iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60255-8:1998

(Main)

Electrical relays - Part 8: Thermal electrical relays

Electrical relays - Part 8: Thermal electrical relays

This edition applies to dependent specified time electrical measuring relays which protect equipment from electrical thermal damage by the measurement of current flowing in protected equipment. States the particular requirements for thermal electrical relays. Is to be read in conjunction with higher level documents in the EN 60255 series.

Elektrische Relais - Teil 8: Überlastrelais

Relais électriques - Partie 8: Relais électriques thermiques

Est applicable aux relais électriques de mesure à temps dépendant spécifié qui protégent le dispositif contre les détériorations thermiques d'origine électrique par la mesure du courant circulant dans le dispositif protégé. Donne les spécifications particulières des relais électriques thermiques. Doit être lue conjointement avec les documents de niveau supérieur de la série de EN 60255 de la CEI.

Electrical relays - Part 8: Thermal electrical relays

General Information

Status
Withdrawn
Publication Date
12-Jan-1998
Withdrawal Date
31-Jul-1998
ICS
29.120.70 - Relays
Technical Committee
CLC/TC 95X - Measuring relays and protection equipment
Drafting Committee
IEC/TC 95 - IEC_TC_95
Parallel Committee
IEC/TC 95 - IEC_TC_95
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Sep-2016
Completion Date
03-Sep-2016
Ref Project
SIST EN 60255-8:2001 - Electrical relays -- Part 8: Thermal electrical relays

Relations

Replaced By
EN 60255-149:2013 - Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays
Effective Date
28-Jan-2023

Buy Standard

EN 60255-8:2001EN 60255-8:2001
PreviousNext
Standard
EN 60255-8:2001
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electrical relays - Part 8: Thermal electrical relaysElektrische Relais -- Teil 8: ÜberlastrelaisRelais électriques -- Partie 8: Relais électriques thermiquesElectrical relays -- Part 8: Thermal electrical relays29.120.70RelejiRelaysICS:Ta slovenski standard je istoveten z:EN 60255-8:1998SIST EN 60255-8:2001en01-september-2001SIST EN 60255-8:2001SLOVENSKI
STANDARD



SIST EN 60255-8:2001



SIST EN 60255-8:2001


...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60255-187-1:2021/AC:2023-04(Corrigendum)
Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers
SIST EN IEC 60255-187-1:2021/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60255-1:2023(Main)
Measuring relays and protection equipment - Part 1: Common requirements
SIST EN IEC 60255-1:2023

IEC 60255-1:2022 specifies common rules and requirements applicable to measuring relays and protection equipment, including any combination of equipment to form a distributed protection scheme for power system protection such as control, monitoring and process interface equipment, to obtain uniformity of requirements and tests. This document covers the main technologies in use today; other emerging technologies present specific EMC and safety issues but the philosophy in this document will be applied. This second edition cancels and replaces the first edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition: a. scope of document clarified; b. merging units and communications as an integral part of the protection added; c. binary output clarification expanded; d. environmental operating conditions added (Annex B); e. test reference conditions added; f. multiple changes to improve understanding across most clauses; g. derating by manufacturer added; h. safety and EMC tests removed from document and referenced only; i. relay setting and type test guidelines modified (Annex A) j. battery monitor port and low power instrument transformers added.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60255-187-1:2021(Main)
Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers
SIST EN IEC 60255-187-1:2021

IEC 60255-187-1:2021 specifies the minimum requirements for functional and performance evaluation of (longitudinal) differential protection designed for the detection of faults in ac motors, generators and transformers. This document also defines how to document and publish performance test results. This document defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions. The test methodologies for verifying performance characteristics and accuracy are also included in this document. This document, together with IEC 60255-187-2 and IEC 60255-187-3, cancels and replaces IEC 60255-13. This document includes the following significant technical changes with respect to IEC 60255-13: a) IEC 60255-13 has been significantly revised to follow the common structure of the functional standards for protection relays (IEC 60255-1xx series). IEC 60255-187-1 has been developed to address the restrained and unrestrained differential protection of motors, generators and transformers. The revisions include detailed description of the functions including the performance specification, testing and documentation requirements.

