EN 62341-1-1:2009

Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications

IEC 62341-1-1:2009 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ System and establishes general rules for methods of electrical and optical measurements, environmental and mechanical tests and endurance tests.

Anzeigen mit organischen Leuchtdioden - Teil 1-1: Fachgrundspezifikation

Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 1-1: Spécifications génériques

La CEI 62341-1-1:2009 est une spécification générique pour les afficheurs à diodes électroluminescentes organiques (OLED; en anglais Organic Light Emitting Diode). Elle définit les procédures générales pour l'assurance de la qualité à utiliser dans le système IECQ-CECC et établit des règles générales pour les méthodes de mesures électriques et optiques, les essais d'environnement et mécaniques et les essais d'endurance.

Prikazovalniki z organskimi svetlečimi diodami (OLED) - 1-1. del: Rodovna specifikacija (IEC 62341-1-1:2009)

Ta del IEC 62341 je rodovna specifikacija za prikazovalnike z organskimi svetlečimi diodami (OLED). Opredeljuje splošne postopke za ocenjevanje kakovosti, ki se uporabljajo v IECQ-CECC sistemu in vzpostavlja splošna pravila za metode električnih in optičnih merjenj, okoljskih in mehanskih preskušanj in preskuse vzdržljivosti.

General Information

• Status: Published
• Publication Date: 17-Dec-2009
• Withdrawal Date: 30-Nov-2012
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 110 - Flat panel display devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Parallel Committee: IEC/TC 110 - IEC_TC_110
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Dec-2009
• Completion Date: 18-Dec-2009
• Ref Project: SIST EN 62341-1-1:2010 - Organic Light Emitting Diode (OLED) displays - Part 1-1: Generic specifications (IEC 62341-1-1:2009)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2010
3ULND]RYDOQLNL]RUJDQVNLPLVYHWOHþLPLGLRGDPL2/('GHO5RGRYQD
VSHFLILNDFLMD,(&
Organic Light Emitting Diode (OLED) displays - Part 1-1: Generic specifications (IEC
62341-1-1:2009)
Anzeigen mit organischen Leuchtdioden - Teil 1-1: Fachgrundspezifikation (IEC 62341-1-
1:2009)
Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 1-1: Spécifications
génériques (CEI 62341-1-1:2009)
Ta slovenski standard je istoveten z: EN 62341-1-1:2009
ICS:
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62341-1-1
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 31.260
English version
Organic light emitting diode (OLED) displays -
Part 1-1: Generic specifications
(IEC 62341-1-1:2009)
Afficheurs à diodes électroluminescentes Anzeigen mit organischen Leuchtdioden -
organiques (OLED) - Teil 1-1: Fachgrundspezifikation
Partie 1-1: Spécifications génériques (IEC 62341-1-1:2009)
(CEI 62341-1-1:2009)
This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62341-1-1:2009 E
Foreword
The text of document 110/168/FDIS, future edition 1 of IEC 62341-1-1, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 62341-1-1 on 2009-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62341-1-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60027-1 NOTE  Harmonized as EN 60027-1:2006 (not modified).
IEC 60027-4 NOTE  Harmonized as EN 60027-4:2007 (not modified).
ISO 1101 NOTE  Harmonized as EN ISO 1101:2005 (not modified).
__________
- 3 - EN 62341-1-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60410 1973 Sampling plans and procedures - -
for inspection by attributes
IEC 60747-1 2006 Semiconductor devices - - -
Part 1: General
1) 2)
IEC 62341-1-2 - Organic light emitting diode displays - EN 62341-1-2 2009
Part 1-2: Terminology and letter symbols

IEC 62341-5 2009 Organic Light Emitting Diode (OLED) EN 62341-5 2009
displays -
Part 5: Environmental testing methods

1)
IEC 62341-6-1 - Organic light emitting diode (OLED) - -
displays -
Part 6-1: Measuring methods of optical and
electro-optical parameters
IEC QC 001002 Series IEC quality assessment system for electronic - -
components (IECQ) - Rules of procedure

ISO 2859 Series Sampling procedures for inspection - -
by attributes
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62341-1-1 ®
Edition 1.0 2009-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Organic light emitting diode (OLED) displays –
Part 1-1: Generic specifications

Afficheurs à diodes électroluminescentes organiques (OLED) –
Partie 1-1: Spécifications génériques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 31.260 ISBN 2-8318-1036-1
– 2 – 62341-1-1 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms, definitions, units and symbols .6
4 Technical aspects.6
4.1 Order of precedence .6
4.2 Standard atmospheric conditions.7
4.3 Marking .7
4.3.1 Device identification .7
4.3.2 Device traceability .7
4.3.3 Packing .7
4.4 Categories of assessed quality.7
4.5 Screening.8
4.6 Handling.8
5 Quality assessment procedures.8
5.1 Eligibility for qualification approval .8
5.2 Primary stage of manufacture.8
5.3 Commercially confidential information .8
5.4 Formation of inspection lots.9
5.5 Structurally similar devices.9
5.6 Subcontracting .9
5.7 Validity of release.9
6 Quality approval procedure.9
6.1 Granting of qualification approval .9
6.2 Quality conformance inspection requirements.9
6.2.1 Division into groups and subgroups .9
6.2.2 Quality conformance Inspection requirements.11
6.2.3 Supplementary procedure for reduced inspection .12
6.2.4 Sampling requirements for small lots .12
6.2.5 Certified records of released lots (CRRL) .12
6.2.6 Delivery of devices subjected to destructive or non-destructive test.12
6.2.7 Delayed deliveries .12
6.2.8 Supplementary procedure for deliveries.12
6.3 Statistical sampling procedures .13
6.3.1 AQL sampling plans.13
6.3.2 LTPD sampling plans.13
6.4 Endurance tests .13
6.4.1 General .13
6.4.2 Endurance tests where the failure rate is specified .13
6.5 Accelerated test procedures .14
7 Capability approval procedure .14
8 Test and measurement procedures.15
8.1 Standard environmental conditions.15
8.1.1 Dark room condition .15
8.1.2 Standard setup condition .15
8.1.3 Standard atmospheric conditions for measurements .15

62341-1-1 © IEC:2009 – 3 –
8.2 Physical examination.15
8.2.1 Visual examination .15
8.2.2 Dimensions .15
8.2.3 Weight.15
8.2.4 Permanence of marking.15
8.3 Electrical and optical measurement .15
8.3.1 General conditions and precautions.16
8.4 Environmental test .16
8.5 Endurance test .16
Annex A (informative) Lot tolerance percentage defective (LTPD) sampling plans .17
Bibliography.22

Table A.1 – LTPD sampling plans .19
Table A.2 – Hypergeometric sampling plans for small lot sizes of 200 or less .20
Table A.3 – AQL and LTPD sampling plans.21

– 4 – 62341-1-1 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS –

Part 1-1: Generic specifications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical co
...