EN 60927:2007
(Main)Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
Specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 5 kV. Should be read in conjunction with EN 60926.
Geräte für Lampen - Startgeräte (andere als Glimmstarter) - Anforderungen an die Arbeitsweise
Appareils auxiliaires pour lampes - Dispositifs d'amorçage (autres que starters à lueur) - Exigences de performance
Spécifie les prescriptions de performances relatives aux dispositifs d'amorçage (starters et amorceurs) pour lampes tubulaires à fluorescence et autres lampes à décharge, alimentés en courant alternatif de 50 Hz ou 60 Hz jusqu'à 1 000 V et produisant des impulsions d'amorçage ne dépassant pas 5 kV. Doit être lue conjointement avec la EN 60926.
Pribor za sijalke - Vžigne naprave (razen tlivnih starterjev) - Tehnične zahteve (IEC 60927:2007)
Ta mednarodni standard določa tehnične zahteve za vžigne naprave (starterje in sprožilce) za cevne fluorescenčne in druge razelektritvene sijalke za uporabo pri izmeničnem napajanju do 1000 V pri 50 Hz ali 60 Hz, pri čemer nastajajo vžigni impulzi, ki ne presegajo 5 kV. Ta standard se uporablja v povezavi s standardoma IEC 61347-1 in IEC 61347-2-1. OPOMBA 1: Vsi tlivni starterji za fluorescenčne in druge razelektritvene sijalke, vključno s termoreleji/izklopnimi stikali, bodo vključeni v standard IEC 60155. OPOMBA 2: Obstajajo regionalni standardi v zvezi z urejanjem zahtev za elektromagnetno združljivost za končne izdelke, kot so svetilke in neodvisne krmilne naprave. V svetilki je v tem smislu prevladujoča krmilna naprava. Krmilna naprava naj bi bila skupaj z drugimi sestavnimi deli v skladu s temi standardi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2008
1DGRPHãþD
SIST EN 60927:2000
SIST EN 60927:2000/A1:2000
SIST EN 60927:2000/A2:2006
3ULERU]DVLMDONH9åLJQHQDSUDYH UD]HQWOLYQLKVWDUWHUMHY 7HKQLþQH]DKWHYH ,(&
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance
requirements (IEC 60927:2007)
Geräte für Lampen - Startgeräte (andere als Glimmstarter) - Anforderungen an die
Arbeitsweise (IEC 60927:2007)
Appareils auxiliaires pour lampes - Dispositifs d'amorçage (autres que starters a lueur) -
Exigences de performance (IEC 60927:2007)
Ta slovenski standard je istoveten z: EN 60927:2007
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60927
NORME EUROPÉENNE
October 2007
EUROPÄISCHE NORM
ICS 29.140.30 Supersedes EN 60927:1996 + A1:1999 + A2:2004
English version
Auxiliaries for lamps -
Starting devices (other than glow starters) -
Performance requirements
(IEC 60927:2007)
Appareils auxiliaires pour lampes - Geräte für Lampen -
Dispositifs d'amorçage Startgeräte (andere als Glimmstarter) -
(autres que starters à lueur) - Anforderungen an die Arbeitsweise
Exigences de performance (IEC 60927:2007)
(CEI 60927:2007)
This European Standard was approved by CENELEC on 2007-09-11. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60927:2007 E
Foreword
The text of document 34C/783/FDIS, future edition 3 of IEC 60927, prepared by SC 34C, Auxiliaries for
lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60927 on 2007-09-11.
This European Standard supersedes EN 60927:1996 + A1:1999 + A2:2004.
Subclause 4.5 has been inserted in order to install an obligatory link to the relevant lamp standard.
*)
This standard is to be used in conjunction with EN 61347-1:200X and EN 61347-2-1:2000 + A1:2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60927:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60155 NOTE Harmonized as EN 60155:1996 (not modified).
__________
*)
At draft stage (IEC 61347-1:2007, modified).
