EN 1093-2:2006

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

This European Standard specifies a method to enable measurements of the emission rates of gaseous substances from a single machine, whose operation can be controlled, using tracer gas techniques.
This European Standard is not applicable to machinery which is manufactured before the date of its publication as an EN.

Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 2: Tracergasverfahren zur Messung der Emissionsrate eines bestimmten luftverunreinigenden Stoffes

Dieses Dokument legt ein Verfahren fest, um unter Einsatz von Tracergasverfahren Messungen der
Emissionsraten gasförmiger Substanzen von einer einzelnen Maschine zu ermöglichen, deren Betrieb
gesteuert werden kann.

Sécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 2: Méthode par traçage pour l'évaluation du débit d'émission d'un polluant donné

Le présent document spécifie une méthode qui permet de mesurer les débits d�émission de substances
gazeuses provenant d�une seule machine dont le fonctionnement peut être contrôlé et ce, en appliquant des
techniques de traçage.

Varnost strojev – Vrednotenje emisije nevarnih snovi, ki jih prenaša zrak – 2. del: Metoda s slednim plinom za merjenje stopnje emisije določene onesnaževalne snovi

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2006
• Withdrawal Date: 24-Jun-2008
• ICS: 13.040.40 - Stationary source emissions
• ICS: 13.300 - Protection against dangerous goods
• Technical Committee: CEN/TC 114 - Safety of machinery
• Drafting Committee: CEN/TC 114/WG 15 - Emission of airborne hazardous substances from machines
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Jun-2008
• Completion Date: 25-Jun-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 1093-2:2007 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

Relations

• Merged Into: EN 1093-2:2006+A1:2008 - Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutantQDåHYDOQHVQRYLSécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 2: Méthode par traçage pour l'évaluation du débit d'émission d'un polluant donnéSicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 2: Tracergasverfahren zur Messung der Emissionsrate eines bestimmten luftverunreinigenden StoffesTa slovenski standard je istoveten z:EN 1093-2:2006SIST EN 1093-2:2007en13.110Varnost strojevSafety of machinery13.040.40Stationary source emissionsICS:SLOVENSKI
STANDARDSIST EN 1093-2:200701-marec-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1093-2December 2006ICS 13.300; 13.040.40 English VersionSafety of machinery - Evaluation of the emission of airbornehazardous substances - Part 2: Tracer gas method for themeasurement of the emission rate of a given pollutantSécurité des machines - Evaluation de l'émission desubstances dangereuses véhiculées par l'air - Partie 2:Méthode par traçage pour l'évaluation du débit d'émissiond'un polluant donnéSicherheit von Maschinen - Bewertung der Emission vonluftgetragenen Gefahrstoffen - Teil 2: Tracergasverfahrenzur Messung der Emissionsrate eines bestimmtenluftverunreinigenden StoffesThis European Standard was approved by CEN on 4 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1093-2:2006: E



EN 1093-2:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Principle.5 5 Location of the machine.5 6 Apparatus and materials.6 7 Measurement points.7 8 Procedure.8 9 Data analysis.8 10 Expression of results.9 11 Test report.10 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/3
...