EN 60077-2:2002

Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules

Provides general rules for all electrotechnical components installed in power circuits, control and indicating circuits on rail rolling stock. It supplements the rules given in part 1 of EN 60077. This part and the part 1 replaces EN 60077 published in 1968.

Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen - Teil 2: Elektrotechnische Bauteile - Allgemeine Regeln

Applications ferroviaires - Equipements électriques du matériel roulant - Partie 2: Composants électrotechniques - Règles générales

Donne, en complément des règles énoncées dans la partie 1, les règles générales applicables à tous les composants électrotechniques installés dans les circuits de puissance, circuits auxiliaires, circuits de commande et de contrôle installés sur le matériel roulant ferroviaire. Cette partie avec la partie 1 remplace la EN 60077 publiée en 1968

Železniške naprave – Električna oprema za vozna sredstva – 2. del: Elektrotehnične komponente – Splošna pravila (IEC 60077-2:1999, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 02-May-2002
• Withdrawal Date: 28-Feb-2005
• ICS: 45.060 - Railway rolling stock
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: CLC/SC 9XB - Electromechanical material on board rolling stock
• Parallel Committee: IEC/TC 9 - IEC_TC_9
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2020
• Completion Date: 01-Sep-2020
• Ref Project: SIST EN 60077-2:2003 - Railway applications - Electric equipment for rolling stock -- Part 2: Electrotechnical components - General rules

Relations

• Replaced By: EN 60077-2:2017 - Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
• Effective Date: 28-Nov-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2003
äHOH]QLãNHQDSUDYH±(OHNWULþQDRSUHPD]DYR]QDVUHGVWYD±GHO
(OHNWURWHKQLþQHNRPSRQHQWH±6SORãQDSUDYLOD,(&VSUHPHQMHQ
Railway applications - Electric equipment for rolling stock -- Part 2: Electrotechnical
components - General rules
Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen -- Teil 2:
Elektrotechnische Bauteile - Allgemeine Regeln
Applications ferroviaires - Equipements électriques du matériel roulant -- Partie 2:
Composants électrotechniques - Règles générales
Ta slovenski standard je istoveten z: EN 60077-2:2002
ICS:
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60077-2
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2002
ICS 45.060
English version
Railway applications -
Electric equipment for rolling stock
Part 2: Electrotechnical components -
General rules
(IEC 60077-2:1999, modified)
Applications ferroviaires - Bahnanwendungen -
Equipements électriques du matériel Elektrische Betriebsmittel
roulant auf Bahnfahrzeugen
Partie 2: Composants électrotechniques - Teil 2: Elektrotechnische Bauteile -
Règles générales Allgemeine Regeln
(CEI 60077-2:1999, modifiée) (IEC 60077-2:1999, modifiziert)

This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60077-2:2002 E
Foreword
The text of the International Standard IEC 60077-2:1999, prepared by IEC TC 9, Electric
railway equipment, together with the common modifications prepared by SC 9XB,
Electromechanical material on board of rolling stock, of Technical Committee CENELEC
TC 9X, Electrical and electronic applications for railways, was submitted to the Unique
Acceptance Procedure and was approved by CENELEC as EN 60077-2 on 2002-03-01.

The following dates were fixed:

- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-03-01

- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01

This Part 2 shall be read in conjunction with EN 60077-1.

In this European Standard the common modifications to the International Standard are
indicated by a vertical line in the left margin of the text.

Subclauses, tables and figures which are additional to those in IEC 60077-2 are prefixed "Z".

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A and ZA are normative and annex B is informative.
Annex ZA has been added by CENELEC.
__________
- 3 - EN 60077-2:2002
Contents
Introduction.6
1 Scope.6
2 Normative references.7
3 Definitions.7
3.1 Components.7
3.2 Component parts.8
3.3 Operational features.10
4 Classification.13
5 Characteristics.13
5.1 List of characteristics.13
5.2 Type of component.13
5.3 Rated and limiting values for the main circuit.13
5.3.1 General.13
5.3.2 Rated voltages.14
5.3.3 Rated currents.14
5.3.4 Rated time constants (for d.c. switchgear) .14
5.3.5 Rated power factor (for a.c. switchgear).14
5.4 Operational frequency classes .15
5.5 Component categories.15
5.6 Electric control circuits.15
5.7 Pneumatic control circuits .16
5.8 Manual control.16
5.9 Electric auxiliary circuits .16
5.10 Pneumatic auxiliary circuits .16
5.11 Peak arc voltages.16
6 Product information.17
6.1 Nature of information.17
6.1.1 Component documentation.17
6.1.2 Other information.18
6.2 Marking .18
6.3 Instructions for storage, installation, operation and maintenance .18
7 Normal service conditions.18
8 Constructional and performance requirements.18
8.1 Constructional requirements.18
8.1.1 Terminals and connecting capacity .18
8.1.2 Bonding terminal.19

8.2 Performance requirements.19
8.2.1 Operating conditions.19
8.2.2 Temperature rise.20
8.2.3 Operation following inactivity.20
8.2.4 Electromagnetic compatibility (EMC).20
8.2.5 Acoustic noise emission .20
8.2.6 Dielectric properties.20
8.2.7 Switching overvoltages.21
8.2.8 Operational performance capability.21
8.2.9 Ability to withstand vibration and shock.23
8.2.10 Ability to withstand short-time current.23
9 Tests.23
9.1 Kinds of tests.23
9.2 Verification of constructional requirements.24
9.3 Type tests.24
9.3.1 Test sequences.24
9.3.2 General test conditions.24
9.3.3 Test sequence I: general performance characteristics.25
9.3.4 Test sequence II: ability to withstand vibration and shock.26
9.3.5 Test sequence III: critical currents.27
9.3.6 Test sequence IV: climatic conditions .27
9.3.7 Test sequence V: other tests.28
9.4 Routine tests.28
9.4.1 General.28
9.4.2 Mechanical operation.28
9.4.3 Measurement of resistance or impedance .28
9.4.4 Air-tightness (for pneumatic components).28
9.4.5 Dielectric withstand.28
9.4.6 Check on the setting and operation of protective equipment and relays
(calibration).28

Annex A (normative) Correspondence between auxiliary contacts and steady states
of switchgear .29
Annex B (informative) Bibliography .31
Annex ZA (normative) Normative references to international publications with their
corresponding European publications.32

- 5 - EN 60077-2:2002
Figures
Figure A.1  Relationship between auxiliary contacts and steady states of switchgear .30

Tables
Table 1  Rated time constants.14
Table 2  Temperature rise limits and temperature limits .20
Table 3  Operational performance capability for category A1 component .22
Table 4  Operational performance capability for category A2 component .22
Table 5  Operational performance capability for category A3 component .23
Table 6  Operational performance capability for category A4 component .23
Table 7  List of test sequences.24
Table 8  Tolerances on test values .25

Introduction
This product standard is Part 2 of the EN 60077 series of product standards:
Railway applications - Electric equipment for rolling stock
- Part 1: General service conditions and general rules,
- Part 2: Electrotechnical components - General rules,
- Part 3: Electrotechnical components - Rules for d.c. circuit-breakers,
- Part 4: Electrotechnical components - Rules for a.c. circuit-breakers,
- Part 5: Electrotechnical components - Rules for HV fuses.

This document has used IEC 60077-2 as its base and its form and structure have been
modified to take account of already existing European Standards covering related subjects.

1 Scope
In addition to the rules given in EN 60077-1, this European standard provides general rules
for all electrotechnical components installed in power circuits, auxiliary circuits and control
circuits, etc., on rolling stock.

NOTE Certain of these rules may, a
...