- 3 - EN 60927:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60081 – Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
1) 2)
IEC 60192 – Low pressure sodium vapour lamps - EN 60192 2001
Performance specifications
IEC 60598-1 (mod) 2003 Luminaires - EN 60598-1 2004
A1 2006 Part 1: General requirements and tests A1 2006
+ corr. August 2007
1) 2)
IEC 60662 (mod) – High pressure sodium vapour lamps EN 60662 1993
1) 2)
IEC 60901 – Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
1) 2)
IEC 60921 – Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
1) 2)
IEC 60923 – Auxiliaries for lamps - Ballasts for discharge EN 60923 2005
lamps (excluding tubular fluorescent lamps) -
Performance requirements
1) 2)
IEC 61167 – Metal halide lamps EN 61167 1994
1) 3)
IEC 61347-1 (mod) – Lamp controlgear - EN 61347-1 200X
Part 1: General and safety requirements
1) 2)
IEC 61347-2-1 – Lamp controlgear - EN 61347-2-1 2001
Part 2-1: Particular requirements for starting + corr. July 2003
devices (other than glow starters)
1) 2)
IEC 61347-2-9 – Lamp controlgear - EN 61347-2-9 2001
Part 2-9: Particular requirements for ballasts + corr. July 2003
for discharge lamps (excluding fluorescent
lamps)
1) 2)
IEC 61547 – Equipment for general lighting purposes - EN 61547 1995
EMC immunity requirements
1)
Undated reference.
2)
Valid edition at date of issue.
3)
At draft stage.
INTERNATIONAL IEC
STANDARD
CEI
NORME
Third edition
INTERNATIONALE
Troisième édition
2007-06
Auxiliaries for lamps –
Starting devices (other than glow starters) –
Performance requirements
Appareils auxiliaires pour lampes –
Dispositifs d’amorçage (autres
que starters à lueur) –
Exigences de performance
PRICE CODE
V
CODE PRIX
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
Pour prix, voir catalogue en vigueur
– 2 – 60927 © IEC:2007
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Definitions .7
4 General requirements for tests .8
4.1 Ambient conditions, test quantity and sequence of tests .8
4.2 Supply voltage.8
4.3 Corresponding safety requirements .8
4.4 Immunity .8
4.5 Relation to lamp standards .8
5 Marking .8
6 Performance requirements for starters (other than glow starters) for fluorescent
lamps .9
6.1 Starting test.9
6.1.1 Starting test quantity .9
6.1.2 Conditions of acceptance .9
6.1.3 Conditions of test .9
6.1.4 Starters having a mechanical switching element .10
6.1.5 Starters having an electronic switching element .11
6.1.6 Non-reoperating level .12
6.1.7 Maximum pre-heat current (lamp fails to start).13
6.1.8 Interruption of starter function.13
6.2 Endurance test .13
6.2.1 Test quantity.13
6.2.2 Test conditions .13
6.2.3 Starters replaceable without tools.13
6.2.4 Starters not intended for replacement.13
6.2.5 Conditions of acceptance .13
6.3 Deactivated lamp test.14
6.3.1 Test quantity.14
6.3.2 Test conditions .14
6.3.3 Starters with a mechanical switching element but without cut-out .14
6.3.4 Starters with an electronic switching element but without cut-out.14
6.3.5 Starters with a mechanical switching element and with thermal cut-
out.14
6.3.6 Starters with an electronic switching element and electronic cut-out .15
6.3.7 Condition of acceptance .15
7 Performance requirements for ignitors .15
7.1 Starting test.15
7.1.1 Test quantity.15
7.1.2 Test conditions .15
7.1.3 Conditions of acceptance .15
7.1.4 Switching speed .16
7.1.5 Pulse voltage.16
7.1.6 Repetition rate, pulse position, width and height of starting pulse for
triggered ignitors .16
60927 © IEC:2007 – 3 –
7.1.7 Ignition energy for non-triggered ignitors .16
7.2 Non-reoperating level .16
7.3 Endurance test .17
7.3.1 Test quantity.17
7.3.2 Test conditions .17
7.3.3 Ignitors without replaceable switching elements .17
7.3.4 Ignitors with switching elements replaceable without tools .17
7.3.5 Ignitors with additional cut-outs .18
7.3.6 Conditions of compliance.18
Annex A (normative) Ballasts to be used for life testing .21
Annex B (informative) Explanation of starting conditions for electronic starters with an
electronic switching element .22
Annex C (informative) A guide to quoting product life and failure rate .30
Bibliography.31
Figure 1 – Pulse voltage measurement for starting devices.19
Figure 2 – Ignition energy measurement for non-triggered starting devices.20
Figure B.1 – Cathode heating current requirements for electronic starters with
electronic switching element .26
Figure B.2 – Interpretation of effective heating current.27
Figure B.3 – Starters which remove pre-heating current when open-circuit voltages are
elevated.28
Figure B.4 – Starters which have open-circuit voltage transi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.