EN 61988-1:2011
(Main)Plasma display panels - Part 1: Terminology and letter symbols
Plasma display panels - Part 1: Terminology and letter symbols
IEC 61988-1:2011 gives the preferred terms, their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared in different countries. Guidance on the technology is provided in the annexes. This second edition cancels and replaces the first edition published in 2003, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: Additional terms were added in Clause 3.
Plasmabildschirme - Teil 1: Terminologie und Buchstabensymbole
Panneaux d'affichage à plasma - Partie 1: Terminologie et symboles littéraux
La CEI 61988-1:2011 donne les termes à utiliser, de préférence, leurs définitions et leurs symboles pour les panneaux d'affichage couleur à plasma à tension alternative (AC Plasma Display Panels ou AC PDP); le but recherché est d'encourager l'utilisation de ces mêmes termes lorsque des publications sont préparées dans différents pays. Des lignes directrices concernant la technologie sont données dans les annexes. Cette deuxième édition annule et remplace la première édition parue en 2003. Elle constitue une révision technique. Les principales modifications techniques par rapport à l'édition précédente sont les suivantes: Des termes supplémentaires ont été ajoutés à l'Article 3.
Prikazovalniki s plazmo - 1. del: Izrazje in črkovni simboli
Ta del IEC 61988 podaja prednostne izraze, njihove definicije in simbole za barvne AC-prikazovalnike s plazmo (AC PDP); njihov cilj je uporaba iste terminologije, ko se publikacije pripravljajo v različnih državah. Vodilo o tehnologiji navajajo dodatki.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2011
3ULND]RYDOQLNLVSOD]PRGHO ,]UD]MHLQþUNRYQLVLPEROL
Plasma Display Panels - Part 1: Terminology and letter symbols
Plasmabildschirme - Teil 1: Terminologie und Buchstabensymbole
Panneaux d'affichage à plasma - Partie 1: Terminologie et symboles littéraux
Ta slovenski standard je istoveten z: EN 61988-1:2011
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61988-1
NORME EUROPÉENNE
September 2011
EUROPÄISCHE NORM
ICS 31.260 Supersedes EN 61988-1:2003
English version
Plasma display panels -
Part 1: Terminology and letter symbols
(IEC 61988-1:2011)
Panneaux d'affichage à plasma - Plasmabildschirme -
Partie 1: Terminologie et symboles Teil 1: Terminologie und
littéraux Buchstabensymbole
(CEI 61988-1:2011) (IEC 61988-1:2011)
This European Standard was approved by CENELEC on 2011-08-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-1:2011 E
Foreword
The text of document 110/236/CDV, future edition 2 of IEC 61988-1, prepared by IEC/TC 110, Flat panel
display devices, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
This document supersedes EN 61988-1:2003.
– Additional terms were added in Clause 3.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2012-05-30
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with the (dow) 2014-08-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
__________
Endorsement notice
The text of the International Standard IEC 61988-1:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61988-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 1)
IEC 61988-2-1 201X Plasma display panels - EN 61988-2-1 201X
Part 2-1: Measuring methods - Optical and
optoelectrical
1)
At draft stage.
IEC 61988-1 ®
Edition 2.0 2011-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plasma display panels –
Part 1: Terminology and letter symbols
Panneaux d'affichage à plasma –
Partie 1: Terminologie et symboles littéraux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 31.260 ISBN 978-2-88912-591-3
– 2 – 61988-1 IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols . 31
4.1 General . 31
4.2 Symbol list by term name . 31
4.3 Symbol list by symbol . 33
Annex A (informative) Description of the technology . 35
Annex B (informative) Relationship between voltage terms and discharge
characteristics . 46
Annex C (informative) Gaps . 47
Annex D (informative) Manufacturing . 48
Annex E (informative) Interconnect pad . 51
Bibliography . 52
Figure A.1 – Principal structures and discharge characteristics of a DC PDP cell and
an AC PDP cell . 35
Figure A.2 – Discharge characteristics of a cell (single cell static characteristics) . 37
Figure A.3 – Static characteristics of cells in a panel or a group of cells . 38
Figure A.4 – Write waveform components . 39
Figure A.5 – Operation of a two-electrode type AC PDP . 40
Figure A.6 – Relation between margins and applied voltages . 41
Figure A.7 – Structure of a three-electrode type, surface discharge colour AC PDP . 42
Figure A.8 – Address-, display-period separation method . 43
Figure A.9 – A driving waveform for ADS method applied to a three-electrode . 44
Figure A.10 – Address while display method . 45
Figure C.1 – Gaps (sustain gap, plate gap and interpixel gap) in a three-electrode type
AC PDP . 47
Figure D.1 – PDP manufacturing flow chart . 49
Figure E.1 – Interconnect pad group . 51
Figure E.2 – Dimensions of interconnect pads . 51
Table B.1 – Relation between static, dynamic and operating discharge characteristics
in a cell, a panel or a group of cells . 46
61988-1 IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
PLASMA DISPLAY PANELS –
Part 1: Terminology and letter symbols
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61988-1 has been prepared by IEC technical committee 110: Flat
panel display devices.
This second edition cancels and replaces the first edition published in 2003, and constitutes a
technical revision. The main technical changes with regard to the previous edition are as
follows:
– Additional terms were added in Clause 3.
The text of this standard is based on the following documents:
CDV Report on voting
110/236/CDV 110/286/RVC
Full information on the voting for the approval on this standard can be found in the report on
voting indicated in the above table.
– 4 – 61988-1 IEC:2011
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61988 series, under the general title Plasma display panels,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61988-1 IEC:2011 – 5 –
PLASMA DISPLAY PANELS –
Part 1: Terminology and letter symbols
1 Scope
This part of IEC 61988 gives the preferred terms, their definitions and symbols for colour
AC plasma display panels (AC PDP); with the object of using the same terminology when
publications are prepared in different countries. Guidance on the technology is provided
in the annexes.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the refer
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.