EN 61347-1:2015/A1:2021

Lamp controlgear - Part 1: General and safety requirements

2020-08-05 NEXT ACTION: CCMC action by 2020-08-31
2020-08-03 CCMC to prepare request for BT
2020-08-03 since no 2nd assessment allowed, EC confirmed that TC met requirements for pos. ass.  
2019-02-20 PC: "lack of compliance" for LVD, TC to adress comments
2019-01-30 PC: Sent for LVD assessment
2018-03-22 - missing Annex ZZ - on hold
2017-10-05 - Cannot allocate for publication due to missing assessment from Consultant.

Geräte für Lampen - Teil 1: Allgemeine und Sicherheitsanforderungen

Appareillages de lampes - Partie 1: Exigences générales et exigences de sécurité

Stikalne naprave za sijalke - 1. del: Splošne in varnostne zahteve - Dopolnilo A1 (IEC 61347-1:2015/A1:2017)

General Information

• Status: Published
• Publication Date: 07-Jan-2021
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Jan-2021
• Completion Date: 08-Jan-2021
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Mandate: M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
• Ref Project: SIST EN 61347-1:2015/A1:2021 - Lamp controlgear - Part 1: General and safety requirements (IEC 61347-1:2015/A1:2017)

Relations

• Amends: EN 61347-1:2015 - Lamp controlgear - Part 1: General and safety requirements
• Effective Date: 19-Jul-2016
• Revised: FprEN IEC 61347-1:2024 - Controlgear for electric light sources - Safety - Part 1: General requirements
• Effective Date: 24-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2021
Stikalne naprave za sijalke - 1. del: Splošne in varnostne zahteve - Dopolnilo A1
(IEC 61347-1:2015/A1:2017)
Lamp controlgear - Part 1: General and safety requirements (IEC 61347-
1:2015/A1:2017)
Geräte für Lampen - Teil 1: Allgemeine und Sicherheitsanforderungen (IEC 61347-
1:2015/A1:2017)
Appareillages de lampes - Partie 1: Exigences générales et exigences de sécurité (IEC
61347-1:2015/A1:2017)
Ta slovenski standard je istoveten z: EN 61347-1:2015/A1:2021
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61347-1:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 29.140.99
English Version
Lamp controlgear - Part 1: General and safety requirements
(IEC 61347-1:2015/A1:2017)
Appareillages de lampes - Partie 1: Exigences générales et Geräte für Lampen - Teil 1: Allgemeine und
exigences de sécurité Sicherheitsanforderungen
(IEC 61347-1:2015/A1:2017) (IEC 61347-1:2015/A1:2017)
This amendment A1 modifies the European Standard EN 61347-1:2015; it was approved by CENELEC on 2017-09-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61347-1:2015/A1:2021 E

