EN 60745-2-13:2007

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

Applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. Does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-13: Besondere Anforderungen für Kettensägen

Outils électroportatifs à moteur - Sécurité - Partie 2-13: Règles particulières pour les scies à chaîne

S'applique aux scies à chaîne destinées à couper du bois et conçues pour être utilisées par une seule personne. Cette norme ne s'applique pas aux scies à chaîne conçues pour être utilisées conjointement avec un guide-chaîne et un couteau diviseur ou de toute autre manière telle qu'avec un support ou comme une machine fixe ou transportable. Ne s'applique pas aux scies à chaîne pour l'élagage des arbres comme défini dans l'ISO 11681-2, les scies à perche et les perches élagueuses.

Varnost električnih ročnih orodij - 2-13. del: Posebne zahteve za verižne žage (IEC 60745-2-13:2006, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2007
• Withdrawal Date: 28-Feb-2010
• ICS: 25.140.20 - Electric tools
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Dec-2009
• Completion Date: 29-Dec-2009
• Directive: 98/37/EC - Machinery
• Ref Project: SIST EN 60745-2-13:2008 - Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws

Relations

• Replaces: EN 50144-2-13:2002 - Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
• Effective Date: 29-Jan-2023
• Replaced By: EN 60745-2-13:2009 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• Effective Date: 07-Jun-2022
• Amended By: EN 60745-2-13:2007/prAA - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• Effective Date: 28-Jan-2023
• Revised: EN 60745-2-13:2009 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• Effective Date: 13-May-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-13:2008
01-januar-2008
1DGRPHãþD
SIST EN 50144-2-13:2002
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DYHULåQHåDJH,(&
VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for
chain saws
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-13: Besondere
Anforderungen für Kettensägen
Outils électroportatifs a moteur - Sécurité - Partie 2-13: Regles particulieres pour les
scies a chaîne
Ta slovenski standard je istoveten z: EN 60745-2-13:2007
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
65.060.80 Gozdarska oprema Forestry equipment
SIST EN 60745-2-13:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60745-2-13

NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM

ICS 25.140.20; 65.060.80 Supersedes EN 50144-2-13:2002


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-13: Particular requirements for chain saws
(IEC 60745-2-13:2006, modified)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-13: Règles particulières Sicherheit -
pour les scies à chaîne Teil 2-13: Besondere Anforderungen
(CEI 60745-2-13:2006, modifiée) für Kettensägen
(IEC 60745-2-13:2006, modifiziert)




This European Standard was approved by CENELEC on 2007-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-13:2007 E

---------------------- Page: 2 ----------------------

EN 60745-2-13:2007 - 2 -
Foreword
The text of the International Standard IEC 60745-2-13:2006, prepared by SC 61F, Safety of
hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar
electrical appliances, together with the common modifications prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools, was
submitted to the CENELEC Unique Acceptance Procedure and was approved by CENELEC
as EN 60745-2-13 on 2007-03-01.
This European Standard supersedes EN 50144-2-13:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-03-01
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated
tools (for the purpose of this standard referred to simply as tools) which could come
within the scope of this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics
of these specific tools.
This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and covers essential
requirements of EC Directive 98/37/EC (Machinery Directive), amended by Directive
98/79/EC. See Annex ZZ.
Compliance with the clauses of Part 1 together with this Part 2 provides one means of
conforming with the essential health and safety requirements of the Directive concerned.
CEN/TC 144 is producing standards for non-electric chain saws (EN 608).
Warning: Other requirements and other EC Directives can be applicable to the products
falling within
...