EN 55016-1-1:2007
(Main)Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Superseded by EN 55016-1-1:2010
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messgeräte
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Appareils de mesure
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti – 1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti – Merilne naprave (CISPR 16-1-1:2006/A1:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2007
1DGRPHãþD
SIST EN 55016-1-1:2005
SIST EN 55016-1-1:2005/A1:2005
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in
odpornosti – 1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti –
Merilne naprave (CISPR 16-1-1:2006/A1:2006)
Specification for radio disturbance and immunity measuring apparatus and methods --
Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Messgeräte
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Appareils de mesure
Ta slovenski standard je istoveten z: EN 55016-1-1:2007
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 55016-1-1
NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM
ICS 33.100.10 Supersedes EN 55016-1-1:2004 + A1:2005
English version
Specification for radio disturbance
and immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity measuring apparatus -
Measuring apparatus
(CISPR 16-1-1:2006)
Spécifications des méthodes Anforderungen an Geräte
et des appareils de mesure und Einrichtungen sowie Festlegung
des perturbations radioélectriques der Verfahren zur Messung
et de l'immunité aux perturbations der hochfrequenten Störaussendung
radioélectriques - (Funkstörungen) und Störfestigkeit -
Partie 1-1: Appareils de mesure Teil 1-1: Geräte und Einrichtungen
des perturbations radioélectriques zur Messung der hochfrequenten
et de l'immunité aux perturbations Störaussendung (Funkstörungen)
radioélectriques - und Störfestigkeit -
Appareils de mesure Messgeräte
(CISPR 16-1-1:2006) (CISPR 16-1-1:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55016-1-1:2007 E
Foreword
The text of document CISPR/A/642/FDIS, future edition 2 of CISPR 16-1-1, prepared by CISPR SC A,
Radio-interference measurements and statistical methods, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 55016-1-1 on 2006-11-01.
This European Standard supersedes EN 55016-1-1:2004 + A1:2005.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-10-01
– latest date by which the national standards conflicting
(dow) 2009-11-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard CISPR 16-1-1:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
CISPR 16-1-2 NOTE Harmonized as EN 55016-1-2:2004 (not modified).
CISPR 16-1-3 NOTE Harmonized as EN 55016-1-3:2006 (not modified).
CISPR 16-1-4 NOTE Harmonized as EN 55016-1-4:2004 (not modified).
CISPR 16-1-5 NOTE Harmonized as EN 55016-1-5:2004 (not modified).
CISPR 16-2-1 NOTE Harmonized as EN 55016-2-1:2004 (not modified).
CISPR 16-2-2 NOTE Harmonized as EN 55016-2-2:2004 (not modified).
CISPR 16-2-3 NOTE Harmonized as EN 55016-2-3:2004 (not modified).
CISPR 16-2-4 NOTE Harmonized as EN 55016-2-4:2004 (not modified).
CISPR 16-4-2 NOTE Harmonized as EN 55016-4-2:2004 (not modified).
