Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

This European standard specifies the details for the point of failure, continuity, checking arrangement, test sample, test procedure and test report relevant to optical fibre cables tested as described either in EN 50200 or in EN 50577. The test determines the survival time for circuit integrity of the optical fibre cables when exposed to fire under the conditions either given in EN 50577 or given in EN 50200. EN 50200 is limited to cables with an overall diameter not exceeding 20 mm. This standard includes (Annex A) the field of direct application and rules for extended application of test results (EXAP). Details regarding P classification using data from the EN 50577 test and PH classification using data from the EN 50200 test are given in EN 13501-3. Information regarding classification is given in Annex B.

Prüfung des Übertragungsverhaltens von Lichtwellenleiterkabeln im Brandfall

Procédure d'évaluation de l'intégrité des circuits à fibres optiques dans un câble soumis à un essai de résistance au feu

La présente Norme européenne donne des détails concernant le point de défaillance, le dispositif de contrôle de continuité, l'échantillon d'essai, la procédure d'essai et le rapport d'essai applicables aux câbles à fibres optiques soumis aux essais tel que décrit dans l'EN 50200 ou dans l'EN 50577. L'essai permet de déterminer la durée de survie de circuits de câbles à fibres optiques en cas d'une exposition au feu dans les conditions données dans l'EN 50577 ou dans l'EN 50200. L'EN 50200 se limite aux câbles dont le diamètre extérieur ne dépasse pas 20 mm. La présente norme spécifie (Annexe A) le domaine d'application directe, ainsi que les règles relatives à l'application étendue des résultats d'essai (EXAP, extended application). Les détails de la classification P utilisant les données de l'essai selon l'EN 50577 et de la classification PH utilisant les données de l'essai selon l'EN 50200 sont donnés dans l'EN 13501 3. Les informations relatives à la classification sont données à l'Annexe B.

Metoda preskušanja odpornosti nezaščitenih optičnih kablov, ki se uporabljajo v zasilnih tokokrogih (s premerom, manjšim ali enakim 20 mm), proti ognju

Ta evropski standard določa podrobnosti o točki odpovedi, napravi za preverjanje neprekinjenosti, preskusnem vzorcu, preskusnem postopku in poročilu o preskusu v zvezi z optičnimi kabli pri preskušanju, kot je opisano v standardu EN 50200 ali EN 50577.
Preskus določi čas neprekinjenosti tokokroga optičnega kabla, ko je ta izpostavljen požaru pod pogoji iz standarda EN 50200 ali EN 50577.
Standard EN 50200 je omejen na kable, katerih skupni premer ne presega 20 mm.
Ta standard vključuje (dodatek A) neposredno uporabo in pravila za razširjeno uporabo rezultatov preskusa (EXAP). Podrobnosti o razvrščanju P na podlagi podatkov iz preskusa EN 50577 in razvrščanju PH na podlagi podatkov iz preskusa EN 50200 so podane v standardu EN 13501-3. Informacije o razvrščanju so podane v dodatku B.

General Information

Status
Published
Publication Date
04-Aug-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
25-Aug-2021

Buy Standard

Standard
EN 50582:2016
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50582:2016
01-oktober-2016
0HWRGDSUHVNXãDQMDRGSRUQRVWLQH]DãþLWHQLKRSWLþQLKNDEORYNLVHXSRUDEOMDMRY
]DVLOQLKWRNRNURJLK VSUHPHURPPDQMãLPDOLHQDNLPPP SURWLRJQMX
Method of test for resistance to fire of unprotected optical fibre cables for use in
emergency circuits (diameter less than or equal to 20 mm)
Prüfung des Isolationserhaltes im Brandfall von Lichtwellenleiterkabeln für die
Verwendung in Notstromkreisen bei ungeschützter Verlegung (Durchmesser kleiner oder
gleich 20 mm)
Méthode d'essai de résistance au feu des câbles à fibre optique sans protection pour
utilisation dans les circuits de secours (diamètre inférieur ou égal à 20 mm)
Ta slovenski standard je istoveten z: EN 50582:2016
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 50582:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50582:2016

---------------------- Page: 2 ----------------------

SIST EN 50582:2016


EUROPEAN STANDARD EN 50582

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2016
ICS 13.220.40; 33.180.10

English Version
Procedure to assess the circuit integrity of optical fibres in a
cable under resistance to fire testing
Procédure d'évaluation de l'intégrité des circuits à fibres Prüfung des Übertragungsverhaltens im Brandfall von
optiques dans un câble soumis à un essai de résistance au Lichtwellenleiterkabeln für die Verwendung in
feu Notstromkreisen bei ungeschützter Verlegung
(Durchmesser kleiner oder gleich 20 mm)
This European Standard was approved by CENELEC on 2016-06-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50582:2016 E

---------------------- Page: 3 ----------------------

SIST EN 50582:2016
EN 50582:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Circuit integrity (Continuity of signal supply) . 4
4 Cable test procedure . 5
4.1 Test equipment . 5
4.2 Sample preparation . 5
4.3 Test procedure . 5
4.4 Optical measurements during fire . 6
5 Duration of survival . 6
6 Test report (optical fibre cab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.