Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

2020-12-14 EC letter: citation of EN + A1 put on hold EMC and RED - either to cite with a restriction or TC to povide other solution, link to directives temporary removed
2020-02-19: EC mail with concerns for citation under RED and subsequently also EMC - CCMC proposal to discuss during EC EG RE 2020-03-02
2020-02-07: EC letter acception for citation EMCD
2019-06-06 D163/C005: noting positive assessment, approved Annex ZZ and ZA and asked to make document available
2019-04-24: BT doc prepared
2019-03-32 D162/C065 TC to submit EMC elements to BT
2019-02-01: confirmation of positive assessment for RED and EMCD
2019-01-23 lacking answer, EY Confirmation requested
2019-01-07 EY Confirmation requested
2018-11-30 Discussed with under EY Quality Review: simplifierd AR is inconclusive
2018-09-03: HAS assessment (2018-08-02) : interpreted to be 'Compliant', go to BT for integration in the text of Annexes ZZ
2018-05-22: submitted for assessment on 2018-05-18

Elektromagnetische Verträglichkeit (EMV) - Teil 3-3: Grenzwerte - Begrenzung von Spannungsänderungen, Spannungsschwankungen und Flicker in öffentlichen Niederspannungs-Versorgungsnetzen für Geräte mit einem Bemessungsstrom <= 16 A je Leiter, die keiner Sonderanschlussbedingung unterliegen

Compatibilité électromagnétique (CEM) - Partie 3-3: Limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension, pour les matériels ayant un courant assigné <= 16 A par phase et non soumis à un raccordement conditionnel

Elektromagnetna združljivost (EMC) - 3-3. del: Mejne vrednosti - Omejitev vrednosti kolebanja napetosti in flikerja v nizkonapetostnih napajalnih sistemih za opremo z naznačenim tokom do 16 A in ni priključena pod posebnimi pogoji - Dopolnilo A1

Ta del standarda IEC 61000 obravnava omejitev vrednosti kolebanja napetosti in flikerja v javnih nizkonapetostnih napajalnih sistemih. Določa omejitve vrednosti kolebanja napetosti, ki jih lahko proizvede oprema, preizkušena pod določenimi pogoji, in podaja smernice za metode ocenjevanja. Ta del standarda IEC 61000 se uporablja za električno in elektronsko opremo z vhodnim tokom do vključno 16 A na fazo, ki je namenjena za povezavo z javnimi nizkonapetostnimi razdelilnimi sistemi z napetostjo med linijskim in nevtralnim vodnikom od 220 V do 250 V pri 50 Hz ter ni priključena pod posebnimi pogoji. Če opremo, ki ni v skladu z omejitvami tega dela standarda IEC 61000, preskušate z referenčno impedanco Zref 6,4 in je zato ni mogoče razglasiti za skladno s tem delom, jo lahko znova preskusite oziroma ocenite, ali je skladna s standardom IEC 61000-3-11. Del 3-11 se uporablja za opremo z nazivnim vhodnim tokom ≤ 75 A na fazo in je priključena pod posebnimi pogoji. Preskusi po tem delu so tipski preskusi. Posebni preskusni pogoji so navedeni v dodatku A, preskusni krog pa je prikazan na sliki 1.

General Information

Status
Published
Publication Date
01-Aug-2019
Current Stage
6060 - Document made available
Due Date
02-Aug-2019
Completion Date
02-Aug-2019

RELATIONS

Buy Standard

Amendment
EN 61000-3-3:2014/A1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 61000-3-3:2014/A1:2019
01-november-2019
Elektromagnetna združljivost (EMC) - 3-3. del: Mejne vrednosti - Omejitev

vrednosti kolebanja napetosti in flikerja v nizkonapetostnih napajalnih sistemih za

opremo z naznačenim tokom do 16 A in ni priključena pod posebnimi pogoji -
Dopolnilo A1

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,

voltage fluctuations and flicker in public low-voltage supply systems, for equipment with

rated current <= 16 A per phase and not subject to conditional connection
Elektromagnetische Verträglichkeit (EMV) - Teil 3-3: Grenzwerte - Begrenzung von
Spannungsänderungen, Spannungsschwankungen und Flicker in öffentlichen
Niederspannungs-Versorgungsnetzen für Geräte mit einem Bemessungsstrom <= 16 A
je Leiter, die keiner Sonderanschlussbedingung unterliegen

