EN 60974-5:2008

Arc welding equipment - Part 5: Wire feeders

Specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power source or one where the welding power source and the wire feeder are housed in a single enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical improvements and clarifications.

Lichtbogenschweißeinrichtungen - Teil 5: Drahtvorschubgeräte

Matériel de soudage à l'arc - Partie 5: Dévidoirs

Spécifie les exigences de sécurité et de performance pour le matériel utilisé en soudage à l'arc et les techniques connexes pour l'alimentation en fil d'apport. Le dévidoir peut être une unité indépendante pouvant être raccordée à une source de courant de soudage séparée ou une unité intégrant la source de courant de soudage et le dévidoir dans une enveloppe unique. Cette nouvelle édition tient compte des modifications induites par la publication de la troisième édition de la CEI 60974-1, ainsi que d'améliorations et clarifications techniques.

Oprema za obločno varjenje - 5. del: Podajalniki žice (IEC 60974-5:2007)

General Information

• Status: Withdrawn
• Publication Date: 07-Feb-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 25.160 - Welding, brazing and soldering
• Technical Committee: CLC/TC 26 - Electric welding
• Drafting Committee: IEC/TC 26 - IEC_TC_26
• Parallel Committee: IEC/TC 26 - IEC_TC_26
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2016
• Completion Date: 27-Jun-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60974-5:2008 - Arc welding equipment -- Part 5: Wire feeders

Relations

• Replaces: EN 60974-5:2002 - Arc welding equipment - Part 5: Wire feeders
• Effective Date: 29-Jan-2023
• Replaced By: EN 60974-5:2013 - Arc welding equipment - Part 5: Wire feeders
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Arc welding equipment - Part 5: Wire feedersMatériel de soudage à l'arc - Partie 5: DévidoirsLichtbogenschweißeinrichtungen - Teil 5: Drahtvorschubgeräte25.160.30Varilna opremaWelding equipmentICS:SIST EN 60974-5:2008en,fr,deTa slovenski standard je istoveten z:EN 60974-5:200801-junij-2008SIST EN 60974-5:2008SLOVENSKI
STANDARDSIST EN 60974-5:20021DGRPHãþD







EUROPEAN STANDARD EN 60974-5 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-5:2008 E
ICS 25.160 Supersedes EN 60974-5:2002
English version
Arc welding equipment -
Part 5: Wire feeders (IEC 60974-5:2007)
Matériel de soudage à l'arc -
Partie 5: Dévidoirs (CEI 60974-5:2007)
Lichtbogenschweißeinrichtungen -
Teil 5: Drahtvorschubgeräte (IEC 60974-5:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 60974-5:2008
– 2 – Foreword The text of document 26/364/FDIS, future edition 2 of IEC 60974-5, prepared by IEC TC 26, Electric welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-5 on 2008-02-01. This European Standard supersedes EN 60974-5:2002. EN 60974-5:2007 includes the following significant technical changes with respect to EN 60974-5:2002: – changes induced by the publication of EN 60974-1:2005; – EN 60974-5 is not applicable to spool-on torches that EN 60974-7 covers (see Clause 1); – EN 60974-5 is not applicable to wire feeders which are designed for use by laymen that EN 60974-6
covers (see Clause 1); – wire feeders with degree of protection IP23S may be stored, but are not intended to be used outside
during precipitation unless sheltered (see 6.2.1 and Table 1); – withdrawal of voltage limitation for input supply network (see 6.4); – protective connection provision for welding circuit (see 6.5); – addition of tilting stability (see 10.5); – clarification of the definition of the thermal requirement test. The manufacturer gives the maximum
load (see Clause 9); – introduction of rating plate layout for stand-alone wire feeder (see 11.2); – introduction of new combined symbols for liquid/gas input and output based on EN 60974-1
(see 13.2). This standard is to be used in conjunction with EN 60974-1:2005 and EN 60974-7:2005. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2011-02-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60974-5:2007 was approved by CENELEC as a European Standard without any modification. __________



– 3 – EN 60974-5:2008
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-195 – 1) International Electrotechnical Vocabulary (IEV) -
Chapter 195: Earthing and protection against electric shock – –
IEC 60529 1989 Degrees of protection provided by
enclosures (IP Code) EN 60529 + corr. May
1991 1993
IEC 60974-1 2005 Arc welding equipment
...