EN 62341-5:2009

Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods

IEC 62341-5:2009 defines testing methods for evaluating environmental endurance of organic light emitting diode display modules (OLED display modules) for use and storage under the assumed usage environment.

Anzeigen mit organischen lichtemittierenden Dioden - Teil 5: Verfahren zur Umweltprüfung

Afficheurs à diodes électroluminescentes organiques (DELO) - Partie 5: Méthodes d'essai d'environnement

La CEI 62341-5:2009 définit des méthodes d'essai pour évaluer l'endurance aux conditions d'environnement du module d'affichage à diodes électroluminescentes organiques (modules d'affichage DELO) pour utilisation et stockage dans l'environnement d'utilisation prévu.

Prikazovalniki z organskimi svetlečimi diodami - 5. del: Metode za okoljska preskušanja (IEC 62341-5:2009)

Ta del IC 62341 opredeljuje metode preskušanja za ocenjevanje okoljske vzdržljivosti prikazovalnikov z organskimi svetlečimi diodami (OLED prikazovalni moduli) za uporabo in hrambo v okviru pričakovanega okolja uporabe.

General Information

• Status: Published
• Publication Date: 17-Dec-2009
• Withdrawal Date: 30-Nov-2012
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 110 - Flat panel display devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Parallel Committee: IEC/TC 110 - IEC_TC_110
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Dec-2009
• Completion Date: 18-Dec-2009
• Ref Project: SIST EN 62341-5:2010 - Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods (IEC 62341-5:2009)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2010
3ULND]RYDOQLNL]RUJDQVNLPLVYHWOHþLPLGLRGDPLGHO0HWRGH]DRNROMVND
SUHVNXãDQMD,(&
Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
(IEC 62341-5:2009)
Anzeigen mit organischen lichtemittierenden Dioden - Teil 5: Verfahren zur
Umweltprüfung (IEC 62341-5:2009)
Afficheurs à diodes électroluminescentes organiques(OLED, Organic Light Emitting
Diode) - Partie 5: Méthodes d'essai d'environnement (CEI 62341-5:2009)
Ta slovenski standard je istoveten z: EN 62341-5:2009
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SLOVENSKI STANDARD
01-februar-2010
3ULND]RYDOQLNL]RUJDQVNLPLVYHWOHþLPLGLRGDPLGHO0HWRGH]DRNROMVND
SUHVNXãDQMD,(&
Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
(IEC 62341-5:2009)
Anzeigen mit organischen lichtemittierenden Dioden - Teil 5: Verfahren zur
Umweltprüfung (IEC 62341-5:2009)
Afficheurs à diodes électroluminescentes organiques(OLED, Organic Light Emitting
Diode) - Partie 5: Méthodes d'essai d'environnement (CEI 62341-5:2009)
Ta slovenski standard je istoveten z: EN 62341-5:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62341-5
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 31.260
English version
Organic Light Emitting Diode (OLED) displays -
Part 5: Environmental testing methods
(IEC 62341-5:2009)
Afficheurs à diodes électroluminescentes Anzeigen mit organischen
organiques (DELO) - lichtemittierenden Dioden -
Partie 5: Méthodes d'essai Teil 5: Verfahren zur Umweltprüfung
d'environnement (IEC 62341-5:2009)
(CEI 62341-5:2009)
This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62341-5:2009 E
Foreword
The text of document 110/192A/FDIS, future edition 1 of IEC 62341-5, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 62341-5 on 2009-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62341-5:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62341-5:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050 Series International electrotechnical vocabulary - -

1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-1 2007 Environmental testing - EN 60068-2-1 2007
Part 2-1: Tests - Test A: Cold

IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat

2) 3)
IEC 60068-2-5 - Environmental testing - EN 60068-2-5 1999
Part 2: Tests - Test Sa: Simulated solar
radiation at ground level
2) 3)
IEC 60068-2-13 - Environmental testing - EN 60068-2-13 1999
Part 2: Tests - Test M: Low air pressure

2) 3)
IEC 60068-2-30 - Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60068-2-78 2001 Environmental testing - EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
2) 3)
IEC 61000-4-2 - Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61747-5 1998 Liquid crystal and solid-state display devices - EN 61747-5 1998
Part 5: Environmental, endurance and
mechanical test methods
2) 3)
IEC 62341-1-2 - Organic light emitting diode displays - EN 62341-1-2 2009
Part 1-2: Terminology and letter symbols

IEC 62341-6-1 2009 Organic light emitting diode (OLED) displays - - -
Part 6-1: Measuring methods of optical and
electro-optical parameters
1)
EN 60068-1 includes A1:1992 to IEC 60068-1 + corr. October 1988.
2)
Undated reference.
3)
Valid edition at date of issue.

IEC 62341-5 ®
Edition 1.0 2009-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Organic light emitting diode (OLED) displays –
Part 5: Environmental testing methods

Afficheurs à diodes électroluminescentes organiques (DELO) –
Partie 5: Méthodes d’essai d’environnement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
N
CODE PRIX
ICS 31.260 ISBN 2-8318-1067-9
– 2 – 62341-5 © IEC:2009
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms, definitions and letter symbols .6
4 Structure of testing equipment.6
5 Standard conditions.6
5.1 Standard reference atmosphere .6
5.2 Standard atmospheric conditions for reference measurements and tests .6
5.3 Standard atmospheric conditions for measurements and tests.7
5.4 Standard atmospheric conditions for assisted drying .7
5.5 Recovery conditions .7
5.6 Standard measuring conditions .7
5.7 Operating conditions .7
5.8 Standard OLED display module test configuration .7
6 Measurements and analysis .7
7 Environmental tests.8
7.1 General .8
7.2 Storage at high temperature .8
7.3 Storage at low temperature .9
7.4 Damp heat, steady state, non-operational .9
7.5 Operation at high temperature.10
7.6 Operation at low temperature .10
7.7 Damp heat, steady state, operational .11
7.8 Damp heat, cyclic.12
7.9 Thermal shock.12
7.10 (Simulated) Sunlight exposure.13
7.11 Low air pressure.13
7.12 ESD .15

Table 1 – Standard conditions for reference measurements and tests .6
Table 2 – Application and luminance (examples) .7

62341-5 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS –

Part 5: Environmental testing methods

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
...