures pendant les essais de choc à haute tension - Partie 1: Prescriptions pour les appareils

Applies to digital recorders and digital oscilloscopes used for measurements during tests with high impulse voltages and high impulse currents. Specifies the measuring characteristics and calibrations required to meet the measuring accuracies and procedures given in EN 60-1.

Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001)

General Information

Status
Published
Publication Date
25-Jul-2001
Withdrawal Date
29-Feb-2004
ICS
17.220.20 - Measurement of electrical and magnetic quantities
19.080 - Electrical and electronic testing
Technical Committee
CLC/SR 42 - High-voltage testing techniques
Drafting Committee
IEC/TC 42 - IEC_TC_42
Parallel Committee
IEC/TC 42 - IEC_TC_42
Current Stage
6060 - Document made available - Publishing
Start Date
26-Jul-2001
Completion Date
26-Jul-2001
Ref Project
SIST EN 61083-1:2002 - Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments

Relations

Replaces
EN 61083-1:1993 - Digital recorders for measurements in high-voltage impulse tests - Part 1: Requirements for digital recorders
Effective Date
28-Jan-2023
Replaces
HD 479 S1:1986 - Oscilloscopes and peak voltmeters for impulse tests
Effective Date
28-Jan-2023

Buy Standard

EN 61083-1:2002EN 61083-1:2002
PreviousNext
Standard
EN 61083-1:2002
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 61083-1:2002
 izdaja
STANDARD
oktober 2002
Instruments and software used for measurement in high-voltage impulse tests - Part
1: Requirements for instruments (IEC 61083-1:2001)
ICS 17.220.20 Referenčna številka
SIST EN 61083-1:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61083-1
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 17.220.20; 19.080 Supersedes EN 61083-1:1993 and HD 479 S1:1986
English version
Instruments and software used for measurement
in high-voltage impulse tests
Part 1: Requirements for instruments
(IEC 61083-1:2001)
Appareils et logiciels utilisés pour les Messgeräte und Software bei
mesures pendant les essais de choc Stoßspannungs- und Stoßstromprüfungen
à haute tension Teil 1: Anforderungen an Messgeräte
Partie 1: Prescriptions pour les appareils (IEC 61083-1:2001)
(CEI 61083-1:2001)
This European Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61083-1:2001 E

---------------------- Page: 2 ----------------------

EN 61083-1:2001 - 2 -
Foreword
The text of document 42/164/FDIS, future edition 2 of IEC 61083-1, prepared by IEC TC 42, High-
voltage testing techniques, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61083-1 on 2001-03-01.
This European Standard supersedes EN 61083-1:1993 and HD 479 S1:1986.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C and ZA are normative and annex D is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61083-1:2001 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61083-1:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60060-1 1989 High-voltage test techniques HD 588.1 S1 1991
+ corr. Mar. 1990 Part 1: General definitions and test
requirements
IEC 60060-2 1994 Part 2: Measuring systems EN 60060-2 1994
A1 1996 - -
- - A11 1998
IEC 61000-4-4 1995 Electromagnetic compatibility (EMC) EN 61000-4-4 1995
Part 4-4: Testing and measurement
techniques - Electrical fast
transient/burst immunity test

---------------------- Page: 4 ----------------------

NORME
CEI
INTERNATIONALE IEC
61083-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-06
Appareils et logiciels utilisés pour les mesures
pendant les essais de choc à haute tension –
Partie 1:
Prescriptions pou
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61083-3:2021(Main)
Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
SIST EN IEC 61083-3:2021

IEC 61083-3:2020 is applicable to digital recording instruments used for measurements during tests with high alternating and direct voltages and currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in the relevant IEC standards (e.g. IEC 60060-1, IEC 60060-2, IEC 60060-3, IEC 62475, IEC 61180). This document is applicable to those digital recording instruments that will be designed and type tested according to this document. This document • defines performance requirements for digital recording instruments used during tests with alternating voltages and currents (AC) or direct voltages and currents (DC); • specifies the necessary requirements for such instruments to ensure their suitability for use under the relevant standards; • establishes the tests and procedures necessary to demonstrate their compliance; • defines the terms related to digital recording instruments with recording function and access to raw data. Examples of relevant alternating and direct voltages and currents to be measured are listed in Annex D. This International Standard has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60270:2001/A1:2016(Amendment)
High-voltage test techniques - Partial discharge measurements
SIST EN 60270:2002/A1:2016

Applicable to the measurement of partial discharges which occur in electrical apparatus, components or systems when tested with alternating voltage up to 400 Hz or with direct voltage.

