EN 60264-1:1994/A1:2009
(Amendment)Packaging of winding wires - Part 1: Containers for round winding wires
Packaging of winding wires - Part 1: Containers for round winding wires
Verpackung von Wickeldrähten - Teil 1: Behälter für runde Wickeldrähte
Conditionnement des fils de bobinage - Partie 1: Fûts d'emballage pour fils de bobinage de section circulaire
Pakiranje navijalnih žic - 1. del: Embalaža za okrogle navijalne žice (IEC 60264-1:1968/A1:2009)
General Information
Relations
Overview
EN 60264-1:1994/A1:2009 (aligned with IEC 60264-1:1968/A1:2009) is the European/CENELEC amendment that specifies requirements for containers for round winding wires. Part 1 of the IEC 60264 series addresses packaging of insulated wires used for electrical windings and covers nominal dimensions, tolerances and designation rules for one‑way (disposable) and reusable containers used to store, ship and handle round section winding wire.
This amendment (A1) was approved on 2009-05-01 and updates the base EN 60264-1:1994 text (including replacement of Table 2 with additional nominal sizes and tolerances expressed in millimetres).
Key Topics
- Scope: Packaging requirements specifically for round winding wires (containers and their designation).
- Dimensional standards: Specifies nominal dimensions and tolerances (mm) for container features and presents additional standardized sizes (see revised Table 2).
- Container types: Covers both single-use (one-way) and multi‑use (returnable) containers and their naming/identification.
- Standardization purpose: Ensures consistent container sizing for interchangeability, logistics and handling compatibility across the electrotechnical supply chain.
- Document status: European adoption of an IEC amendment; national implementation deadlines and withdrawal dates were set after approval.
Applications
Who uses EN 60264-1:
- Winding wire manufacturers - to pack products in standardized containers for transport and storage.
- Motor, transformer and coil manufacturers - for receiving wire on consistent container types that integrate with production lines.
- Packaging and logistics engineers - to design handling and storage systems compatible with standard container dimensions.
- Quality assurance and procurement - to specify container requirements in contracts and incoming inspection criteria.
- Standards bodies and testing labs - to reference dimensional and designation conventions.
Practical benefits:
- Facilitates automated handling and storage by standardizing container interfaces.
- Reduces packaging errors and improves supply-chain compatibility.
- Simplifies procurement and specification of winding wire packaging.
Related Standards
- IEC/EN 60264 series - packaging of winding wires (this standard is Part 1).
- IEC 60851 - test methods for winding wires.
- IEC 60317 - specifications for particular types of winding wire.
Keywords: EN 60264-1:1994/A1:2009, packaging of winding wires, containers for round winding wires, IEC 60264-1, winding wire packaging, container dimensions, nominal tolerances, one-way containers, reusable containers.
Frequently Asked Questions
EN 60264-1:1994/A1:2009 is a amendment published by CLC. Its full title is "Packaging of winding wires - Part 1: Containers for round winding wires". This standard covers: Packaging of winding wires - Part 1: Containers for round winding wires
Packaging of winding wires - Part 1: Containers for round winding wires
EN 60264-1:1994/A1:2009 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires; 55.060 - Spools. Bobbins. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60264-1:1994/A1:2009 has the following relationships with other standards: It is inter standard links to EN 60264-1:1994. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60264-1:1994/A1:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2009
Pakiranje navijalnih žic - 1. del: Embalaža za okrogle navijalne žice (IEC 60264-
1:1968/A1:2009)
Packaging of winding wires -- Part 1: Containers for round winding wires
Verpackung von Wickeldrähten -- Teil 1: Nennabmessungen sowie Bezeichnung für
Einweg- und Mehrwegbehälter für runde Wickeldrähte
Conditionnement des fils de bobinage -- Partie 1: Fûts d'emballages pour fils de
bobinage de section circulaire
Ta slovenski standard je istoveten z: EN 60264-1:1994/A1:2009
ICS:
29.060.10 Žice Wires
55.060 Tulci. Vretena Spools. Bobbins
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60264-1/A1
NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM
ICS 55.060; 29.060.10
English version
Packaging of winding wires -
Part 1: Containers for round winding wires
(IEC 60264-1:1968/A1:2009)
Conditionnement des fils de bobinage - Verpackung von Wickeldrähten -
Partie 1: Fûts d'emballage pour fils Teil 1: Nennabmessungen sowie
de bobinage de section circulaire Bezeichnung für Einweg- und
(CEI 60264-1:1968/A1:2009) Mehrwegbehälter für runde Wickeldrähte
(IEC 60264-1:1968/A1:2009)
This amendment A1 modifies the European Standard EN 60264-1:1994; it was approved by CENELEC on
2009-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60264-1:1994/A1:2009 E
Foreword
The text of document 55/1099/FDIS, future amendment 1 to IEC 60264-1:1968, prepared by IEC TC 55,
Winding wires, was submit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...