Arc welding equipment - Part 5: Wire feeders

IEC 60974-5:2013 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes induced by the publication of IEC 60974-1:2012; - addition of a new symbol for hot surface (as specified in Clause 9); - determination of the maximum load in accordance with 10.7.

Lichtbogenschweißeinrichtungen - Teil 5: Drahtvorschubgeräte

Matériel de soudage à l'arc - Partie 5: Dévidoirs

La CEI 60974-5:2013 spécifie les exigences de sécurité et de performance pour le matériel industriel et professionnel utilisé en soudage à l'arc et les techniques connexes pour l'alimentation en fil d'apport. Cette troisième édition annule et remplace la deuxième édition parue en 2007 et constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modifications induites par la publication de la CEI 60974-1:2012; - ajout d'un nouveau symbole pour la surface chaude (voir Article 9); - détermination de la charge maximale conformément au 10.7.

Oprema za obločno varjenje - 5. del: Podajalniki žice

Ta del standarda IEC 60974 določa varnostne zahteve in zahteve glede zmogljivosti za panožno ter profesionalno opremo, ki se uporablja pri obločnem varjenju in podobnih postopkih za podajanje žice polnila. Podajalnik žice je lahko samostojna enota, povezana z ločenim napajalnim virom varjenja, ali enota z napajalnim virom varjenja in podajalnikom žice v istem ohišju. Podajalnik žice je lahko primeren za ročni ali mehansko vodeni gorilnik. Ta del standarda IEC 60974 se ne uporablja za gorilnike z navojem, ki jih zajema IEC 60974-7. Ta del standarda IEC 60974 se ne uporablja za podajalnike žice, ki so namenjeni predvsem za laično uporabo in so oblikovani v skladu s standardom IEC 60974-6.

General Information

Status
Withdrawn
Publication Date
01-Aug-2013
Withdrawal Date
26-Jun-2016
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Mar-2022
Completion Date
06-Mar-2022

Relations

Buy Standard

Standard
EN 60974-5:2013
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60974-5:2013
01-oktober-2013
1DGRPHãþD
SIST EN 60974-5:2008
2SUHPD]DREORþQRYDUMHQMHGHO3RGDMDOQLNLåLFH
Arc welding equipment - Part 5: Wire feeders
Lichtbogenschweißeinrichtungen - Teil 5: Drahtvorschubgeräte
Matériel de soudage à l'arc - Partie 5: Dévidoirs
Ta slovenski standard je istoveten z: EN 60974-5:2013
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN 60974-5:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60974-5:2013

---------------------- Page: 2 ----------------------

SIST EN 60974-5:2013

EUROPEAN STANDARD
EN 60974-5

NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM

ICS 25.160 Supersedes EN 60974-5:2008


English version


Arc welding equipment -
Part 5: Wire feeders
(IEC 60974-5:2013)


Matériel de soudage à l'arc -  Lichtbogenschweißeinrichtungen -
Partie 5: Dévidoirs Teil 5: Drahtvorschubgeräte
(CEI 60974-5:2013) (IEC 60974-5:2013)





This European Standard was approved by CENELEC on 2013-06-27. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-5:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60974-5:2013
EN 60974-5:2013 - 2 -
Foreword
The text of document 26/503/FDIS, future edition 3 of IEC 60974-5, prepared by IEC/TC 26 "Electric
welding" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60974-5:2013.

The following dates are fixed:
(dop) 2014-03-27
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-06-27
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60974-5:2008.

EN 60974-5:2013 includes the following significant technical changes with respect to
EN 60974-5:2008:
– changes induced by the publication of EN 60974-1:2012;
– addition of a new symbol for hot surface (as specified in Clause 9);
– determination of the maximum load in accordance with 10.7.

This standard is to be read in conjunction with EN 60974-1.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60974-5:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60974-6 NOTE Harmonised as EN 60974-6.

---------------------- Page: 4 ----------------------

SIST EN 60974-5:2013
- 3 - EN 60974-5:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.