EN IEC 63033-2:2019

Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring system

This part of IEC 63033 specifies recording methods of the drive monitoring system that is specified in IEC TS 63033-1 in order to view the recorded video file with free eye point technology.

Multimediasysteme und -geräte in Fahrzeugen - Fahrüberwachungssystem - Teil 2: Aufzeichnungsverfahren der Fahrüberwachungssysteme

Systèmes et équipements multimédias pour automobiles - Système de surveillance de la conduite Partie 2: Méthodes d'enregistrement du système de surveillance de la conduite

La présente partie de l'IEC 63033 spécifie les méthodes d'enregistrement du système de surveillance de la conduite défini dans l'IEC TS 63033-1 afin de permettre le visionnage du fichier vidéo enregistré à l'aide de la technologie "yeux libres".

Avtomobilski multimedijski sistemi in oprema - Sistem za nadzor vožnje - 2. del: Načini snemanja sistema pri nadzoru vožnje (IEC 63033-2:2018)

Ta del standarda IEC 63033 določa metode snemanja sistema za nadzor vožnje, opredeljenega v standardu IEC TS 63033-1, ki omogočajo ogled posnete video datoteke s tehnologijo Eye-Point.

General Information

• Status: Published
• Publication Date: 31-Jan-2019
• Withdrawal Date: 01-Jan-2022
• ICS: 33.160 - Audio, video and audiovisual engineering
• ICS: 43.040.15 - Car informatics. On board computer systems
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 01-Feb-2019
• Completion Date: 01-Feb-2019
• Ref Project: SIST EN IEC 63033-2:2019 - Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring system (IEC 63033-2:2018)

Relations

• Replaced By: EN IEC 63033-2:2022 - Multimedia Systems and equipment for vehicles - Surround view system - Part 2: Recording methods of the surround view system
• Effective Date: 31-May-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63033-2:2019
01-oktober-2019
Avtomobilski multimedijski sistemi in oprema - Sistem za nadzor vožnje - 2. del:
Načini snemanja sistema pri nadzoru vožnje (IEC 63033-2:2018)
Car multimedia systems and equipment - Drive monitoring system Part 2: Recording
methods of the drive monitoring system (IEC 63033-2:2018)
Multimediasysteme und -geräte in Fahrzeugen - Fahrüberwachungssystem - Teil 2:
Aufzeichnungsverfahren der Fahrüberwachungssysteme
(IEC 63033-2:2018)
Systèmes et équipements multimédias pour automobiles - Système de surveillance de la
conduite Partie 2: Méthodes d'enregistrement du système de surveillance de la conduite
(IEC 63033-2:2018)
Ta slovenski standard je istoveten z: EN IEC 63033-2:2019
ICS:
33.160.60 Večpredstavni (multimedijski) Multimedia systems and
sistemi in oprema za teleconferencing equipment
telekonference
43.060.50 Električna in elektronska Electrical and electronic
oprema. Krmilni sistemi equipment. Control systems
SIST EN IEC 63033-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63033-2:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 63033-2:2019


EUROPEAN STANDARD EN IEC 63033-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2019
ICS 33.160; 43.040.15

English Version
Car multimedia systems and equipment - Drive monitoring
system Part 2: Recording methods of the drive monitoring
system
(IEC 63033-2:2018)
Systèmes et équipements multimédias pour automobiles - Multimediasysteme und -geräte in Fahrzeugen -
Système de surveillance de la conduite Partie 2: Méthodes Fahrüberwachungssystem - Teil 2: Aufzeichnungsverfahren
d'enregistrement du système de surveillance de la conduite der Fahrüberwachungssysteme
(IEC 63033-2:2018) (IEC 63033-2:2018)
This European Standard was approved by CENELEC on 2019-01-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63033-2:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63033-2:2019
EN IEC 63033-2:2019 (E)
European foreword
The text of document 100/3029/CDV, future edition 1 of IEC 63033-2, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63033-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-10-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-01-02
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63033-2:2018 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 63033-2:2019
EN IEC 63033-2:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the
...