Compatibilité électromagnétique (CEM) - Partie 3-3: Limites - Limitation des variations

de tension, des fluctuations de tension et du papillotement dans les réseaux publics

d'alimentation basse tension, pour les matériels ayant un courant assigné <= 16 A par

phase et non soumis à un raccordement conditionnel
Ta slovenski standard je istoveten z: EN 61000-3-3:2013/A1:2019
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61000-3-3:2014/A1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61000-3-3:2014/A1:2019
---------------------- Page: 2 ----------------------
SIST EN 61000-3-3:2014/A1:2019
EUROPEAN STANDARD EN 61000-3-3:2013/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 33.100.10
English Version
Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in
public low-voltage supply systems, for equipment with rated
current <= 16 A per phase and not subject to conditional
connection
(IEC 61000-3-3:2013/A1:2017)

Compatibilité électromagnétique (CEM) - Partie 3-3: Limites Elektromagnetische Verträglichkeit (EMV) - Teil 3-3:

- Limitation des variations de tension, des fluctuations de Grenzwerte - Begrenzung von Spannungsänderungen,

tension et du papillotement dans les réseaux publics Spannungsschwankungen und Flicker in öffentlichen

d'alimentation basse tension, pour les matériels ayant un Niederspannungs-Versorgungsnetzen für Geräte mit einem

courant assigné <= 16 A par phase et non soumis à un Bemessungsstrom <= 16 A je Leiter, die keiner

raccordement conditionnel Sonderanschlussbedingung unterliegen
(IEC 61000-3-3:2013/A1:2017) (IEC 61000-3-3:2013/A1:2017)

This amendment A1 modifies the European Standard EN 61000-3-3:2013; it was approved by CENELEC on 2017-06-22. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 61000-3-3:2013/A1:2019 E
---------------------- Page: 3 ----------------------
SIST EN 61000-3-3:2014/A1:2019
EN 61000-3-3:2013/A1:2019 (E)
European foreword

The text of document 77A/952/FDIS, future IEC 61000-3-3:2013/A1, prepared by SC 77A, "EMC — Low-

frequency phenomena", of IEC TC 77, "Electromagnetic compatibility" was submitted to the

IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-3-3:2013/A1:2019.
The following dates are fixed:
• latest date by which the document has (dop) 2020-02-02
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2022-08-02
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission

and the European Free Trade Association, and supports essential requirements of EU Directives.

For the relationship with EU Directives see informative Annexes ZZA and ZZB, which are an integral part

of this document.
Endorsement notice

The text of the International Standard IEC 61000-3-3:2013/A1:2017 was approved by CENELEC as a

European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 61000-3-3:2014/A1:2019
EN 61000-3-3:2013/A1:2019 (E)
Replace Annex ZA of EN 61000-3-3:2013 by the following one:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/TR 60725 2005 Consideration of reference impedances and - -
public supply network impedances for use in
determining disturbance characteristics of
electrical equipment having a rated current
=< 75 A per phase
IEC 60974-1 2017 Arc welding equipment - Part 1: Welding - -
power sources
IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part EN 61000-3-2 2014
3-2: Limits - Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase)
IEC 61000-3-11 2017 Electromagnetic compatibility (EMC) – Part - -
3-11: Limits – Limitation of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply systems – Equipment with
rated current ≤ 75 A and subject to
conditional connection

IEC 61000-4-15 2010 Electromagnetic compatibility (EMC) -- Part EN 61000-4-15 2011

4-15: Testing and measurement techniques
- Flickermeter - Functional and design
specifications
Dated as no equivalent European Standard exists.
---------------------- Page: 5 ----------------------
SIST EN 61000-3-3:2014/A1:2019
EN 61000-3-3:2013/A1:2019 (E)
Annex ZZA
(informative)
Relationship between this European standard and the essential requirements of
Directive 2014/30/EU [2014 OJ L96] aimed to be covered

This European standard has been prepared under the European Commission standardisation request

C(2016) 7641 final of 30.11.2016 , ('M/552'), as regards harmonised standards in support of Directive

2014/30/EU relating to electromagnetic compatibility, to provide one voluntary means of conforming to

essential requirements of Directive 2014/30/EU of the European Parliament and of the Council of 26

February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic

compatibility [2014 OJ L96].
Once this standard is cited in the Official Journal of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.