EN 61988-5:2009

Plasma display panels - Part 5: Generic specification

IEC 61988-5:2009 is a generic specification for plasma display panels specifies general procedures for quality assessment to be used in the IECQ-CECC system and establishes general principles for describing and testing of electrical, optical, mechanical and environmental characteristics.

Plasmabildschirme - Teil 5: Fachgrundspezifikation

Panneaux d'affichage à plasma - Partie 5: Spécification générique

La CEI 61988-5:2009 est une spécification générique, relative aux panneaux d'affichage à plasma, définit les procédures générales pour l'assurance de la qualité à utiliser dans le système IECQ-CECC et établit des principes généraux pour décrire et mesurer les caractéristiques électriques, optiques, mécaniques et de tenue à l'environnement.

Plošče s plazemskimi prikazovalniki - 5. del: Rodovna specifikacija (IEC 61988-5:2009)

Ta rodovna specifikacija za plošče s plazemskimi prikazovalniki podaja splošne postopke za ocenjevanje kakovosti, ki se uporabljajo v IECQ-CECC sistemu (IEC sistem za ugotavljanje kakovosti elektronskih elementov - CENELEC združenje elektronskih komponent), ter vzpostavlja splošna načela za opisovanje in preskušanje električnih, optičnih, mehanskih in okoljskih značilnosti.

General Information

• Status: Published
• Publication Date: 17-Dec-2009
• Withdrawal Date: 30-Nov-2012
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 110 - Flat panel display devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Parallel Committee: IEC/TC 110 - IEC_TC_110
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Dec-2009
• Completion Date: 18-Dec-2009
• Ref Project: SIST EN 61988-5:2010 - Plasma display panels - Part 5: Generic specification (IEC 61988-5:2009)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2010
3ORãþHVSOD]HPVNLPLSULND]RYDOQLNLGHO5RGRYQDVSHFLILNDFLMD,(&

Plasma display panels - Part 5: Generic specification (IEC 61988-5:2009)
Plasmabildschirme - Teil 5: Fachgrundspezifikation (IEC 61988-5:2009)
Panneaux d'affichage à plasma - Partie 5: Spécifications génériques (IEC 61988-5:2009)
Ta slovenski standard je istoveten z: EN 61988-5:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61988-5
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 31.260
English version
Plasma display panels -
Part 5: Generic specification
(IEC 61988-5:2009)
Panneaux d'affichage à plasma -  Plasmabildschirme -
Partie 5: Spécification générique Teil 5: Fachgrundspezifikation
(CEI 61988-5:2009) (IEC 61988-5:2009)

This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-5:2009 E
Foreword
The text of document 110/182/FDIS, future edition 1 of IEC 61988-5, prepared by IEC TC 110, Flat panel
display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61988-5 on 2009-12-01
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61988-5:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61988-5:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050 Series International electrotechnical vocabulary - -

IEC 60410 1973 Sampling plans and procedures for inspection - -
by attributes
IEC 60617 Graphical symbols for diagrams - -
Data-
base
1)
IEC 60747-1 - Semiconductor devices - - -
Part 1: General
1) 2)
IEC 61988-1 - Plasma display panels - EN 61988-1 2003
Part 1: Terminology and letter symbols

1) 2)
IEC 61988-2-1 - Plasma display panels - EN 61988-2-1 2002
Part 2-1: Measuring methods - Optical

1) 2)
IEC 61988-2-2 - Plasma display panels - EN 61988-2-2 2003
Part 2-2: Measuring methods - Optoelectrical

1) 2)
IEC 61988-3-1 - Plasma display panels - EN 61988-3-1 2005
Part 3-1: Mechanical interface

1) 2)
IEC 61988-4 - Plasma display Panels - EN 61988-4 2007
Part 4: Climatic and mechanical testing
methods
1)
IECQ 01 - IEC Quality Assessment System for - -
Electronic Components (IECQ) - Basic Rules

IEC QC 001002 Series IEC quality assessment system for electronic - -
components (IECQ) - Rules of procedure

ISO 1000 1992 SI units and recommendations for the use of - -
their multiples and of certain other units

1)
ISO 2859-1 - Sampling procedures for inspection by - -
attributes -
Part 1: Sampling schemes indexed by
acceptance quality limit (AQL) for lot-by-lot
inspection
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1)
ISO 2859-10 - Sampling procedures for inspection by - -
attributes -
Part 10: Introduction to the ISO 2859 series of
standards for sampling for inspection by
attributes
1)
ISO 3534-2 - Statistics - Vocabulary and symbols - - -
Part 2: Applied statistics
IEC 61988-5 ®
Edition 1.0 2009-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plasma display panels –
Part 5: Generic specification
Panneaux d’affichage à plasma –
Partie 5: Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 31.260 ISBN 2-8318-1071-1
– 2 – 61988-5 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Order of precedence.7
4 Terminology, units, symbols and abbreviations.7
5 Standard environmental conditions.8
6 Marking .8
6.1 Device identification code.8
6.2 Device traceability code .8
6.3 Packing .8
7 Quality assessment procedures.8
7.1 General .8
7.2 Eligibility for qualification and/or capability approval.8
7.3 Primary stage of manufacture.8
7.4 Commercially confidential information .9
7.5 Formation of inspection lots.9
7.6 Structurally similar devices.9
7.7 Subcontracting .9
7.8 Incorporated components .9
7.9 Validity of release.9
8 Qualification approval procedure .9
8.1 Qualification approval testing .9
8.2 Granting of qualification approval .9
8.3 Quality conformance inspection requirements.9
8.3.1 General .9
8.3.2 Division into groups and subgroups .10
8.3.3 Inspection requirements .12
8.3.4 Supplementary procedure for reduced inspection .12
8.3.5 Sampling requirements for small lots .13
8.3.6 Certified records of released lots (CRRL) .13
8.3.7 Delivery of device subjected to destructive or non-destructive tests.13
8.3.8 Delayed deliveries .13
8.3.9 Supplementary procedure for deliveries.13
8.4 Statistical sampling procedures .13
8.4.1 AQL sampling plans.14
8.4.2 LTPD sampling plans.14
8.5 Endurance tests .14
8.6 Endurance tests where the failure rate is specified.14
8.6.1 General .14
8.6.2 Selection of samples .14
8.6.3 Failure.14
8.6.4 Endurance test time and sample size .14
8.6.5 Procedure to be used when the number of observed failures exceeds
the acceptance number .14
8.7 Accelerated test procedures .15
9 Capability approval procedures .15

61988-5 © IEC:2009 – 3 –
10 Test and measurement procedures.15
10.1 Standard conditions and general precautions .15
10.1.1 Standard conditions.15
10.1.2 General precautions .15
10.1.3 Precision of measurements .16
10.2 Physical examination.16
10.2.1 Visual examination .16
10.2.2 Dimensions .16
10.3 Electrical and optical measurements .16
10.4 Climatic and mechanical tests .16
10.5 Alternative test methods .16
10.6 Endurance.16
Annex A (normative) Lot tolerance percentage defective (LTPD) sampling plans .17
Annex B (informative) General description of specifications .22

Table A.1 – LTPD sampling plans .19
Table A.2 – Hypergeometric sampling plans for small lot size of 200 or less .20
Table A.3 – AQL and LTPD sampling plans.21

– 4 – 61988-5 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PLASMA DISPLAY PANELS –
Part 5: Generic specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS)
...