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61083-2:2013(Main)
Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
SIST EN 61083-2:2013

IEC 61083-2:2013 applies to software used for evaluation of impulse parameters from recorded impulse voltages and currents. It provides test waveforms and reference values for the software required to meet the measuring uncertainties and procedures specified in IEC 60060-1, IEC 60060-2, IEC 60060-3 and IEC 62475. Hardware with built-in firmware that cannot accept external numerical input data is not covered by this standard. The object of this standard is to establish the tests which are necessary to show that the performance of the software complies with the requirements of the relevant IEC standards, define the terms specifically related to digital processing, specify reference values and the acceptance limits for the reference impulses, specify the requirements for the record of performance and define the methods to assess the contribution of software to the measurement uncertainty. This second edition cancels and replaces the first edition published in 1996 and constitutes a technical revision. The main changes with respect to the previous edition are: - the test data generator software has been updated, - the number of reference impulse waveforms included in the test data generator has been significantly increased, - all reference values have been recalculated according to new definitions in IEC 60060-1 and IEC 62475 and - methods for estimating the uncertainty of parameter evaluation have been introduced and are in line with the procedure introduced in IEC 60060-2. Keywords: High voltage, High current, Impulse voltage, Impulse current.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60060-2:2011(Main)
High-voltage test techniques - Part 2: Measuring systems
SIST EN 60060-2:2011

IEC 60060-2:2010 is applicable to complete measuring systems, and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages as specified in IEC 60060-1. For measurements during on-site tests see IEC 60060-3. The limits on uncertainties of measurements stated in this standard apply to test levels stated in IEC 60071-1:2006. The principles of this standard apply also to higher levels but the uncertainty may be greater. This standard also defines the terms used, methods to estimate the uncertainties of high-voltage measurements, states the requirements which the measuring systems shall meet, describes the methods for approving a measuring system and checking its components and describes the procedures by which the user shall show that a measuring system meets the requirements of this standard, including the limits set for the uncertainty of measurement. This third edition cancels and replaces the second edition, published in 1994, and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - The general layout and text was updated and improved to make the standard easier to use. - The standard was revised to align it with IEC 60060-1. - The treatment of measurement uncertainty estimation has been expanded.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60060-3:2006(Main)
High voltage test techniques - Part 3: Definitions and requirements for on-site tests
SIST EN 60060-3:2006

Applicable to the following on-site test voltages and in service stresses, which are in relation to IEC 60060-1: direct voltage;alternating voltage; lightning impulse voltage of aperiodic or oscillating shape: switching impulse voltage of aperiodic or oscillating shape.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60270:2001(Main)
High-voltage test techniques - Partial discharge measurements
SIST EN 60270:2002

Applies to the measurement of localized electrical discharges in insulating media, restricted to only a part of the dielectric under test and only partially bridging the insulation between conductors.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60270:2023(Main)
High-voltage test techniques - Charge-based measurement of partial discharges
oSIST prEN IEC 60270:2023
  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60060-2:2023(Main)
High-voltage test techniques - Part 2: Measuring systems
oSIST prEN IEC 60060-2:2023
  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61326-2-4:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
SIST EN IEC 61326-2-4:2021

IEC 61326-2-4:2020 is available as IEC 61326-2-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-4:2020 specifies more detailed test configurations, operational conditions and performance criteria than IEC 61326-1 for equipment for - insulation monitoring according to IEC 61557-8; - insulation fault location according to IEC 61557-9. This applies to insulation monitoring devices and for equipment for insulation fault location systems permanently or semi-permanently connected to the distribution system.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61326-1:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
SIST EN IEC 61326-1:2021

IEC 61326-1:2020 is available as IEC 61326-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326:2020 specifies requirements for immunity and emissions regarding electro¬magnetic compatibility (EMC) for electrical equipment, operating from a supply or battery of less than 1 000 V AC or 1 500 V DC or from the circuit being measured. Equipment intended for professional, industrial-process, industrial-manufacturing and educational use is covered by this part. It includes equipment and computing devices for - measurement and test; - control; - LABORATORY use; - accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day