Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses

IEC 60077-5:2019 is available as IEC 60077-5:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60077-5:2019 give additional or amended rules for high voltage (HV) fuses as a supplement to those given by IEC 60077-2. The high voltage fuses concerned are those connected into power and/or auxiliary circuits. The nominal voltage of these circuits lies between 600 V DC and 3 000 V DC, according to IEC 60850. These fuses can also be used in auxiliary AC circuits up to a nominal voltage of 1 500 V. This document together with IEC 60077-2 states specifically: a) the characteristics of the fuses; b) the service conditions with which the fuses comply with reference to: - operation and behaviour in normal service; - operation and behaviour in case of short circuit; - dielectric properties. c) the tests intended for confirming the compliance of the fuse with the characteristics under the service conditions and the methods adopted for these tests; d) the information marked on, or given with, the fuse. This second edition cancels and replaces the first edition, issued in 2003. This edition includes the following main technical changes with regard to the previous edition: a) test method of test duty III for verification of breaking capacity is reviewed.

Bahnanwendungen - Elektrische Betriebsmittel auf Fahrzeugen - Teil 5: Elektrotechnische Bauteile - Regeln für Hochspannungssicherungen

Applications ferroviaires - Équipements électriques du matériel roulant - Partie 5: Composants électrotechniques - Règles pour les fusibles à haute tension

IEC 60077-5:2019 est disponible sous forme de IEC 60077-5:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60077-5:2019 fournir des règles complémentaires ou amendées pour les fusibles à haute tension, en plus de celles données dans l'IEC 60077-2. Les fusibles à haute tension concernés sont connectés dans les circuits de puissance et/ou auxiliaires. La tension nominale de ces circuits est située entre 600 V CC et 3 000 V CC, conformément à l'IEC 60850. Ces fusibles peuvent également être utilisés dans des circuits auxiliaires à courant alternatif jusqu'à une tension nominale de 1 500 V. En complément de l'IEC 60077-2, le présent document précise particulièrement: a) les caractéristiques des fusibles; b) les conditions de service que les fusibles supportent du point de vue: - du fonctionnement et du comportement en service normal; - du fonctionnement et du comportement en cas de court-circuit; - des propriétés diélectriques. c) les essais destinés à vérifier la conformité du fusible avec les caractéristiques dans les conditions de service ainsi que les méthodes à adopter pour ces essais; d) les informations données avec ou marquées sur le fusible. Cette deuxième édition annule et remplace la première édition, parue en 2003. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) révision de la méthode d'essai des conditions d'essai III pour la vérification du pouvoir de coupure.

Železniške naprave - Električna oprema za vozna sredstva - 5. del: Elektrotehnične komponente - Pravila za visokonapetostne varovalke

General Information

Status
Published
Publication Date
19-Dec-2019
Withdrawal Date
03-Dec-2022
Current Stage
6060 - Document made available - Publishing
Start Date
20-Dec-2019
Completion Date
20-Dec-2019

Relations

Buy Standard

Standard
EN IEC 60077-5:2020
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60077-5:2020
01-julij-2020
Nadomešča:
SIST EN 60077-5:2004
Železniške naprave - Električna oprema za vozna sredstva - 5. del: Elektrotehnične
komponente - Pravila za visokonapetostne varovalke
Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical
components - Rules for HV fuses
Applications ferroviaires - Equipements électriques du matériel roulant - Partie 5:
Composants électrotechniques - Règles pour les fusibles à haute tension
Ta slovenski standard je istoveten z: EN IEC 60077-5:2019
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
29.280 Električna vlečna oprema Electric traction equipment
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN IEC 60077-5:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60077-5:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60077-5:2020


EUROPEAN STANDARD EN IEC 60077-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2019
ICS 45.060 Supersedes EN 60077-5:2003 and all of its amendments
and corrigenda (if any)
English Version
Railway applications - Electric equipment for rolling stock - Part
5: Electrotechnical components - Rules for HV fuses
(IEC 60077-5:2019)
Applications ferroviaires - Équipements électriques du Bahnanwendungen - Elektrische Betriebsmittel auf
matériel roulant - Partie 5: Composants électrotechniques - Fahrzeugen - Teil 5: Elektrotechnische Bauteile - Regeln für
Règles pour les fusibles à haute tension Hochspannungssicherungen
(IEC 60077-5:2019) (IEC 60077-5:2019)
This European Standard was approved by CENELEC on 2019-12-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60077-5:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60077-5:2020
EN IEC 60077-5:2019 (E)
European foreword
The text of document 9/2539/FDIS, future edition 2 of IEC 60077-5, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60077-5:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-12-04
document have to be withdrawn

This document supersedes EN 60077-5:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60077-5:2019 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 60077-5:2020
EN IEC 60077-5:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.