EN 62135-2:2008
(Main)Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
Specifies test methods to be used in conjunction with CISPR 11 to determine radiofrequency emission; relevant standards and test methods for harmonic current emission, voltage fluctuation and flicker. Also defines immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.
Widerstandsschweißeinrichtungen - Teil 2: Anforderungen an die elektromagnetische Verträglichkeit (EMV)
Matériels de soudage par résistance - Partie 2: Exigences de compatibilité électromagnétique (CEM)
Spécifie les méthodes d'essai à utiliser en conjonction avec la CISPR 11 pour déterminer l'émission radiofréquence; les normes appropriées et les méthodes d'essai pour l'émission de courant harmonique, la fluctuation de tension et papillotement. Définit également les exigences d'immunité et les méthodes d'essai pour les perturbations continues ou transitoires, conduites et rayonnées, y compris les décharges électrostatiques.
Oprema za uporovno varjenje - 2. del: Zahteve za elektromagnetno združljivost (EMC) (IEC 62135-2:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62135-2:2008
01-junij-2008
1DGRPHãþD
SIST EN 50240:2005
Oprema za uporovno varjenje - 2. del: Zahteve za elektromagnetno združljivost
(EMC) (IEC 62135-2:2007)
Resistance welding equipment -- Part 2: Electromagnetic compatibility (EMC)
requirements
Widerstandsschweißeinrichtungen - Teil 2: Anforderungen an die elektromagnetische
Verträglichkeit (EMV)
Matériels de soudage par résistance -- Partie 2: Exigences de compatibilité
électromagnétique (CEM)
Ta slovenski standard je istoveten z: EN 62135-2:2008
ICS:
25.160.30 Varilna oprema Welding equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 62135-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62135-2
NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM
ICS 25.160 Supersedes EN 50240:2004
English version
Resistance welding equipment -
Part 2: Electromagnetic compatibility (EMC) requirements
(IEC 62135-2:2007)
Matériels de soudage par résistance - Widerstandsschweißeinrichtungen -
Partie 2: Exigences de compatibilité Teil 2: Anforderungen an die
électromagnétique (CEM) elektromagnetische Verträglichkeit (EMV)
(CEI 62135-2:2007) (IEC 62135-2:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62135-2:2008 E
---------------------- Page: 2 ----------------------
EN 62135-2:2008 – 2 –
Foreword
The text of document 26/342/CDV, future edition 1 of IEC 62135-2, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC Parallel Unique Acceptance Procedure and was approved
by CENELEC as EN 62135-2 on 2008-02-01.
This European Standard supersedes EN 50240:2004 + corrigendum December 2005.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 2004/108/EC. See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62135-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
– 3 – EN 62135-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60050-161 – International Electrotechnical Vocabulary – –
(IEV) -
Chapter 161: Electromagnetic compatibility
1)
IEC 60050-851 – International Electrotechnical Vocabulary – –
(IEV) -
Chapter 851: Electric welding
IEC 61000-3-2 2005 Electromagnetic compatibility (EMC) - EN 61000-3-2 2006
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.