  • Standard
    208 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    208 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60255-181:2019(Main)
Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection
SIST EN IEC 60255-181:2020

IEC 60255-181:2019 specifies the minimum requirements for functional and performance evaluation of frequency protection. This document also defines how to document and publish performance test results. This document covers the functions based on frequency measurement or rate of change of frequency measurements. This document also covers frequency protection where additional blocking elements are used. This document defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions. The test methodologies for verifying performance characteristics and accuracy are also included in this document.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-121:2014(Main)
Measuring relays and protection equipment - Part 121: Functional requirements for distance protection
SIST EN 60255-121:2014

IEC 60255-121:2014 specifies minimum requirements for functional and performance evaluation of distance protection function typically used in, but not limited to, line applications for effectively earthed, three-phase power systems. This standard also defines how to document and publish performance tests. This standard covers distance protection function whose operating characteristic can be defined on an impedance plane and includes specification of the protection function, measurement characteristics, phase selection, directionality, starting and time delay characteristics. The test methodologies for verifying performance characteristics and accuracy are included in this standard. The standard defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions. It also includes the instrument transformer requirements for the protection function. The general requirements for measuring relays and protection equipment are defined in IEC 60255-1.

  • Standard
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-27:2014(Main)
Measuring relays and protection equipment - Part 27: Product safety requirements
SIST EN 60255-27:2014

IEC 60255-27:2013 describes the product safety requirements for measuring relays and protection equipment having a rated a.c. voltage up to 1 000 V with a rated frequency up to 65 Hz, or a rated d.c. voltage up to 1 500 V. Above these limits, IEC 60664-1 is applicable for the determination of clearance, creepage distance and withstand test voltage. This standard details essential safety requirements to minimize the risk of fire and hazards caused by electric shock or injury to the user. This new edition includes the following significant technical changes with respect to the previous edition: - the removal of tables and diagrams which are from other standards and referring instead directly to the source standard; - all aspects of IEC 60255-5 have been covered and this standard will be withdrawn.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-127:2014(Main)
Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection
SIST EN 60255-127:2014

IEC 60255-127:2010 specifies minimum requirements for over/under voltage relays. The standard includes specification of the protection function, measurement characteristics and time delay characteristics.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-26:2013/AC:2013(Corrigendum)
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
SIST EN 60255-26:2014/AC:2014

This part of the IEC 60255 series is applicable to measuring relays and protection equipment, taking into account combinations of devices to form schemes for power system protection including the control, monitoring, communication and process interface equipment used with those systems. This standard specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. Tests specified in this standard are not required for equipment not incorporating electronic circuits, for example electromechanical relays. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-149:2013(Main)
Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays
SIST EN 60255-149:2014

IEC 60255-149:2013 specifies minimum requirements for thermal protection relays. This standard includes specification of the protection function, measurement characteristics and test methodologies. The object is to establish a common and reproducible reference for evaluating dependent time relays which protect equipment from thermal damage by measuring a.c. current flowing through the equipment. Complementary input energizing quantities such as ambient, coolant, top oil and winding temperature may be applicable for the thermal protection specification set forth in this standard. This standard covers protection relays based on a thermal model with memory function.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60255-26:2013(Main)
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
SIST EN 60255-26:2014

IEC 60255-26:2013 is applicable to measuring relays and protection equipment, taking into account combinations of devices to form schemes for power system protection including the control, monitoring, communication and process interface equipment used with those systems. This standard specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only. This new edition includes the following significant technical changes with respect to the previous edition: - definition of test specifications, test procedures and acceptance criteria per phenomena and port under test in one document; - extension of radiated emission measurement for frequencies above 1 GHz; - limitation of radiated emission measurement at 3 m distance for small equipment only; - addition of zone A and zone B test level on surge test; - extension of tests on the auxiliary power supply port by a.c. and d.c. voltage dips, a.c. component in d.c. (ripple) and gradual shut-down/start-up; - harmonization of acceptance criteria for immunity tests.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day