__________
- 3 - EN 55016-1-1:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-161 1990 International Electrotechnical Vocabulary - -
+ A1 1997 (IEV) - - -
+ A2 1998 Chapter 161: Electromagnetic compatibility - -
CISPR 11 (mod) 2003 Industrial scientific and medical (ISM) EN 55011 2007
radio-frequency equipment - Electromagnetic
disturbance characteristics - Limits and
methods of measurement
CISPR 14-1 2005 Electromagnetic compatibility - Requirements EN 55014-1 2006
for household appliances, electric tools and
similar apparatus -
Part 1: Emission
CISPR 16-3 2003 Specification for radio disturbance and - -
immunity measuring apparatus and methods -
Part 3: CISPR technical reports
BIPM/IEC/IFCC/ISO/ 1993 International vocabulary of basic and general - -
IUPAC/IUPAP/OIML terms in metrology (VIM)
INTERNATIONAL
CISPR
ELECTROTECHNICAL
16-1-1
COMMISSION
Edition 2.1
2006-11
Edition 2:2006 consolidated with amendment 1:2006
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
Specification for radio disturbance and immunity
measuring apparatus and methods –
Part 1-1:
Radio disturbance and immunity measuring
apparatus – Measuring apparatus
© IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale CL
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
CISPR 16-1-1 © IEC:2006+A1:2006 – 3 –
CONTENTS
FOREWORD.7
1 Scope.11
2 Normative references .11
3 Terms and definitions .13
4 Quasi-peak measuring receivers for the frequency range 9 kHz to 1 000 MHz .17
5 Measuring receivers with peak detector for the frequency range 9 kHz to 18 GHz .41
6 Measuring receivers with average detector
for the frequency range 9 kHz to 18 GHz.49
7 Measuring receivers with rms detector for the frequency range 9 kHz to 18 GHz .57
8 Measuring receivers for the frequency range 1 GHz to 18 GHz with amplitude
probability distribution (APD) measuring function.63
9 Disturbance analyzers .65
Annex A (normative) Determination of response to repeated pulses of quasi-peak and
r.m.s. measuring receivers (subclauses 3.2, 4.4.2, 7.2.2 and 7.4.1) .83
Annex B (normative) Determination of pulse generator spectrum
(subclauses 4.4, 5.4, 6.4, 7.4).93
Annex C (normative) Accurate measurements of the output of nanosecond pulse
generators (subclauses 4.4, 5.4, 6.4, 7.4) .97
Annex D (normative) Influence of the quasi-peak measuring receiver characteristics
on its pulse response (subclause 4.4.2) .101
Annex E (normative) Response of average and peak measuring receivers
(subclause 6.2.1) .103
Annex F (normative) Performance check of the exceptions from the definitions
of a click according to 4.2.3 of CISPR 14-1.121
Annex G (informative) Rationale for the specifications of the APD measuring function .135
Bibliography.141
Figure 1 – Pulse response curves .25
Figure 2 – Limits of overall selectivity .33
Figure 3 – Arrangement for testing intermodulation effects .35
Figure 4 – Block diagram of an average detector. .55
Figure 5 – Response of the meter simulating network to an intermittent narrowband
signal.55
Figure 6 – Example of a disturbance analyzer.69
Figure 7 – A graphical presentation of test signals used in the test of the analyzer for
the performance check against the definition of a click according to Table 14 .71
Figure 8 – Limits for the overall selectivity – pass band (Band E).47
CISPR 16-1-1 © IEC:2006+A1:2006 – 5 –
Figure E.1 – Correction factor for estimating the ratio B /B for other tuned circuits.105
imp 6
Figure E.2 – Pulse rectification coefficient P .109
Figure E.3 – Example (spectrum) of a pulse-modulated signal
with a pulse width of 200 ns.113
Figure E.4 – Pulse-modulated RF signal applied to a measuring receiver .115
Figure E.5 – Filtering with a B much smaller than the prf .115
imp
Figure E.6– Filtering with a B much wider than the prf.115
imp
Figure E.7 – Calculation of the impulse bandwidth .117
Figure E.8 – Example of a normalized linear selectivity function. .119
Figure F.1 – A graphical presentation of the test signals used for the performance
check of the analyzer with the additional requirements according to Table F.1.133
Figure G.1 – Block diagram of APD measurement circuit without A/D converter.137
Figure G.2 – Block diagram of APD measurement circuit with A/D converter.137
Figure G.3 – Example of display of APD measurement .139
Table 1 – Fundamental characteristics of quasi-peak receivers.17
Table 2 – Test pulse characteristics for quasi-peak measuring receivers .19
Table 3 – Pulse response of quasi-peak receivers .27
Table 4 – Bandwidth characteristics for inter-modulation test of quasi-peak measuring
receivers.37
Table 5 – VSWR requirements for receiver input impedance.41
Table 6 – Bandwidth requirements .41
Table 7 – Relative pulse response of peak and quasi-peak measuring receivers for the
same bandwidth (frequency range 9 kHz to 1 000 MHz).45
Table 8 – Bandwidth requirements .49
Table 9 – Relative pulse response of average and quasi-peak measuring receivers for
the same bandwidth (frequency range 9 kHz to 1 GHz).51
Table 10 – Maximum readi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.