EN 60297-3-101:2004
(Main)Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
Covers the basic dimensional relationship of a modular range of subracks and associated plug-in units in compliance with the EN 60297 series. Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units.
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil 3-101: Baugruppenträger und Baugruppen
Structures mécaniques pour équipement électronique - Dimensions des structures mécaniques de la série de 482,6 mm (19 in) - Partie 3-101: Bacs et blocs enfichables associés
Covers the basic dimensional relationship of a modular range of subracks and associated plug-in units in compliance with the EN 60297 series. Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units.
Mehanske konstrukcije elektronske opreme – Mere mehanskih konstrukcij v seriji 482,6 mm (19 in) – 3-101. del: Podokviri in pripadajoče vtične enote (IEC 60297-3-101:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60297-3-101:2005
STANDARD
december 2005
Mehanske konstrukcije elektronske opreme – Mere mehanskih konstrukcij v
seriji 482,6 mm (19 in) – 3-101. del: Podokviri in pripadajoče vtične enote (IEC
60297-3-101:2004)
Mechanical structures for electronic equipment – Dimensions of mechanical
structures of the 482,6 mm (19 in) series – Part 3-101: Subracks and associated
plug-in units (IEC 60297-3-101:2004)
ICS 31.240 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60297-3-101
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2004
ICS 31.240 Supersedes HD 493.3 S2:1993, EN 60297-4:1995 + A1:1999, EN 60297-5-100:2001,
EN 60297-5-102:2001, EN 60297-5-103:2001 & EN 60297-5-107:2001
English version
Mechanical structures for electronic equipment -
Dimensions of mechanical structures of the 482,6 mm (19 in) series
Part 3-101: Subracks and associated plug-in units
(IEC 60297-3-101:2004)
Structures mécaniques Bauweisen für elektronische
pour équipement électronique - Einrichtungen -
Dimensions des structures mécaniques Maße der 482,6-mm-(19-in-)Bauweise
de la série de 482,6 mm (19 in) Teil 3-101: Baugruppenträger
Partie 3-101: Bacs et blocs enfichables und Baugruppen
associés (IEC 60297-3-101:2004)
(CEI 60297-3-101:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60297-3-101:2004 E
Foreword
The text of document 48D/299/FDIS, future edition 1 of IEC 60297-3-101, prepared by SC 48D,
Mechanical structures for electronic equipment, of IEC TC 48, Electromechanical components and
mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60297-3-101 on 2004-09-01.
This European Standard supersedes HD 493.3 S2:1993, EN 60297-4:1995 + A1:1999,
EN 60297-5-100:2001, EN 60297-5-102:2001 + corrigendum July 2001, EN 60297-5-103:2001 and
EN 60297-5-107:2001.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60297-3-101:2004 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60297-3-101:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60249-2-1 - Base materials for printed circuits EN 60249-2-1 1994
Part 2: Specifications - Specification
No. 1: Phenolic cellulose paper copper-
clad laminated sheet, high electrical
quality
IEC 60297-1 1986 Dimensions of mechanical structures of HD 493.1 S1 1988
the 482,6 mm (19 in) series
Part 1: Panels and racks
IEC 60297-2 1982 Part 2: Cabinets and pitches of rack HD 493.2 S1 1988
structures
IEC 60603-2 1995 Connectors for frequencies below 3 MHz EN 60603-2 1998
for use with printed boards
Part 2: Detail specification for two-part
connectors with assessed quality, for
printed boards, for basic grid of 2,54 mm
(0,1 in) with common mounting features
IEC 60917-1 1998 Modular order for the development of EN 60917-1 1998
mechanical structures for electronic
equipment practices
Part 1: Generic standard
IEC 61076-4-101 2001 Connectors for electronic equipment EN 61076-4-101 2001
Part 4-101: Printed board connectors with
assessed quality - Detail specification for
two-part connector modules, having a
basic grid of 2,0 mm for printed boards
and backplanes in accordance with
IEC 60917
IEC 61076-4-113 2002 Part 4-113: Detail specification for two- EN 61076-4-113 2003
part connectors having 5 rows with a grid
of 2,54 mm for printed boards and
backplanes in bus applications
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
IEC 61587-1 1999 Mechanical structures for electronic EN 61587-1 1999
equipment - Tests for IEC 60917 and
IEC 60297
Part 1: Climatic, mechanical tests and
safety aspects for cabinets, racks,
subracks and chassis
IEC 61587-3 1999 Part 3: Electromagnetic shielding - -
performance tests for cabinets, racks and
subracks
INTERNATIONAL IEC
STANDARD 60297-3-101
First edition
2004-08
Mechanical structures for electronic equipment –
Dimensions of mechanical structures
of the 482,6 mm (19 in) series –
Part 3-101:
Subracks and associated plug-in units
” IEC 2004 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
S
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
– 2 – 60297-3-101 ” IEC:2004(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope and object.6
2 Normative references .6
3 Terms and definitions .7
4 Arrangement overview .7
5 Subrack dimensions, front mounting area.8
6 Subrack dimensions, rear mounting area.11
7 Printed board type plug-in units, front mounted .13
8 Box type plug-in units, front mounted .15
9 Printed board type plug-in units, rear mounted .17
10 Subrack and plug-in units with electromagnetic shielding provisions .18
11 Plug-in units electrostatic discharge provisions .20
12 Dimensions used in the figures .22
Figure 1 – Relationship between the new IEC 60297-3 series and the old IEC 60297 series .5
Figure 2 – Arrangement overview.7
Figure 3 – Subrack dimensions, front mounting area – Part 1.8
Figure 4 – Subrack dimensions, front mounting area – Part 2.9
Figure 5 – Subrack dimensions, front mounting area – Part 3.10
Figure 6 – Subrack dimensions, rear mounting area .11
Figure 7 – Printed board type plug-in unit, 3U.13
Figure 8 – Printed board type plug-in unit, 6U.14
Figure 9 – Printed board type plug-in unit, 9U.14
Figure 10 – Box type plug-in unit, 3U.15
Figure 11 – Box type plug-in unit, 6U.16
Figure 12 – Box type plug-in unit, 9U.16
Figure 13 – Printed board type plug-in units, rear mounting dimensions .17
Figure 14 – Subrack shielding interface dimensions.18
Figure 15 – Plug-in unit and filler panels shielding interface dimensions.19
Figure 16 – ESD contact interface dimensions.20
Figure 17 – ESD strip interface dimensions .20
Table 1 – RD1 dimensions .11
Table 2 – Depth dimensions RD3, RD4 .17
Table 3 – Height dimensions .21
Table 4 – Depth dimensions.21
60297-3-101 ” IEC:2004(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
DIMENSIONS OF MECHANICAL STRUCTURES OF THE
482,6 mm (19 in) SERIES –
Part 3-101: Subracks and associated plug-in units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.