EN 61800-5-1:2003

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input or output voltages up to 35 kV, 50 Hz or 60 Hz.

Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 5-1: Anforderungen an die Sicherheit - Elektrische, thermische und energetische Anforderungen

Entraînements électriques de puissance à vitesse variable - Partie 5-1: Exigences de sécurité - Electrique, thermique et énergétique

specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input or output voltages up to 35 kV, 50 Hz or 60 Hz.

Električni pogonski sistemi z nastavljivo hitrostjo - 5-1. del: Varnostne zahteve - Električne, toplotne in energijske (IEC 61800-5-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 03-Apr-2003
• Withdrawal Date: 28-Feb-2006
• ICS: 29.130 - Switchgear and controlgear
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22G - IEC_SC_22G
• Parallel Committee: IEC/SC 22G - IEC_SC_22G
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Aug-2010
• Completion Date: 01-Aug-2010
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61800-5-1:2004 - Adjustable speed electrical power drive systems -- Part 5-1: Safety requirements - Electrical, thermal and energy

Relations

• Replaced By: EN 61800-5-1:2007 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61800-5-1:2004

STANDARD
september 2004
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO9DUQRVWQH
]DKWHYH(OHNWULþQHWRSORWQHLQHQHUJLMVNH,(&
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy (IEC 61800-5-1:2003)
ICS 5HIHUHQþQDãWHYLOND
29.160.30; 29.200
SIST EN 61800-5-1:2004(en)
!"#$%&’% ()*$+(

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61800-5-1
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003

ICS 29.130


English version


Adjustable speed electrical power drive systems
Part 5-1: Safety requirements -
Electrical, thermal and energy
(IEC 61800-5-1:2003)


Entraînements électriques de puissance  Elektrische Leistungsantriebssysteme
à vitesse variable mit einstellbarer Drehzahl
Partie 5-1: Exigences de sécurité - Teil 5-1: Anforderungen an die Sicherheit -
Electrique, thermique et énergétique Elektrische, thermische und energetische
(CEI 61800-5-1:2003) Anforderungen
(IEC 61800-5-1:2003)





This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61800-5-1:2003 E

---------------------- Page: 2 ----------------------

EN 61800-5-1:2003 - 2 -
Foreword
The text of document 22G/108/FDIS, future edition 1 of IEC 61800-5-1, prepared by SC 22G,
Semiconductor power converters for adjustable speed electric drive systems, of IEC TC 22, Power
electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61800-5-1 on 2003-03-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes C and ZA are normative and annexes A, B, D and E are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61800-5-1:2003 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 61082 NOTE Harmonized as EN 61082 series (not modified).
IEC 62079 NOTE Harmonized as EN 62079:2001 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61800-5-1:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60034 Series Rotating electrical machines EN 60034 Series

1)
IEC 60050-111 - International Electrotechnical - -
Vocabulary (IEV)
Chapter 111: Physics and chemistry

1)
IEC 60050-151
...