European foreword
The text of document 34C/1351/FDIS, future edition 1 of IEC 61347-1:2015/A1, prepared by
IEC/SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61347-1:2015/A1:2021.
The following dates are fixed:
• latest date by which the document has to be (dop) 2021-07-08
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2024-01-08
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61347-1:2015/A1:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60838-2-2 NOTE Harmonized as EN 60838-2-2.
IEC 60947-7-4 NOTE Harmonized as EN 60947-7-4.
IEC 60998 (series) NOTE Harmonized as EN 60998 (series).
IEC 61048 NOTE Harmonized as EN 61048.
IEC 61643-11 NOTE Harmonized as EN 61643-11.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60065 (mod) 2001 Audio, video and similar electronic EN 60065 2002
apparatus - Safety requirements
- -  +corrigendum Mar. 2006
- -  +corrigendum Aug. 2007
IEC 60068-2-14 2009 Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60081 - Double-capped fluorescent lamps - EN 60081 -
Performance specifications
IEC 60085 2007 Electrical insulation - Thermal evaluation EN 60085 2008
and designation
IEC 60112 2003 Method for the determination of the proof EN 60112 2003
and the comparative tracking indices of
solid insulating materials
+A1 2009  +A1 2009
IEC 60216 series Electrical insulating materials - Thermal EN 60216 series
endurance properties -- Part 1: Ageing
procedures and evaluation of test results
IEC 60317-0-1 2013 Specifications for particular types of EN 60317-0-1 2014
winding wires -- Part 0-1: General
requirements - Enamelled round copper
wire
IEC 60384-14 - Fixed capacitors for use in electronic EN 60384-14 -
equipment -- Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
IEC 60417 - Graphical symbols for use on equipment. HD 243 S12 -
Index, survey and compilation of the single
sheets.
- -  +corrigendum Oct. -
+A1 1979  - -
Publication Year Title EN/HD Year
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
- -  +corrigendum May 1993
+A1 1999  +A1 2000
+A2 2013  +A2 2013
IEC 60598-1 (mod) 2014 Luminaires -- Part 1: General requirements EN 60598-1 2015
and tests
-  +A1 2018
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -- Part 1:
Principles, requirements and tests
IEC 60664-4 2005 Insulation coordination for equipment EN 60664-4 2006
within low-voltage systems -- Part 4:
Consideration of high-frequency voltage
stress
- -  +corrigendum Oct. 2006
IEC 60691 2002 Thermal-links - Requirements and EN 60691 2016
application guide
IEC 60695-2-10 - Fire hazard testing -- Part 2-10: EN 60695-2-10 2013
Glowing/hot-wire based test methods -
Glow-wire apparatus and common test
procedure
IEC 60695-11-5 - Fire hazard testing -- Part 11-5: Test EN 60695-11-5 2017.
flames - Needle-flame test method -
Apparatus, confirmatory test arrangement
and guidance
IEC 60730-2-3 - Automatic electrical controls for household EN 60730-2-3 2007
and similar use -- Part 2-3: Particular
requirements for thermal protectors for
ballasts for tubular fluorescent lamps
IEC 60884-2-4 - Plugs and socket-outlets for household and - -
similar purposes -- Part 2-4: Particular
requirements for plugs and socket-outlets
for SELV
IEC 60901 - Single-capped fluorescent lamps - EN 60901 -
Performance specifications
IEC 60906-3 - IEC System of plugs and socket-outlets for - -
household and similar purposes -- Part 3:
SELV plugs and socket-outlets, 16 A 6V,
12 V, 24 V, 48 V, a.c. and d.c.
IEC 60921 2004 Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
+A1 2006  +A1 2006
IEC 60923 2005 Auxiliaries for lamps - Ballasts for EN 60923 2005
discharge lamps (excluding tubular
fluorescent lamps) - Performance
requirements
Publication Year Title EN/HD Year
IEC 60950-1 - Information technology equipment - Safety EN 60950-1 2006
-- Part 1: General requirements
- -  +A11 2009
+A1 2010
- -  +A12 2011
- -  +AC 2011
+A2 2013
IEC 61180-1 1992 High-voltage test techniques for low- EN 61180-1 1994
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61189-2 2006 Test methods for electrical materials, EN 61189-2 2006
printed boards and other interconnection
structures and assemblies -- Part 2: Test
methods for materials for interconnection
structures
IEC 61249-2 series Materials for printed boards and other EN 61249-2 series
interconnecting structures -- Part 2-1:
Reinforced base materials, clad and unclad
- Phenolic cellulose paper reinforced
laminated sheets, economic grade, copper-
clad
IEC 61347-2 series Lamp controlgear -- Part 2-1: Particular EN 61347-2 series
requirements for starting devices (other
than glow starters)
IEC 61347-2-2 - Lamp controlgear - Part 2-2: Particular EN 61347-2-2 2012
requirements for d.c. or a.c. supplied
electronic step-down convertors for
filament lamps
IEC 61347-2-3 - Lamp control gear - Part 2-3: Particular EN 61347-2-3 2011
requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent
lamps
-  AC 2011
-  A1 2017
IEC 61347-2-7 - amp controlgear - Part 2-7: Particular EN 61347-2-7 2012
requirements for battery supplied electronic
controlgear for emergency lighting (self-
contained)
IEC 61347-2-8 - Lamp controlgear -- Part 2-8: Particular EN 61347-2-8 2001
requirements for ballasts for fluorescent
lamps
- -  +corrigendum Jul. 2003-
+A1 2006
- -  +corrigendum Dec. 2013-
IEC 61347-2-9 2012 Lamp controlgear -- Part 2-9: Particular EN 61347-2-9 2013
requirements for electromagnetic
controlgear for discharge lamps (excluding
fluorescent lamps)
Publication Year Title EN/HD Year
IEC 61347-2-13 - Lamp controlgear - Part 2-13: Particular EN 61347-2-13 2014
requirements for d.c. or a.c. supplied
electronic controlgear for LED modules
-  A1 2017
IEC 61558-1 2005 Safety of power transformers, power EN 61558-1 2005
supplies, reactors and similar products --
Part 1: General requirements and tests
- -  +corrigendum Aug. 2006
IEC 61558-2-6 2009 Safety of transformers, reactors, power EN 61558-2-6 2009
supply units and similar products for supply
voltages up to 1 100 V -- Part 2-6:
Particular requirements and tests for safety
isolating transformers and power supply
units incorporating safety isolating
transformers
IEC 61558-2-16 2009 Safety of transformers, reactors, power EN 61558-2-16 2009
supply units and similar products for
voltages up to 1 100 V -- Part 2-16:
Particular requirements and tests for switch
mode power supply units and transformers
for switch mode power supply units
ISO 4046-4 2002 Paper, board, pulps and related terms - - -
Vocabulary -- Part 4: Paper and board
grades and converted products
Annex ZZ
(informative)
Relationship between this European Standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European Standard
and Annex I of Directive 2014/35/EU [2014 OJ L96]
Safety objectives of Clause(s) / sub-clause(s) Remarks / Notes
Directive 2014/35/EU of this EN
(1)(a) Clause 7 None
(1)(b) Clause 4 None
(1)(c) See items 2 and 3 of this table None
(2)(a) Clause 8, 9, 10, 11, 12, 14, 15, EMF is not covered in this
16, 17, 18 standard.
EMF for lighting equipment is
covered by EN 62493.
(2)(b) Clause 8, 14, 17, 18 None
(2)(c) Clause 8, 14, 17, 18 None
(2)(d) Clause 9, 10, 11, 12, 14, 15, 16 None
17, 18
(3)(a) Clause 9, 10, 14, 15, 17, 18, 19 None
(3)(b) Clause 8, 11, 12, 14,15, 16, 17, None
18, 19
(3)(c) Clause 8, 14, 15, 16, 17, 18, 19 None.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
WARNING 3 — According to its scope, EN 61347-1 shall not be applied directly to controlgear for
which a specific EN 61347-2 part is applicable.
IEC 61347-1 ®
Edition 3.0 2017-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
...